[ 15/69] ARC: SMP failed to boot due to missing IVT setup

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Noam Camus <noamc@ezchip.com>

commit c3567f8a359b7917dcffa442301f88ed0a75211f upstream.

Commit 05b016ecf5e7a "ARC: Setup Vector Table Base in early boot" moved
the Interrupt vector Table setup out of arc_init_IRQ() which is called
for all CPUs, to entry point of boot cpu only, breaking booting of others.

Fix by adding the same to entry point of non-boot CPUs too.

read_arc_build_cfg_regs() printing IVT Base Register didn't help the
casue since it prints a synthetic value if zero which is totally bogus,
so fix that to print the exact Register.

[vgupta: Remove the now stale comment from header of arc_init_IRQ and
also added the commentary for halt-on-reset]

Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arc/include/asm/sections.h |    1 -
 arch/arc/kernel/head.S          |    5 +++++
 arch/arc/kernel/irq.c           |    1 -
 arch/arc/kernel/setup.c         |    3 ---
 4 files changed, 5 insertions(+), 5 deletions(-)

--- a/arch/arc/include/asm/sections.h
+++ b/arch/arc/include/asm/sections.h
@@ -11,7 +11,6 @@
 
 #include <asm-generic/sections.h>
 
-extern char _int_vec_base_lds[];
 extern char __arc_dccm_base[];
 extern char __dtb_start[];
 
--- a/arch/arc/kernel/head.S
+++ b/arch/arc/kernel/head.S
@@ -34,6 +34,9 @@ stext:
 	;	IDENTITY Reg [ 3  2  1  0 ]
 	;	(cpu-id)             ^^^	=> Zero for UP ARC700
 	;					=> #Core-ID if SMP (Master 0)
+	; Note that non-boot CPUs might not land here if halt-on-reset and
+	; instead breath life from @first_lines_of_secondary, but we still
+	; need to make sure only boot cpu takes this path.
 	GET_CPU_ID  r5
 	cmp	r5, 0
 	jnz	arc_platform_smp_wait_to_boot
@@ -98,6 +101,8 @@ stext:
 
 first_lines_of_secondary:
 
+	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
+
 	; setup per-cpu idle task as "current" on this CPU
 	ld	r0, [@secondary_idle_tsk]
 	SET_CURR_TASK_ON_CPU  r0, r1
--- a/arch/arc/kernel/irq.c
+++ b/arch/arc/kernel/irq.c
@@ -24,7 +24,6 @@
  * -Needed for each CPU (hence not foldable into init_IRQ)
  *
  * what it does ?
- * -setup Vector Table Base Reg - in case Linux not linked at 0x8000_0000
  * -Disable all IRQs (on CPU side)
  * -Optionally, setup the High priority Interrupts as Level 2 IRQs
  */
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -47,10 +47,7 @@ void __cpuinit read_arc_build_cfg_regs(v
 	READ_BCR(AUX_IDENTITY, cpu->core);
 
 	cpu->timers = read_aux_reg(ARC_REG_TIMERS_BCR);
-
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
-	if (cpu->vec_base == 0)
-		cpu->vec_base = (unsigned int)_int_vec_base_lds;
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
 	cpu->uncached_base = uncached_space.start << 24;