[PATCH 2/2] USB: gadget: s3c-hsotg: add flush TX FIFO when kill all requests

Robert Baldyga
2013-12-06T12:04:11Z

This patch adds flushing TX FIFO in kill_all_requests() function in
dedicated-fifo mode. It's because when requests are killed (when endpoint is
disabled or in case of device reset/disconnection) in FIFO can stay some
unsent data. In the worst case FIFO can stay full, and then if endpoint will
be back enabled, sending new data will be impossible.

Signed-off-by: Robert Baldyga <r.baldyga@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

---
drivers/usb/gadget/s3c-hsotg.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ad9a4ed..4a085e6 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2156,6 +2156,9 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
s3c_hsotg_complete_request(hsotg, ep, req,
result);
}
+ if(hsotg->dedicated_fifos)
+ if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072)
+ s3c_hsotg_txfifo_flush(hsotg, ep->index);
}

#define call_gadget(_hs, _entry) \
--
1.7.9.5