* [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs.
@ 2013-12-07 4:33 Gary Rookard
2013-12-07 7:59 ` Dan Carpenter
0 siblings, 1 reply; 2+ messages in thread
From: Gary Rookard @ 2013-12-07 4:33 UTC (permalink / raw)
To: gregkh; +Cc: lisa, devel, linux-kernel, Gary Rookard
This is the first patch of a series.
Signed:off-by: Gary Alan Rookard <garyrookard@gmail.com>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 398 +++++++++++++++++++++---------------------
1 file changed, 199 insertions(+), 199 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 9f7e30f..f550567 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -8,242 +8,242 @@
//DDR INIT-133Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007212},
+ {0x0f000820,0x07F13FFF},
+ {0x0f000810,0x00000F95},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a04C,0x0000000C},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x081b0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003};
+ {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x081b0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000010},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//80Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07f1ffff},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a000,0x00000016},
- {0x0F00a04C,0x0000000C},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07f1ffff},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a000,0x00000016},
+ {0x0F00a04C,0x0000000C},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01000000},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},
- {0x0F007020,0x04020107},
- {0x0F007024,0x00000007},
- {0x0F007028,0x02020201},
- {0x0F00702c,0x0204040a},
- {0x0F007030,0x04000000},
- {0x0F007034,0x00000002},
- {0x0F007038,0x1F060200},
- {0x0F00703C,0x1C22221F},
- {0x0F007040,0x8A006600},
- {0x0F007044,0x221a0800},
- {0x0F007048,0x02690204},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x000A15D6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00004000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007094,0x00000104},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01000000},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020000},
+ {0x0F007020,0x04020107},
+ {0x0F007024,0x00000007},
+ {0x0F007028,0x02020201},
+ {0x0F00702c,0x0204040a},
+ {0x0F007030,0x04000000},
+ {0x0F007034,0x00000002},
+ {0x0F007038,0x1F060200},
+ {0x0F00703C,0x1C22221F},
+ {0x0F007040,0x8A006600},
+ {0x0F007044,0x221a0800},
+ {0x0F007048,0x02690204},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x000A15D6},
+ {0x0F007064,0x0000000A},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00004000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//100Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007008},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13E3F},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007008},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07F13E3F},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
//0x0f000840,0x0FFF1800,
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a04C,0x0000000C},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020201},
- {0x0F00702c,0x0204040A},
- {0x0F007030,0x06000000},
- {0x0F007034,0x00000004},
- {0x0F007038,0x20080200},
- {0x0F00703C,0x02030320},
- {0x0F007040,0x6E7F1200},
- {0x0F007044,0x01190A00},
- {0x0F007048,0x06120305},//0x02690204 // 0x06120305
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001C},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
+ {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x00000007},
+ {0x0F007028,0x01020201},
+ {0x0F00702c,0x0204040A},
+ {0x0F007030,0x06000000},
+ {0x0F007034,0x00000004},
+ {0x0F007038,0x20080200},
+ {0x0F00703C,0x02030320},
+ {0x0F007040,0x6E7F1200},
+ {0x0F007044,0x01190A00},
+ {0x0F007048,0x06120305},//0x02690204 // 0x06120305
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001C},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x00082ED6},
+ {0x0F007064,0x0000000A},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00005000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//Net T3B DDR Settings
//DDR INIT-133Mhz
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007212},
+ {0x0f000820,0x07F13FFF},
+ {0x0f000810,0x00000F95},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002}
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002}
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13652},
- {0x0f000840,0x0FFF0800},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07F13652},
+ {0x0f000840,0x0FFF0800},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
+ {0x0f000860,0x00000000},
// Changed source for X-bar and MIPS clock to APLL
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x040D0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000012},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003},
+ {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x040D0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000012},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000},
+ {0x0F007018,0x01010000},
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
--
1.8.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs.
2013-12-07 4:33 [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs Gary Rookard
@ 2013-12-07 7:59 ` Dan Carpenter
0 siblings, 0 replies; 2+ messages in thread
From: Dan Carpenter @ 2013-12-07 7:59 UTC (permalink / raw)
To: Gary Rookard; +Cc: gregkh, devel, lisa, linux-kernel
This breaks the build... :(
regards,
dan carpenter
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-12-07 8:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-07 4:33 [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs Gary Rookard
2013-12-07 7:59 ` Dan Carpenter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox