* [GIT PULL RESEND] clocksource/clockevents fixes for 3.13
@ 2013-12-10 13:28 Daniel Lezcano
2013-12-10 13:41 ` Ingo Molnar
0 siblings, 1 reply; 4+ messages in thread
From: Daniel Lezcano @ 2013-12-10 13:28 UTC (permalink / raw)
To: Thomas Gleixner, Ingo Molnar
Cc: Axel Lin, Dinh Nguyen, Ezequiel Garcia, Marc Zyngier,
Thierry Reding, Linux Kernel Mailing List
Hi Thomas, Ingo,
here are the fixes for 3.13 based on timers/urgent
* Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig
for the time-efm32.
* Dinh Nguyen fixed read_sched_clock to return the right value for the
dw_apb_timer.
* Ezequiel Garcia registered the sched clock after the counter, thus
preventing time jump in the traces for the armada-370-xp.
* Marc Zyngier stopped the timer before enabling the irq in order to
prevent it to be fired before the clockevent is registered for the sunxi.
* Thierry Reding removed a of_node_put in clksrc-of because the
reference is not held.
Thanks
-- Daniel
----------------------------------------------------------------
The following changes since commit 0e576acbc1d9600cf2d9b4a141a2554639959d50:
nohz: Fix another inconsistency between CONFIG_NO_HZ=n and nohz=off
(2013-11-29 12:23:03 +0100)
are available in the git repository at:
git://git.linaro.org/people/daniel.lezcano/linux.git clockevents/fixes
for you to fetch changes up to d28420aabbe4a7792c9ef4f5c4bd6e776414583f:
clocksource: sunxi: Stop timer from ticking before enabling
interrupts (2013-12-10 13:56:43 +0100)
----------------------------------------------------------------
Axel Lin (1):
clocksource: time-efm32: Select CLKSRC_MMIO
Dinh Nguyen (2):
clocksource: dw_apb_timer: Move timer defines to header file.
clocksource: dw_apb_timer_of: Fix read_sched_clock
Ezequiel Garcia (1):
clocksource: armada-370-xp: Register sched_clock after the
counter res
Marc Zyngier (1):
clocksource: sunxi: Stop timer from ticking before enabling
interrupts
Thierry Reding (1):
clocksource: clksrc-of: Do not drop unheld reference on device node
drivers/clocksource/Kconfig | 1 +
drivers/clocksource/clksrc-of.c | 1 -
drivers/clocksource/dw_apb_timer.c | 19 -------------------
drivers/clocksource/dw_apb_timer_of.c | 9 +++++----
drivers/clocksource/sun4i_timer.c | 3 +++
drivers/clocksource/time-armada-370-xp.c | 10 +++++-----
include/linux/dw_apb_timer.h | 19 +++++++++++++++++++
7 files changed, 33 insertions(+), 29 deletions(-)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 5c07a56..634c4d6 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -75,6 +75,7 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
config CLKSRC_EFM32
bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
+ select CLKSRC_MMIO
default ARCH_EFM32
help
Support to use the timers of EFM32 SoCs as clock source and clock
diff --git a/drivers/clocksource/clksrc-of.c
b/drivers/clocksource/clksrc-of.c
index 35639cf4..b9ddd9e 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -35,6 +35,5 @@ void __init clocksource_of_init(void)
init_func = match->data;
init_func(np);
- of_node_put(np);
}
}
diff --git a/drivers/clocksource/dw_apb_timer.c
b/drivers/clocksource/dw_apb_timer.c
index e54ca10..c3a8f52 100644
--- a/drivers/clocksource/dw_apb_timer.c
+++ b/drivers/clocksource/dw_apb_timer.c
@@ -18,25 +18,6 @@
#include <linux/io.h>
#include <linux/slab.h>
-#define APBT_MIN_PERIOD 4
-#define APBT_MIN_DELTA_USEC 200
-
-#define APBTMR_N_LOAD_COUNT 0x00
-#define APBTMR_N_CURRENT_VALUE 0x04
-#define APBTMR_N_CONTROL 0x08
-#define APBTMR_N_EOI 0x0c
-#define APBTMR_N_INT_STATUS 0x10
-
-#define APBTMRS_INT_STATUS 0xa0
-#define APBTMRS_EOI 0xa4
-#define APBTMRS_RAW_INT_STATUS 0xa8
-#define APBTMRS_COMP_VERSION 0xac
-
-#define APBTMR_CONTROL_ENABLE (1 << 0)
-/* 1: periodic, 0:free running. */
-#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
-#define APBTMR_CONTROL_INT (1 << 2)
-
static inline struct dw_apb_clock_event_device *
ced_to_dw_apb_ced(struct clock_event_device *evt)
{
diff --git a/drivers/clocksource/dw_apb_timer_of.c
b/drivers/clocksource/dw_apb_timer_of.c
index 45ba8ae..c3fe17e 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -102,18 +102,17 @@ static void __init add_clocksource(struct
device_node *source_timer)
* timer is found. sched_io_base then points to the current_value
* register of the clocksource timer.
*/
- sched_io_base = iobase + 0x04;
+ sched_io_base = iobase;
sched_rate = rate;
}
static u64 read_sched_clock(void)
{
- return __raw_readl(sched_io_base);
+ return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
}
static const struct of_device_id sptimer_ids[] __initconst = {
{ .compatible = "picochip,pc3x2-rtc" },
- { .compatible = "snps,dw-apb-timer-sp" },
{ /* Sentinel */ },
};
@@ -151,4 +150,6 @@ static void __init dw_apb_timer_init(struct
device_node *timer)
num_called++;
}
CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer",
dw_apb_timer_init);
-CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc",
dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer_osc, "snps,dw-apb-timer-osc",
dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer_sp, "snps,dw-apb-timer-sp",
dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer", dw_apb_timer_init);
diff --git a/drivers/clocksource/sun4i_timer.c
b/drivers/clocksource/sun4i_timer.c
index 2fb4695..a4f6119 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -179,6 +179,9 @@ static void __init sun4i_timer_init(struct
device_node *node)
writel(TIMER_CTL_CLK_SRC(TIMER_CTL_CLK_SRC_OSC24M),
timer_base + TIMER_CTL_REG(0));
+ /* Make sure timer is stopped before playing with interrupts */
+ sun4i_clkevt_time_stop(0);
+
ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
pr_warn("failed to setup irq %d\n", irq);
diff --git a/drivers/clocksource/time-armada-370-xp.c
b/drivers/clocksource/time-armada-370-xp.c
index d8e47e5..4e7f680 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -256,11 +256,6 @@ static void __init
armada_370_xp_timer_common_init(struct device_node *np)
ticks_per_jiffy = (timer_clk + HZ / 2) / HZ;
/*
- * Set scale and timer for sched_clock.
- */
- sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
-
- /*
* Setup free-running clocksource timer (interrupts
* disabled).
*/
@@ -270,6 +265,11 @@ static void __init
armada_370_xp_timer_common_init(struct device_node *np)
timer_ctrl_clrset(0, TIMER0_EN | TIMER0_RELOAD_EN |
TIMER0_DIV(TIMER_DIVIDER_SHIFT));
+ /*
+ * Set scale and timer for sched_clock.
+ */
+ sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
+
clocksource_mmio_init(timer_base + TIMER0_VAL_OFF,
"armada_370_xp_clocksource",
timer_clk, 300, 32, clocksource_mmio_readl_down);
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 1f79b20..1d2b949 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -19,6 +19,25 @@
#define APBTMRS_REG_SIZE 0x14
+#define APBT_MIN_PERIOD 4
+#define APBT_MIN_DELTA_USEC 200
+
+#define APBTMR_N_LOAD_COUNT 0x00
+#define APBTMR_N_CURRENT_VALUE 0x04
+#define APBTMR_N_CONTROL 0x08
+#define APBTMR_N_EOI 0x0c
+#define APBTMR_N_INT_STATUS 0x10
+
+#define APBTMRS_INT_STATUS 0xa0
+#define APBTMRS_EOI 0xa4
+#define APBTMRS_RAW_INT_STATUS 0xa8
+#define APBTMRS_COMP_VERSION 0xac
+
+#define APBTMR_CONTROL_ENABLE (1 << 0)
+/* 1: periodic, 0:free running. */
+#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
+#define APBTMR_CONTROL_INT (1 << 2)
+
struct dw_apb_timer {
void __iomem *base;
unsigned long freq;
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [GIT PULL RESEND] clocksource/clockevents fixes for 3.13
2013-12-10 13:28 [GIT PULL RESEND] clocksource/clockevents fixes for 3.13 Daniel Lezcano
@ 2013-12-10 13:41 ` Ingo Molnar
2013-12-10 14:21 ` Dinh Nguyen
0 siblings, 1 reply; 4+ messages in thread
From: Ingo Molnar @ 2013-12-10 13:41 UTC (permalink / raw)
To: Daniel Lezcano
Cc: Thomas Gleixner, Axel Lin, Dinh Nguyen, Ezequiel Garcia,
Marc Zyngier, Thierry Reding, Linux Kernel Mailing List
* Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
> Hi Thomas, Ingo,
>
> here are the fixes for 3.13 based on timers/urgent
>
> * Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig
> for the time-efm32.
>
> * Dinh Nguyen fixed read_sched_clock to return the right value for
> the dw_apb_timer.
>
> * Ezequiel Garcia registered the sched clock after the counter,
> thus preventing time jump in the traces for the armada-370-xp.
>
> * Marc Zyngier stopped the timer before enabling the irq in order
> to prevent it to be fired before the clockevent is registered for
> the sunxi.
>
> * Thierry Reding removed a of_node_put in clksrc-of because the
> reference is not held.
(For future reference, please post all patches not just a combo
patch.)
> Dinh Nguyen (2):
> clocksource: dw_apb_timer: Move timer defines to header file.
> clocksource: dw_apb_timer_of: Fix read_sched_clock
Nit: we generally don't use periods at the end of titles, it looks
inconsistent in shortlogs.
> diff --git a/drivers/clocksource/dw_apb_timer.c
> b/drivers/clocksource/dw_apb_timer.c
> index e54ca10..c3a8f52 100644
> --- a/drivers/clocksource/dw_apb_timer.c
> +++ b/drivers/clocksource/dw_apb_timer.c
> @@ -18,25 +18,6 @@
> #include <linux/io.h>
> #include <linux/slab.h>
>
> -#define APBT_MIN_PERIOD 4
> -#define APBT_MIN_DELTA_USEC 200
> -
> -#define APBTMR_N_LOAD_COUNT 0x00
> -#define APBTMR_N_CURRENT_VALUE 0x04
> -#define APBTMR_N_CONTROL 0x08
> -#define APBTMR_N_EOI 0x0c
> -#define APBTMR_N_INT_STATUS 0x10
> -
> -#define APBTMRS_INT_STATUS 0xa0
> -#define APBTMRS_EOI 0xa4
> -#define APBTMRS_RAW_INT_STATUS 0xa8
> -#define APBTMRS_COMP_VERSION 0xac
> -
> -#define APBTMR_CONTROL_ENABLE (1 << 0)
> -/* 1: periodic, 0:free running. */
> -#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
> -#define APBTMR_CONTROL_INT (1 << 2)
> -
> static inline struct dw_apb_clock_event_device *
> ced_to_dw_apb_ced(struct clock_event_device *evt)
> {
> diff --git a/drivers/clocksource/dw_apb_timer_of.c
> b/drivers/clocksource/dw_apb_timer_of.c
> index 45ba8ae..c3fe17e 100644
> --- a/drivers/clocksource/dw_apb_timer_of.c
> +++ b/drivers/clocksource/dw_apb_timer_of.c
> @@ -102,18 +102,17 @@ static void __init add_clocksource(struct
> device_node *source_timer)
> * timer is found. sched_io_base then points to the current_value
> * register of the clocksource timer.
> */
> - sched_io_base = iobase + 0x04;
> + sched_io_base = iobase;
> sched_rate = rate;
> }
>
> static u64 read_sched_clock(void)
> {
> - return __raw_readl(sched_io_base);
> + return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
AFAICS the minimal fix here for v3.13 would be to just do:
> - return __raw_readl(sched_io_base);
> + return ~__raw_readl(sched_io_base);
Right? That way the fix is just a oneliner and we could delay the
header file and magic-constants use cleanups to v3.14.
Thanks,
Ingo
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL RESEND] clocksource/clockevents fixes for 3.13
2013-12-10 13:41 ` Ingo Molnar
@ 2013-12-10 14:21 ` Dinh Nguyen
2013-12-10 14:31 ` Daniel Lezcano
0 siblings, 1 reply; 4+ messages in thread
From: Dinh Nguyen @ 2013-12-10 14:21 UTC (permalink / raw)
To: Ingo Molnar
Cc: Daniel Lezcano, Thomas Gleixner, Axel Lin, Ezequiel Garcia,
Marc Zyngier, Thierry Reding, Linux Kernel Mailing List
On Tue, 2013-12-10 at 14:41 +0100, Ingo Molnar wrote:
> * Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>
> >
> > Hi Thomas, Ingo,
> >
> > here are the fixes for 3.13 based on timers/urgent
> >
> > * Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig
> > for the time-efm32.
> >
> > * Dinh Nguyen fixed read_sched_clock to return the right value for
> > the dw_apb_timer.
> >
> > * Ezequiel Garcia registered the sched clock after the counter,
> > thus preventing time jump in the traces for the armada-370-xp.
> >
> > * Marc Zyngier stopped the timer before enabling the irq in order
> > to prevent it to be fired before the clockevent is registered for
> > the sunxi.
> >
> > * Thierry Reding removed a of_node_put in clksrc-of because the
> > reference is not held.
>
> (For future reference, please post all patches not just a combo
> patch.)
>
> > Dinh Nguyen (2):
> > clocksource: dw_apb_timer: Move timer defines to header file.
> > clocksource: dw_apb_timer_of: Fix read_sched_clock
>
> Nit: we generally don't use periods at the end of titles, it looks
> inconsistent in shortlogs.
>
> > diff --git a/drivers/clocksource/dw_apb_timer.c
> > b/drivers/clocksource/dw_apb_timer.c
> > index e54ca10..c3a8f52 100644
> > --- a/drivers/clocksource/dw_apb_timer.c
> > +++ b/drivers/clocksource/dw_apb_timer.c
> > @@ -18,25 +18,6 @@
> > #include <linux/io.h>
> > #include <linux/slab.h>
> >
> > -#define APBT_MIN_PERIOD 4
> > -#define APBT_MIN_DELTA_USEC 200
> > -
> > -#define APBTMR_N_LOAD_COUNT 0x00
> > -#define APBTMR_N_CURRENT_VALUE 0x04
> > -#define APBTMR_N_CONTROL 0x08
> > -#define APBTMR_N_EOI 0x0c
> > -#define APBTMR_N_INT_STATUS 0x10
> > -
> > -#define APBTMRS_INT_STATUS 0xa0
> > -#define APBTMRS_EOI 0xa4
> > -#define APBTMRS_RAW_INT_STATUS 0xa8
> > -#define APBTMRS_COMP_VERSION 0xac
> > -
> > -#define APBTMR_CONTROL_ENABLE (1 << 0)
> > -/* 1: periodic, 0:free running. */
> > -#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
> > -#define APBTMR_CONTROL_INT (1 << 2)
> > -
> > static inline struct dw_apb_clock_event_device *
> > ced_to_dw_apb_ced(struct clock_event_device *evt)
> > {
> > diff --git a/drivers/clocksource/dw_apb_timer_of.c
> > b/drivers/clocksource/dw_apb_timer_of.c
> > index 45ba8ae..c3fe17e 100644
> > --- a/drivers/clocksource/dw_apb_timer_of.c
> > +++ b/drivers/clocksource/dw_apb_timer_of.c
> > @@ -102,18 +102,17 @@ static void __init add_clocksource(struct
> > device_node *source_timer)
> > * timer is found. sched_io_base then points to the current_value
> > * register of the clocksource timer.
> > */
> > - sched_io_base = iobase + 0x04;
> > + sched_io_base = iobase;
> > sched_rate = rate;
> > }
> >
> > static u64 read_sched_clock(void)
> > {
> > - return __raw_readl(sched_io_base);
> > + return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
>
> AFAICS the minimal fix here for v3.13 would be to just do:
>
> > - return __raw_readl(sched_io_base);
> > + return ~__raw_readl(sched_io_base);
>
> Right? That way the fix is just a oneliner and we could delay the
> header file and magic-constants use cleanups to v3.14.
Yes. That will be fine. Do you need me to send a new patch that does
just that?
Thanks,
Dinh
>
> Thanks,
>
> Ingo
>
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [GIT PULL RESEND] clocksource/clockevents fixes for 3.13
2013-12-10 14:21 ` Dinh Nguyen
@ 2013-12-10 14:31 ` Daniel Lezcano
0 siblings, 0 replies; 4+ messages in thread
From: Daniel Lezcano @ 2013-12-10 14:31 UTC (permalink / raw)
To: Dinh Nguyen, Ingo Molnar
Cc: Thomas Gleixner, Axel Lin, Ezequiel Garcia, Marc Zyngier,
Thierry Reding, Linux Kernel Mailing List
On 12/10/2013 03:21 PM, Dinh Nguyen wrote:
> On Tue, 2013-12-10 at 14:41 +0100, Ingo Molnar wrote:
>> * Daniel Lezcano <daniel.lezcano@linaro.org> wrote:
>>
>>>
>>> Hi Thomas, Ingo,
>>>
>>> here are the fixes for 3.13 based on timers/urgent
>>>
>>> * Axel Lin added a missing dependency on CLKSRC_MMIO in the Kconfig
>>> for the time-efm32.
>>>
>>> * Dinh Nguyen fixed read_sched_clock to return the right value for
>>> the dw_apb_timer.
>>>
>>> * Ezequiel Garcia registered the sched clock after the counter,
>>> thus preventing time jump in the traces for the armada-370-xp.
>>>
>>> * Marc Zyngier stopped the timer before enabling the irq in order
>>> to prevent it to be fired before the clockevent is registered for
>>> the sunxi.
>>>
>>> * Thierry Reding removed a of_node_put in clksrc-of because the
>>> reference is not held.
>>
>> (For future reference, please post all patches not just a combo
>> patch.)
>>
>>> Dinh Nguyen (2):
>>> clocksource: dw_apb_timer: Move timer defines to header file.
>>> clocksource: dw_apb_timer_of: Fix read_sched_clock
>>
>> Nit: we generally don't use periods at the end of titles, it looks
>> inconsistent in shortlogs.
>>
>>> diff --git a/drivers/clocksource/dw_apb_timer.c
>>> b/drivers/clocksource/dw_apb_timer.c
>>> index e54ca10..c3a8f52 100644
>>> --- a/drivers/clocksource/dw_apb_timer.c
>>> +++ b/drivers/clocksource/dw_apb_timer.c
>>> @@ -18,25 +18,6 @@
>>> #include <linux/io.h>
>>> #include <linux/slab.h>
>>>
>>> -#define APBT_MIN_PERIOD 4
>>> -#define APBT_MIN_DELTA_USEC 200
>>> -
>>> -#define APBTMR_N_LOAD_COUNT 0x00
>>> -#define APBTMR_N_CURRENT_VALUE 0x04
>>> -#define APBTMR_N_CONTROL 0x08
>>> -#define APBTMR_N_EOI 0x0c
>>> -#define APBTMR_N_INT_STATUS 0x10
>>> -
>>> -#define APBTMRS_INT_STATUS 0xa0
>>> -#define APBTMRS_EOI 0xa4
>>> -#define APBTMRS_RAW_INT_STATUS 0xa8
>>> -#define APBTMRS_COMP_VERSION 0xac
>>> -
>>> -#define APBTMR_CONTROL_ENABLE (1 << 0)
>>> -/* 1: periodic, 0:free running. */
>>> -#define APBTMR_CONTROL_MODE_PERIODIC (1 << 1)
>>> -#define APBTMR_CONTROL_INT (1 << 2)
>>> -
>>> static inline struct dw_apb_clock_event_device *
>>> ced_to_dw_apb_ced(struct clock_event_device *evt)
>>> {
>>> diff --git a/drivers/clocksource/dw_apb_timer_of.c
>>> b/drivers/clocksource/dw_apb_timer_of.c
>>> index 45ba8ae..c3fe17e 100644
>>> --- a/drivers/clocksource/dw_apb_timer_of.c
>>> +++ b/drivers/clocksource/dw_apb_timer_of.c
>>> @@ -102,18 +102,17 @@ static void __init add_clocksource(struct
>>> device_node *source_timer)
>>> * timer is found. sched_io_base then points to the current_value
>>> * register of the clocksource timer.
>>> */
>>> - sched_io_base = iobase + 0x04;
>>> + sched_io_base = iobase;
>>> sched_rate = rate;
>>> }
>>>
>>> static u64 read_sched_clock(void)
>>> {
>>> - return __raw_readl(sched_io_base);
>>> + return ~__raw_readl(sched_io_base + APBTMR_N_CURRENT_VALUE);
>>
>> AFAICS the minimal fix here for v3.13 would be to just do:
>>
>>> - return __raw_readl(sched_io_base);
>>> + return ~__raw_readl(sched_io_base);
>>
>> Right? That way the fix is just a oneliner and we could delay the
>> header file and magic-constants use cleanups to v3.14.
>
> Yes. That will be fine. Do you need me to send a new patch that does
> just that?
Yes, please.
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-12-10 14:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-12-10 13:28 [GIT PULL RESEND] clocksource/clockevents fixes for 3.13 Daniel Lezcano
2013-12-10 13:41 ` Ingo Molnar
2013-12-10 14:21 ` Dinh Nguyen
2013-12-10 14:31 ` Daniel Lezcano
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox