[PATCH 10/14] Documentation: mfd: s2mps11: Document support for S2MPS14

Krzysztof Kozlowski
2014-02-11T13:06:39Z

Add bindings documentation for S2MPS14 device to the s2mps11 driver.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Tomasz Figa <t.figa@samsung.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
---
Documentation/devicetree/bindings/mfd/s2mps11.txt | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index 15ee89c3cc7b..f69bec294f02 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,5 +1,5 @@

-* Samsung S2MPS11 Voltage and Current Regulator
+* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator

The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
@@ -7,7 +7,7 @@ interfaced to the host controller using an I2C interface. Each sub-block is
addressed by the host system using different I2C slave addresses.

Required properties:
-- compatible: Should be "samsung,s2mps11-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.

Optional properties:
@@ -59,10 +59,14 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
as per the datasheet of s2mps11.

- LDOn
- - valid values for n are 1 to 38
+ - valid values for n are:
+ - S2MPS11: 1 to 38
+ - S2MPS14: 1 to 25
- Example: LDO1, LD02, LDO28
- BUCKn
- - valid values for n are 1 to 10.
+ - valid values for n are:
+ - S2MPS11: 1 to 10
+ - S2MPS14: 1 to 5
- Example: BUCK1, BUCK2, BUCK9

Example:
--
1.7.9.5