From: Dave Chinner <david@fromorbit.com>
To: linux-kernel@vger.kernel.org
Cc: Jens Axboe <axboe@kernel.dk>
Subject: [OOPS, 3.13-rc2] null ptr in dio_complete()
Date: Wed, 4 Dec 2013 08:59:40 +1100 [thread overview]
Message-ID: <20131203215940.GX10988@dastard> (raw)
Hi Jens,
Not sure who to direct this to or CC, so I figured you are the
person to do that. I just had xfstests generic/299 (an AIO/DIO test)
oops in dio_complete() like so:
[ 9650.586724] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 9650.590131] Modules linked in:
[ 9650.590630] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-rc2-dgc+ #73
[ 9650.590630] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 9650.590630] task: ffffffff81f35480 ti: ffffffff81f24000 task.ti: ffffffff81f24000
[ 9650.590630] RIP: 0010:[<ffffffff811ee5f1>] [<ffffffff811ee5f1>] aio_complete+0xb1/0x1e0
[ 9650.590630] RSP: 0018:ffff88007f803cf8 EFLAGS: 00010003
[ 9650.590630] RAX: 0000000000000086 RBX: ffff8800688ae000 RCX: 0000000000d6d6d6
[ 9650.590630] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000001000 RDI: ffff8800688ae1c4
[ 9650.590630] RBP: ffff88007f803d28 R08: 0000000000000000 R09: 000000006b6b6b6c
[ 9650.590630] R10: ff79a1a35779b009 R11: 0000000000000010 R12: ffff88006953a540
[ 9650.590630] R13: 0000000000001000 R14: 0000000000000000 R15: ffff8800688ae1c4
[ 9650.590630] FS: 0000000000000000(0000) GS:ffff88007f800000(0000) knlGS:0000000000000000
[ 9650.590630] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 9650.590630] CR2: 00007ffa9c48448f CR3: 0000000028061000 CR4: 00000000000006f0
[ 9650.590630] Stack:
[ 9650.590630] ffff88007f803d18 0000000000001000 ffff880068b80800 0000000000001000
[ 9650.590630] 0000000000000001 0000000031f6d000 ffff88007f803d68 ffffffff811ddae3
[ 9650.590630] 0000000000000086 ffff880068b80800 0000000000000000 ffff880068b80828
[ 9650.590630] Call Trace:
[ 9650.590630] <IRQ>
[ 9650.590630] [<ffffffff811ddae3>] dio_complete+0xa3/0x140
[ 9650.590630] [<ffffffff811ddc2a>] dio_bio_end_aio+0x7a/0x110
[ 9650.590630] [<ffffffff811ddbb5>] ? dio_bio_end_aio+0x5/0x110
[ 9650.590630] [<ffffffff811d8a9d>] bio_endio+0x1d/0x30
[ 9650.590630] [<ffffffff8175d65f>] blk_mq_complete_request+0x5f/0x120
[ 9650.590630] [<ffffffff8175d736>] __blk_mq_end_io+0x16/0x20
[ 9650.590630] [<ffffffff8175d7a8>] blk_mq_end_io+0x68/0xd0
[ 9650.590630] [<ffffffff818539a7>] virtblk_done+0x67/0x110
[ 9650.590630] [<ffffffff817f74c5>] vring_interrupt+0x35/0x60
[ 9650.590630] [<ffffffff810e4e34>] handle_irq_event_percpu+0x54/0x1e0
[ 9650.590630] [<ffffffff810e5008>] handle_irq_event+0x48/0x70
[ 9650.590630] [<ffffffff8107d6f5>] ? kvm_guest_apic_eoi_write+0x5/0x50
[ 9650.590630] [<ffffffff810e7807>] handle_edge_irq+0x77/0x110
[ 9650.590630] [<ffffffff8104796f>] handle_irq+0xbf/0x150
[ 9650.590630] [<ffffffff810478b5>] ? handle_irq+0x5/0x150
[ 9650.590630] [<ffffffff81aee136>] ? atomic_notifier_call_chain+0x16/0x20
[ 9650.590630] [<ffffffff81af43ca>] do_IRQ+0x5a/0xe0
[ 9650.590630] [<ffffffff81aea16d>] common_interrupt+0x6d/0x6d
[ 9650.590630] <EOI>
[ 9650.590630] [<ffffffff8107e616>] ? native_safe_halt+0x6/0x10
[ 9650.590630] [<ffffffff8104e4f5>] ? default_idle+0x5/0xc0
[ 9650.590630] [<ffffffff8104e50f>] default_idle+0x1f/0xc0
[ 9650.590630] [<ffffffff8104edb6>] arch_cpu_idle+0x26/0x30
[ 9650.590630] [<ffffffff810e4331>] cpu_startup_entry+0x81/0x240
[ 9650.590630] [<ffffffff81ad5d67>] rest_init+0x77/0x80
[ 9650.590630] [<ffffffff8203ceec>] start_kernel+0x3cd/0x3da
[ 9650.590630] [<ffffffff8203c91e>] ? repair_env_string+0x5e/0x5e
[ 9650.590630] [<ffffffff8203c117>] ? early_idt_handlers+0x117/0x120
[ 9650.590630] [<ffffffff8203c5c2>] x86_64_start_reservations+0x2a/0x2c
[ 9650.590630] [<ffffffff8203c70a>] x86_64_start_kernel+0x146/0x155
[ 9650.590630] Code: e8 05 b5 8f 00 44 8b 8b c0 01 00 00 45 31 c0 48 8b 93 98 00 00 00 41 83 c1 01 44 3b 8b 80 00 00 00 44 89 c9 45 0f 42 c1 c1 e9 07 <48> 8b 0c ca 65
[ 9650.590630] RIP [<ffffffff811ee5f1>] aio_complete+0xb1/0x1e0
[ 9650.590630] RSP <ffff88007f803cf8>
I'm not sure if it is related to blk_mq, virtio, dio or bio changes
(or even somethign else), but I haven't seen anything like this
before. I've only seen it once so far (haven't rerun the test yet at
all).
FWIW, I'd also like to point out that I'm seeing XFS on the
virtio stack get perilously close to blowing the stack on 3.13-rc2:
[ 387.048771] fill (11196) used greatest stack depth: 1048 bytes left
This is new - on 3.12 generally the output would be around 2500
bytes left, so somewhere below of XFS there a lot more stack being
consumed in the IO path on 3.13. I'll do some more tracing of this
to try to find out where it is all going....
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
next reply other threads:[~2013-12-03 21:59 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-03 21:59 Dave Chinner [this message]
2013-12-04 1:58 ` [OOPS, 3.13-rc2] null ptr in dio_complete() Dave Chinner
2013-12-04 3:38 ` Dave Chinner
2013-12-04 3:47 ` Jens Axboe
2013-12-04 4:17 ` Dave Chinner
2013-12-04 23:56 ` Dave Chinner
2013-12-05 3:41 ` Jens Axboe
2013-12-05 4:49 ` Dave Chinner
2013-12-05 14:22 ` Ming Lei
2013-12-05 15:57 ` Jens Axboe
2013-12-05 21:26 ` Dave Chinner
2013-12-05 23:16 ` Dave Chinner
2013-12-06 16:46 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131203215940.GX10988@dastard \
--to=david@fromorbit.com \
--cc=axboe@kernel.dk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox