From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Mikulas Patocka <mpatocka@redhat.com>,
Mike Snitzer <snitzer@redhat.com>,
Alasdair G Kergon <agk@redhat.com>
Subject: [PATCH 3.10 44/54] dm snapshot: fix data corruption
Date: Fri, 1 Nov 2013 15:04:12 -0700 [thread overview]
Message-ID: <20131101220216.274008655@linuxfoundation.org> (raw)
In-Reply-To: <20131101220211.311926234@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mpatocka@redhat.com>
commit e9c6a182649f4259db704ae15a91ac820e63b0ca upstream.
This patch fixes a particular type of data corruption that has been
encountered when loading a snapshot's metadata from disk.
When we allocate a new chunk in persistent_prepare, we increment
ps->next_free and we make sure that it doesn't point to a metadata area
by further incrementing it if necessary.
When we load metadata from disk on device activation, ps->next_free is
positioned after the last used data chunk. However, if this last used
data chunk is followed by a metadata area, ps->next_free is positioned
erroneously to the metadata area. A newly-allocated chunk is placed at
the same location as the metadata area, resulting in data or metadata
corruption.
This patch changes the code so that ps->next_free skips the metadata
area when metadata are loaded in function read_exceptions.
The patch also moves a piece of code from persistent_prepare_exception
to a separate function skip_metadata to avoid code duplication.
CVE-2013-4299
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/dm-snap-persistent.c | 18 ++++++++++++------
1 file changed, 12 insertions(+), 6 deletions(-)
--- a/drivers/md/dm-snap-persistent.c
+++ b/drivers/md/dm-snap-persistent.c
@@ -269,6 +269,14 @@ static chunk_t area_location(struct psto
return NUM_SNAPSHOT_HDR_CHUNKS + ((ps->exceptions_per_area + 1) * area);
}
+static void skip_metadata(struct pstore *ps)
+{
+ uint32_t stride = ps->exceptions_per_area + 1;
+ chunk_t next_free = ps->next_free;
+ if (sector_div(next_free, stride) == NUM_SNAPSHOT_HDR_CHUNKS)
+ ps->next_free++;
+}
+
/*
* Read or write a metadata area. Remembering to skip the first
* chunk which holds the header.
@@ -502,6 +510,8 @@ static int read_exceptions(struct pstore
ps->current_area--;
+ skip_metadata(ps);
+
return 0;
}
@@ -616,8 +626,6 @@ static int persistent_prepare_exception(
struct dm_exception *e)
{
struct pstore *ps = get_info(store);
- uint32_t stride;
- chunk_t next_free;
sector_t size = get_dev_size(dm_snap_cow(store->snap)->bdev);
/* Is there enough room ? */
@@ -630,10 +638,8 @@ static int persistent_prepare_exception(
* Move onto the next free pending, making sure to take
* into account the location of the metadata chunks.
*/
- stride = (ps->exceptions_per_area + 1);
- next_free = ++ps->next_free;
- if (sector_div(next_free, stride) == 1)
- ps->next_free++;
+ ps->next_free++;
+ skip_metadata(ps);
atomic_inc(&ps->pending_count);
return 0;
next prev parent reply other threads:[~2013-11-01 22:05 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-01 22:03 [PATCH 3.10 00/54] 3.10.18-stable review Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 01/54] tcp: TSO packets automatic sizing Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 02/54] tcp: TSQ can use a dynamic limit Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 03/54] tcp: must unclone packets before mangling them Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 04/54] tcp: do not forget FIN in tcp_shifted_skb() Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 05/54] tcp: fix incorrect ca_state in tail loss probe Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 06/54] net: do not call sock_put() on TIMEWAIT sockets Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 07/54] l2tp: fix kernel panic when using IPv4-mapped IPv6 addresses Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 08/54] l2tp: Fix build warning with ipv6 disabled Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 09/54] net: mv643xx_eth: update statistics timer from timer context only Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 10/54] net: mv643xx_eth: fix orphaned statistics timer crash Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 11/54] net: heap overflow in __audit_sockaddr() Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 12/54] proc connector: fix info leaks Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 13/54] ipv4: fix ineffective source address selection Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 14/54] can: dev: fix nlmsg size calculation in can_get_size() Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 15/54] net: secure_seq: Fix warning when CONFIG_IPV6 and CONFIG_INET are not selected Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 16/54] xen-netback: Dont destroy the netdev until the vif is shut down Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 17/54] net: vlan: fix nlmsg size calculation in vlan_get_size() Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 18/54] vti: get rid of nf mark rule in prerouting Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 19/54] l2tp: must disable bh before calling l2tp_xmit_skb() Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 20/54] farsync: fix info leak in ioctl Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 21/54] unix_diag: fix info leak Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 22/54] connector: use nlmsg_len() to check message length Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 23/54] bnx2x: record rx queue for LRO packets Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 24/54] virtio-net: dont respond to cpu hotplug notifier if were not ready Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 25/54] virtio-net: fix the race between channels setting and refill Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 26/54] virtio-net: refill only when device is up during setting queues Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 27/54] bridge: Correctly clamp MAX forward_delay when enabling STP Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 28/54] net: dst: provide accessor function to dst->xfrm Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 29/54] sctp: Use software crc32 checksum when xfrm transform will happen Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 30/54] sctp: Perform software checksum if packet has to be fragmented Greg Kroah-Hartman
2013-11-01 22:03 ` [PATCH 3.10 31/54] wanxl: fix info leak in ioctl Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 32/54] be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 33/54] net: unix: inherit SOCK_PASS{CRED, SEC} flags from socket to fix race Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 34/54] net: fix cipso packet validation when !NETLABEL Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 35/54] inet: fix possible memory corruption with UDP_CORK and UFO Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 36/54] ipv6: always prefer rt6i_gateway if present Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 37/54] ipv6: fill rt6i_gateway with nexthop address Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 38/54] netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 39/54] ipv6: probe routes asynchronous in rt6_probe Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 40/54] davinci_emac.c: Fix IFF_ALLMULTI setup Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 41/54] ARM: 7851/1: check for number of arguments in syscall_get/set_arguments() Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 42/54] ARM: integrator: deactivate timer0 on the Integrator/CP Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 43/54] gpio/lynxpoint: check if the interrupt is enabled in IRQ handler Greg Kroah-Hartman
2013-11-01 22:04 ` Greg Kroah-Hartman [this message]
2013-11-01 22:04 ` [PATCH 3.10 45/54] i2c: ismt: initialize DMA buffer Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 46/54] mm: fix BUG in __split_huge_page_pmd Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 47/54] ALSA: us122l: Fix pcm_usb_stream mmapping regression Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 48/54] ALSA: hda - Fix inverted internal mic not indicated on some machines Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 49/54] writeback: fix negative bdi max pause Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 50/54] wireless: radiotap: fix parsing buffer overrun Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 51/54] serial: vt8500: add missing braces Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 52/54] USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 53/54] USB: serial: option: add support for Inovia SEW858 device Greg Kroah-Hartman
2013-11-01 22:04 ` [PATCH 3.10 54/54] usb: serial: option: blacklist Olivetti Olicard200 Greg Kroah-Hartman
2013-11-02 2:30 ` [PATCH 3.10 00/54] 3.10.18-stable review Guenter Roeck
2013-11-02 21:32 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131101220216.274008655@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=agk@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpatocka@redhat.com \
--cc=snitzer@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox