Re: [PATCH 16/18] charger: max14577: Add support for MAX77836 charger

[Lee Jones <lee.jones@linaro.org>]

On Tue, 28 Jan 2014, Krzysztof Kozlowski wrote:

> Add support for MAX77836 charger to the max14577 driver. The MAX77836
> charger is almost the same as 14577 model except:
>  - No dead-battery detection;
>  - Support for special charger (like in max77693);
>  - Support for DX over-voltage protection (like in max77693);
>  - Lower values of charging current (two times lower current for
>    slow/fast charge, much lower EOC current);
>  - Slightly different values in ChgTyp field of STATUS2 register. On
>    MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the
>    0x6 means special charger and 0x7 is reserved. Regardless of these
>    differences the driver maps them to one enum maxim_muic_charger_type.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> Cc: Kyungmin Park <kyungmin.park@samsung.com>
> Cc: Marek Szyprowski <m.szyprowski@samsung.com>
> Cc: Anton Vorontsov <anton@enomsg.org>
> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
> Cc: David Woodhouse <dwmw2@infradead.org>
> ---
>  drivers/extcon/extcon-max14577.c     |    2 +-
>  drivers/power/max14577_charger.c     |   81 +++++++++++++++++++++++++++-------
>  include/linux/mfd/max14577-private.h |   57 +++++++++++++++++-------
>  3 files changed, 106 insertions(+), 34 deletions(-)

For the MFD changes:
  Acked-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog