From: Jens Axboe <axboe@kernel.dk>
To: Dave Chinner <david@fromorbit.com>
Cc: Shaohua Li <shli@kernel.org>, linux-kernel@vger.kernel.org
Subject: Re: [Regression x2, 3.13-git] virtio block mq hang, iostat busted on virtio devices
Date: Tue, 19 Nov 2013 20:12:48 -0700 [thread overview]
Message-ID: <20131120031248.GA28819@kernel.dk> (raw)
In-Reply-To: <20131120025301.GT11434@dastard>
On Wed, Nov 20 2013, Dave Chinner wrote:
> On Tue, Nov 19, 2013 at 07:02:30PM -0700, Jens Axboe wrote:
> > On Tue, Nov 19 2013, Jens Axboe wrote:
> > > > Looks like a race condition, below works for me, please try.
> > > >
> > > >
> > > > Subject: virtio_blk: fix race condition
> > > >
> > > > virtqueue_kick() isn't multi-thread safe.
> > > >
> > > > Signed-off-by: Shaohua Li <shli@fusionio.com>
> > > >
> > > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> > > > index 588479d..f353959 100644
> > > > --- a/drivers/block/virtio_blk.c
> > > > +++ b/drivers/block/virtio_blk.c
> > > > @@ -204,10 +204,11 @@ static int virtio_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *req)
> > > > virtqueue_kick(vblk->vq);
> > > > return BLK_MQ_RQ_QUEUE_BUSY;
> > > > }
> > > > - spin_unlock_irqrestore(&vblk->vq_lock, flags);
> > > >
> > > > if (last)
> > > > virtqueue_kick(vblk->vq);
> > > > + spin_unlock_irqrestore(&vblk->vq_lock, flags);
> > > > +
> > > > return BLK_MQ_RQ_QUEUE_OK;
> > > > }
> > >
> > > Just stumbled on that too. You need one more, btw, for the sg failure
> > > case:
> > >
> > >
> > > diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
> > > index 588479d58f52..6a680d4de7f1 100644
> > > --- a/drivers/block/virtio_blk.c
> > > +++ b/drivers/block/virtio_blk.c
> > > @@ -199,15 +199,16 @@ static int virtio_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *req)
> > >
> > > spin_lock_irqsave(&vblk->vq_lock, flags);
> > > if (__virtblk_add_req(vblk->vq, vbr, vbr->sg, num) < 0) {
> > > + virtqueue_kick(vblk->vq);
> > > spin_unlock_irqrestore(&vblk->vq_lock, flags);
> > > blk_mq_stop_hw_queue(hctx);
> > > - virtqueue_kick(vblk->vq);
> > > return BLK_MQ_RQ_QUEUE_BUSY;
> > > }
> > > - spin_unlock_irqrestore(&vblk->vq_lock, flags);
> > >
> > > if (last)
> > > virtqueue_kick(vblk->vq);
> > > +
> > > + spin_unlock_irqrestore(&vblk->vq_lock, flags);
> > > return BLK_MQ_RQ_QUEUE_OK;
> > > }
> >
> > Tested successfully here too.
>
> Ah, so it is exactly the problem I suggested it might be. ;)
It isn't actually, it's not a race between the queue conditions, the
stopping/starting etc or inside/outside lock state checking. It's a
"simple" race between the virtqueue operations. It is a race, however,
but I think that one was given :-)
> > Dave, please give it a go, looks like this
> > should fix it up for you. Committed here:
> >
> > http://git.kernel.dk/?p=linux-block.git;a=commit;h=f02b9ac35a47dff745c7637fbc095f01cc03646e
>
> Testing it now. might take a little while to confirm given it had
> taken a few iterations of xfstests before I tripped over it...
I feel pretty confident in it, fwiw. My test case was boiled down to
trigger it in seconds, and it survived a lengthy run afterwards.
--
Jens Axboe
next prev parent reply other threads:[~2013-11-20 3:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 8:02 [Regression x2, 3.13-git] virtio block mq hang, iostat busted on virtio devices Dave Chinner
2013-11-19 10:36 ` Christoph Hellwig
2013-11-19 16:05 ` Jens Axboe
2013-11-19 16:09 ` Christoph Hellwig
2013-11-19 16:16 ` Jens Axboe
2013-11-19 21:30 ` Dave Chinner
2013-11-19 21:40 ` Jens Axboe
2013-11-19 20:15 ` Jens Axboe
2013-11-19 21:20 ` Jens Axboe
2013-11-19 21:34 ` Dave Chinner
2013-11-19 21:43 ` Jens Axboe
2013-11-19 22:42 ` Jens Axboe
2013-11-19 22:51 ` Jens Axboe
2013-11-19 23:23 ` Dave Chinner
2013-11-19 23:59 ` Jens Axboe
2013-11-20 0:08 ` Jens Axboe
2013-11-20 1:44 ` Shaohua Li
2013-11-20 1:54 ` Jens Axboe
2013-11-20 2:02 ` Jens Axboe
2013-11-20 2:53 ` Dave Chinner
2013-11-20 3:12 ` Jens Axboe [this message]
2013-11-20 8:07 ` Christoph Hellwig
2013-11-20 16:21 ` Jens Axboe
2013-11-20 8:04 ` Christoph Hellwig
2013-11-20 16:20 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131120031248.GA28819@kernel.dk \
--to=axboe@kernel.dk \
--cc=david@fromorbit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=shli@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).