From: Thomas Glanzmann <thomas@glanzmann.de>
To: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Ben Skeggs <bskeggs@redhat.com>,
LKML <linux-kernel@vger.kernel.org>,
"nouveau@lists.freedesktop.org" <nouveau@lists.freedesktop.org>
Subject: Re: Regression: drm/nouveau/clk: implement power state and engine clock control in core (7c856522069755ab9d163a24ac332cd3cb35fe30) breaks GeForce 9400 on Intel Mac Mini Model November 2010 model
Date: Fri, 6 Dec 2013 14:30:15 +0100 [thread overview]
Message-ID: <20131206133015.GA27211@glanzmann.de> (raw)
In-Reply-To: <CAKb7Uvht8=ydSgCe-mKpoR3LRvf1KJw2_CAV_0zeh2t4nt9nww@mail.gmail.com>
Hello Ilia,
> > [ 7.569394] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0ac080b1
> > [ 7.569460] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP79/MCP7A (NVAC)
> > [ 7.569530] nouveau [ DEVICE][0000:02:00.0] Family : NV50
> > [ 7.571151] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
> > [ 7.633082] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
> > [ 7.633155] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
> > [ 7.633468] nouveau [ VBIOS][0000:02:00.0] BIT signature found
> > [ 7.633533] nouveau [ VBIOS][0000:02:00.0] version 62.79.4e.00.01
> > [ 7.654309] nouveau [ PMC][0000:02:00.0] MSI interrupts enabled
> > [ 7.654417] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
> > [ 7.654481] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
> > [ 7.654546] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
> > [ 7.687282] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external
> > [ 7.687366] nouveau [ PTHERM][0000:02:00.0] fan management: automatic
> > [ 7.687429] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
> > [ 7.687500] nouveau [ CLK][0000:02:00.0] 03: core 150 MHz shader 300 MHz
> > [ 7.687575] nouveau [ CLK][0000:02:00.0] 05: core 150 MHz shader 300 MHz
> > [ 7.687648] nouveau [ CLK][0000:02:00.0] 0e: core 350 MHz shader 800 MHz
> > [ 7.687721] nouveau [ CLK][0000:02:00.0] 0f: core 450 MHz shader 1100 MHz
> > [ 7.687806] nouveau E[ CLK][0000:02:00.0] 17 freq unknown
> > [ 7.687867] nouveau E[ CLK][0000:02:00.0] init failed, -22
> http://lists.freedesktop.org/archives/nouveau/2013-December/015304.html
thank you. I tried to cherry pick this patch on top of Linux tip, but
was not able to:
CC [M] drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.o
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:478:8: error: redefinition of 'struct nvaa_clock_priv'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:33:8: note: originally defined here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:488:1: error: redefinition of 'read_div'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:43:1: note: previous definition of 'read_div' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:494:1: error: redefinition of 'read_pll'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:49:1: note: previous definition of 'read_pll' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:525:1: error: redefinition of 'nvaa_clock_read'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:80:1: note: previous definition of 'nvaa_clock_read' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:607:1: error: conflicting types for 'calc_pll'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:162:1: note: previous definition of 'calc_pll' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:628:1: error: redefinition of 'calc_P'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:183:1: note: previous definition of 'calc_P' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:646:1: error: redefinition of 'nvaa_clock_calc'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:201:1: note: previous definition of 'nvaa_clock_calc' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:744:1: error: redefinition of 'nvaa_clock_prog'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:299:1: note: previous definition of 'nvaa_clock_prog' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:847:1: error: redefinition of 'nvaa_clock_tidy'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:402:1: note: previous definition of 'nvaa_clock_tidy' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:852:1: error: redefinition of 'nvaa_domains'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:407:1: note: previous definition of 'nvaa_domains' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:862:1: error: redefinition of 'nvaa_clock_ctor'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:417:1: note: previous definition of 'nvaa_clock_ctor' was here
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:882:1: error: redefinition of 'nvaa_clock_oclass'
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c:437:1: note: previous definition of 'nvaa_clock_oclass' was here
make[4]: *** [drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.o] Error 1
make[3]: *** [drivers/gpu/drm/nouveau] Error 2
make[2]: *** [drivers/gpu/drm] Error 2
make[1]: *** [drivers/gpu] Error 2
make: *** [drivers] Error 2
Probably I'm missing a dependency.
Than I checked out drm-nouveau-next of
git://anongit.freedesktop.org/nouveau/linux-2.6 and tried again. This time it
worked. Thank you. Will the fix wander to upstream before v3.13?
Otherwise I would appreciate a heads-up when it wanders upstream, so
that I can test again.
[ 7.964230] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0ac080b1
[ 7.964232] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP79/MCP7A (NVAC)
[ 7.964233] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 7.965828] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 8.027695] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 8.027769] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 8.028070] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 8.028134] nouveau [ VBIOS][0000:02:00.0] version 62.79.4e.00.01
[ 8.061976] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 8.062051] nouveau [ PFB][0000:02:00.0] RAM size: 256 MiB
[ 8.062122] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 8.086562] [TTM] Zone kernel: Available graphics memory: 1887908 kiB
[ 8.086633] [TTM] Initializing pool allocator
[ 8.086707] [TTM] Initializing DMA pool allocator
[ 8.088703] nouveau [ DRM] VRAM: 256 MiB
[ 8.088774] nouveau [ DRM] GART: 512 MiB
[ 8.088843] nouveau [ DRM] BIT BIOS found
[ 8.088902] nouveau [ DRM] Bios version 62.79.4e.00
[ 8.088969] nouveau [ DRM] TMDS table version 2.0
[ 8.089030] nouveau [ DRM] DCB version 4.0
[ 8.089096] nouveau [ DRM] DCB outp 00: 02021286 0f220010
[ 8.089157] nouveau [ DRM] DCB outp 01: 01000122 00000010
[ 8.089222] nouveau [ DRM] DCB outp 02: 01000120 0000001e
[ 8.089283] nouveau [ DRM] DCB outp 03: 02021232 00000010
[ 8.089349] nouveau [ DRM] DCB conn 00: 00001020
[ 8.089459] nouveau [ DRM] DCB conn 01: 0000a146
[ 8.089565] nouveau [ DRM] DCB conn 02: 00005246
[ 8.099341] nouveau W[ DRM] unknown connector type 20
[ 8.100025] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.100090] [drm] No driver support for vblank timestamp query.
[ 8.300673] nouveau [ DRM] 4 available performance level(s)
[ 8.300759] nouveau [ DRM] 0: core 150MHz shader 300MHz voltage 900mV fanspeed 100%
[ 8.300839] nouveau [ DRM] 1: core 150MHz shader 300MHz voltage 900mV fanspeed 100%
[ 8.300921] nouveau [ DRM] 2: core 350MHz shader 800MHz voltage 900mV fanspeed 100%
[ 8.301001] nouveau [ DRM] 3: core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
[ 8.301080] nouveau [ DRM] c:
[ 8.325812] nouveau [ DRM] MM: using M2MF for buffer copies
Cheers,
Thomas
next prev parent reply other threads:[~2013-12-06 13:30 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 7:44 Regression: drm/nouveau/clk: implement power state and engine clock control in core (7c856522069755ab9d163a24ac332cd3cb35fe30) breaks GeForce 9400 on Intel Mac Mini Model November 2010 model Thomas Glanzmann
2013-12-06 11:45 ` Ilia Mirkin
2013-12-06 13:30 ` Thomas Glanzmann [this message]
2013-12-06 13:38 ` Ilia Mirkin
2013-12-06 14:13 ` Thomas Glanzmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131206133015.GA27211@glanzmann.de \
--to=thomas@glanzmann.de \
--cc=bskeggs@redhat.com \
--cc=imirkin@alum.mit.edu \
--cc=linux-kernel@vger.kernel.org \
--cc=nouveau@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox