From: Jiri Olsa <jolsa@redhat.com>
To: Steven Rostedt <rostedt@goodmis.org>
Cc: linux-kernel@vger.kernel.org,
Corey Ashford <cjashfor@linux.vnet.ibm.com>,
Frederic Weisbecker <fweisbec@gmail.com>,
Ingo Molnar <mingo@elte.hu>, Namhyung Kim <namhyung@kernel.org>,
Paul Mackerras <paulus@samba.org>,
Peter Zijlstra <a.p.zijlstra@chello.nl>,
Arnaldo Carvalho de Melo <acme@ghostprotocols.net>,
David Ahern <dsahern@gmail.com>
Subject: [PATCHv2 1/2] tools lib traceevent: Replace tabs with spaces for all non-commands statements
Date: Thu, 2 Jan 2014 10:53:04 +0100 [thread overview]
Message-ID: <20140102095304.GA1196@krava.brq.redhat.com> (raw)
In-Reply-To: <1388602784.10966.4.camel@pippen.local.home>
On Wed, Jan 01, 2014 at 01:59:44PM -0500, Steven Rostedt wrote:
> On Wed, 2014-01-01 at 17:50 +0100, Jiri Olsa wrote:
> > Replacing tabs with spaces for all non-commands statements
> > in 'Makefile'.
> >
>
> Instead of just stating what you did, can you also include a "why" you
> did it?
sry about that.. attached v2 with updated changelog
it was already discussed before in here:
http://marc.info/?t=136484403900003&r=1&w=2
thanks,
jirka
---
The tabbed indentation in non-commands statements could
be sometimes considered as follow up for the rule command
in the Makefile.
This error is hard to find, so as a precaution replacing
tabs with spaces for all non-commands statements.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
---
tools/lib/traceevent/Makefile | 54 +++++++++++++++++++++----------------------
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/tools/lib/traceevent/Makefile b/tools/lib/traceevent/Makefile
index ca4ab78..76fe0ae 100644
--- a/tools/lib/traceevent/Makefile
+++ b/tools/lib/traceevent/Makefile
@@ -86,8 +86,8 @@ ifeq ($(BUILD_SRC),)
ifneq ($(OUTPUT),)
define build_output
- $(if $(VERBOSE:1=),@)+$(MAKE) -C $(OUTPUT) \
- BUILD_SRC=$(CURDIR)/ -f $(CURDIR)/Makefile $1
+ $(if $(VERBOSE:1=),@)+$(MAKE) -C $(OUTPUT) \
+ BUILD_SRC=$(CURDIR)/ -f $(CURDIR)/Makefile $1
endef
all: sub-make
@@ -221,23 +221,23 @@ $(PLUGINS): %.so: %.o
$(QUIET_LINK)$(CC) $(CFLAGS) -shared -nostartfiles -o $@ $<
define make_version.h
- (echo '/* This file is automatically generated. Do not modify. */'; \
- echo \#define VERSION_CODE $(shell \
- expr $(VERSION) \* 256 + $(PATCHLEVEL)); \
- echo '#define EXTRAVERSION ' $(EXTRAVERSION); \
- echo '#define VERSION_STRING "'$(VERSION).$(PATCHLEVEL).$(EXTRAVERSION)'"'; \
- echo '#define FILE_VERSION '$(FILE_VERSION); \
- ) > $1
+ (echo '/* This file is automatically generated. Do not modify. */'; \
+ echo \#define VERSION_CODE $(shell \
+ expr $(VERSION) \* 256 + $(PATCHLEVEL)); \
+ echo '#define EXTRAVERSION ' $(EXTRAVERSION); \
+ echo '#define VERSION_STRING "'$(VERSION).$(PATCHLEVEL).$(EXTRAVERSION)'"'; \
+ echo '#define FILE_VERSION '$(FILE_VERSION); \
+ ) > $1
endef
define update_version.h
- ($(call make_version.h, $@.tmp); \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPDATE $@'; \
- mv -f $@.tmp $@; \
- fi);
+ ($(call make_version.h, $@.tmp); \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ echo ' UPDATE $@'; \
+ mv -f $@.tmp $@; \
+ fi);
endef
ep_version.h: force
@@ -246,13 +246,13 @@ ep_version.h: force
VERSION_FILES = ep_version.h
define update_dir
- (echo $1 > $@.tmp; \
- if [ -r $@ ] && cmp -s $@ $@.tmp; then \
- rm -f $@.tmp; \
- else \
- echo ' UPDATE $@'; \
- mv -f $@.tmp $@; \
- fi);
+ (echo $1 > $@.tmp; \
+ if [ -r $@ ] && cmp -s $@ $@.tmp; then \
+ rm -f $@.tmp; \
+ else \
+ echo ' UPDATE $@'; \
+ mv -f $@.tmp $@; \
+ fi);
endef
## make deps
@@ -262,10 +262,10 @@ all_deps := $(all_objs:%.o=.%.d)
# let .d file also depends on the source and header files
define check_deps
- @set -e; $(RM) $@; \
- $(CC) -MM $(CFLAGS) $< > $@.$$$$; \
- sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
- $(RM) $@.$$$$
+ @set -e; $(RM) $@; \
+ $(CC) -MM $(CFLAGS) $< > $@.$$$$; \
+ sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
+ $(RM) $@.$$$$
endef
$(all_deps): .%.d: $(src)/%.c
--
1.8.3.1
next prev parent reply other threads:[~2014-01-02 9:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-01 16:50 [PATCH 1/2] tools lib traceevent: Replace tabs with spaces for all non-commands statements Jiri Olsa
2014-01-01 16:50 ` [PATCH 2/2] tools lib traceevent: Shut up plugins make message Jiri Olsa
2014-01-14 16:38 ` [tip:perf/core] " tip-bot for Jiri Olsa
2014-01-01 18:59 ` [PATCH 1/2] tools lib traceevent: Replace tabs with spaces for all non-commands statements Steven Rostedt
2014-01-02 9:53 ` Jiri Olsa [this message]
2014-01-14 16:38 ` [tip:perf/core] " tip-bot for Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140102095304.GA1196@krava.brq.redhat.com \
--to=jolsa@redhat.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@ghostprotocols.net \
--cc=cjashfor@linux.vnet.ibm.com \
--cc=dsahern@gmail.com \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=namhyung@kernel.org \
--cc=paulus@samba.org \
--cc=rostedt@goodmis.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox