From: David Fries <David@Fries.net>
To: linux-kernel@vger.kernel.org
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Subject: [PATCH 16/16] hold bus_mutex in netlink and search
Date: Tue, 14 Jan 2014 22:52:00 -0600 [thread overview]
Message-ID: <20140115045200.GA29560@spacedout.fries.net> (raw)
In-Reply-To: <1388299556-12669-1-git-send-email-David@Fries.net>
The bus_mutex needs to be taken to serialize access to a specific bus.
netlink wasn't updated when bus_mutex was added and was calling
without that lock held, and not all of the masters were holding the
bus_mutex in a search. This was causing the ds2490 hardware to stop
responding when both netlink and /sys slaves were executing bus
commands at the same time.
Signed-off-by: David Fries <David@Fries.net>
---
This fixes existing bugs, tacking it to the end of the previous patch
series.
drivers/w1/masters/ds1wm.c | 4 +++-
drivers/w1/masters/ds2490.c | 8 ++++++--
drivers/w1/w1_netlink.c | 13 +++++++++++--
3 files changed, 20 insertions(+), 5 deletions(-)
diff --git a/drivers/w1/masters/ds1wm.c b/drivers/w1/masters/ds1wm.c
index 02df3b1..b077b8b 100644
--- a/drivers/w1/masters/ds1wm.c
+++ b/drivers/w1/masters/ds1wm.c
@@ -326,13 +326,14 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
unsigned slaves_found = 0;
unsigned int pass = 0;
+ mutex_lock(&master_dev->bus_mutex);
dev_dbg(&ds1wm_data->pdev->dev, "search begin\n");
while (true) {
++pass;
if (pass > 100) {
dev_dbg(&ds1wm_data->pdev->dev,
"too many attempts (100), search aborted\n");
- return;
+ break;
}
mutex_lock(&master_dev->bus_mutex);
@@ -439,6 +440,7 @@ static void ds1wm_search(void *data, struct w1_master *master_dev,
dev_dbg(&ds1wm_data->pdev->dev,
"pass: %d total: %d search done ms d bit pos: %d\n", pass,
slaves_found, ms_discrep_bit);
+ mutex_unlock(&master_dev->bus_mutex);
}
/* --------------------------------------------------------------------- */
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index db0bf32..7404ad30 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -727,9 +727,11 @@ static void ds9490r_search(void *data, struct w1_master *master,
*/
u64 buf[2*64/8];
+ mutex_lock(&master->bus_mutex);
+
/* address to start searching at */
if (ds_send_data(dev, (u8 *)&master->search_id, 8) < 0)
- return;
+ goto search_out;
master->search_id = 0;
value = COMM_SEARCH_ACCESS | COMM_IM | COMM_RST | COMM_SM | COMM_F |
@@ -739,7 +741,7 @@ static void ds9490r_search(void *data, struct w1_master *master,
search_limit = 0;
index = search_type | (search_limit << 8);
if (ds_send_control(dev, value, index) < 0)
- return;
+ goto search_out;
do {
schedule_timeout(jtime);
@@ -791,6 +793,8 @@ static void ds9490r_search(void *data, struct w1_master *master,
master->max_slave_count);
set_bit(W1_WARN_MAX_COUNT, &master->flags);
}
+search_out:
+ mutex_unlock(&master->bus_mutex);
}
#if 0
diff --git a/drivers/w1/w1_netlink.c b/drivers/w1/w1_netlink.c
index a5dc219..5234964 100644
--- a/drivers/w1/w1_netlink.c
+++ b/drivers/w1/w1_netlink.c
@@ -246,11 +246,16 @@ static int w1_process_command_master(struct w1_master *dev,
{
int err = -EINVAL;
+ /* drop bus_mutex for search (does it's own locking), and add/remove
+ * which doesn't use the bus
+ */
switch (req_cmd->cmd) {
case W1_CMD_SEARCH:
case W1_CMD_ALARM_SEARCH:
case W1_CMD_LIST_SLAVES:
+ mutex_unlock(&dev->bus_mutex);
err = w1_get_slaves(dev, req_msg, req_hdr, req_cmd);
+ mutex_lock(&dev->bus_mutex);
break;
case W1_CMD_READ:
case W1_CMD_WRITE:
@@ -262,8 +267,12 @@ static int w1_process_command_master(struct w1_master *dev,
break;
case W1_CMD_SLAVE_ADD:
case W1_CMD_SLAVE_REMOVE:
+ mutex_unlock(&dev->bus_mutex);
+ mutex_lock(&dev->mutex);
err = w1_process_command_addremove(dev, req_msg, req_hdr,
req_cmd);
+ mutex_unlock(&dev->mutex);
+ mutex_lock(&dev->bus_mutex);
break;
default:
err = -EINVAL;
@@ -400,7 +409,7 @@ static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
struct w1_slave *sl = node->sl;
struct w1_netlink_cmd *cmd = NULL;
- mutex_lock(&dev->mutex);
+ mutex_lock(&dev->bus_mutex);
dev->portid = node->block->portid;
if (sl && w1_reset_select_slave(sl))
err = -ENODEV;
@@ -437,7 +446,7 @@ static void w1_process_cb(struct w1_master *dev, struct w1_async_cmd *async_cmd)
else
atomic_dec(&dev->refcnt);
dev->portid = 0;
- mutex_unlock(&dev->mutex);
+ mutex_unlock(&dev->bus_mutex);
mutex_lock(&dev->list_mutex);
list_del(&async_cmd->async_entry);
--
1.7.10.4
next prev parent reply other threads:[~2014-01-15 5:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-29 6:45 [PATCH 00/14] w1: async netlink, search, fixes, and improvements David Fries
2013-12-29 6:45 ` [PATCH 01/14] w1: fix w1_send_slave dropping a slave id David Fries
2013-12-29 6:45 ` [PATCH 02/14] w1: fixup search to support abort from netlink David Fries
2013-12-29 6:45 ` [PATCH 03/14] w1: Only wake up the search process if it is going to be searching David Fries
2013-12-29 6:45 ` [PATCH 04/14] w1: increase w1_max_slave_count, allow write access David Fries
2013-12-29 6:45 ` [PATCH 05/14] w1: continue slave search where previous left off David Fries
2013-12-29 6:45 ` [PATCH 06/14] w1: new netlink commands, add/remove/list slaves David Fries
2013-12-29 6:45 ` [PATCH 07/14] w1: process w1 netlink commands in w1_process thread David Fries
2013-12-29 6:45 ` [PATCH 08/14] connector: add portid to unicast in addition to broadcasting David Fries
2013-12-29 6:45 ` [PATCH 09/14] w1: reply only to the requester portid David Fries
2013-12-29 6:45 ` [PATCH 10/14] w1: ds2490 reduce magic numbers David Fries
2013-12-29 6:45 ` [PATCH 11/14] w1: ds2490 USB setup fixes David Fries
2013-12-29 6:45 ` [PATCH 12/14] w1: ds2490 fix and enable hardware search David Fries
2013-12-29 6:45 ` [PATCH 13/14] w1: use family_data instead of rom in w1_slave David Fries
2013-12-29 6:45 ` [PATCH 14/14] w1: format for DocBook and fixes David Fries
2013-12-29 21:26 ` [PATCH 00/14] w1: async netlink, search, fixes, and improvements Evgeniy Polyakov
2014-01-15 4:52 ` David Fries [this message]
2014-01-15 20:58 ` [PATCH 16/16] hold bus_mutex in netlink and search Evgeniy Polyakov
2014-01-15 21:10 ` David Fries
2014-01-16 2:33 ` GregKH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140115045200.GA29560@spacedout.fries.net \
--to=david@fries.net \
--cc=linux-kernel@vger.kernel.org \
--cc=zbr@ioremap.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox