public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Christoph Lameter <cl@linux.com>
To: Tejun Heo <tj@kernel.org>
Cc: akpm@linuxfoundation.org, rostedt@goodmis.org,
	linux-kernel@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Paul Mundt <lethal@linux-sh.org>,
	linux-sh@vger.kernel.org
Subject: [PATCH 46/48] sh: Replace __get_cpu_var uses
Date: Fri, 14 Feb 2014 14:19:27 -0600	[thread overview]
Message-ID: <20140214201908.863212873@linux.com> (raw)
In-Reply-To: 20140214201841.826179349@linux.com

[-- Attachment #1: this_sh --]
[-- Type: text/plain, Size: 9644 bytes --]

__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :


#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))



__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.


This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.




Transformations done to __get_cpu_var()


1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);


2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);


3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);


4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));


5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);


6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Paul Mundt <lethal@linux-sh.org>
CC: linux-sh@vger.kernel.org
Signed-off-by: Christoph Lameter <cl@linux.com>

Index: linux/arch/sh/kernel/hw_breakpoint.c
===================================================================
--- linux.orig/arch/sh/kernel/hw_breakpoint.c	2013-12-02 16:08:01.534307329 -0600
+++ linux/arch/sh/kernel/hw_breakpoint.c	2013-12-02 16:08:01.524307605 -0600
@@ -52,7 +52,7 @@ int arch_install_hw_breakpoint(struct pe
 	int i;
 
 	for (i = 0; i < sh_ubc->num_events; i++) {
-		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+		struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
 
 		if (!*slot) {
 			*slot = bp;
@@ -84,7 +84,7 @@ void arch_uninstall_hw_breakpoint(struct
 	int i;
 
 	for (i = 0; i < sh_ubc->num_events; i++) {
-		struct perf_event **slot = &__get_cpu_var(bp_per_reg[i]);
+		struct perf_event **slot = this_cpu_ptr(&bp_per_reg[i]);
 
 		if (*slot == bp) {
 			*slot = NULL;
Index: linux/arch/sh/kernel/kprobes.c
===================================================================
--- linux.orig/arch/sh/kernel/kprobes.c	2013-12-02 16:08:01.534307329 -0600
+++ linux/arch/sh/kernel/kprobes.c	2013-12-02 16:08:01.524307605 -0600
@@ -102,7 +102,7 @@ int __kprobes kprobe_handle_illslot(unsi
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
-	struct kprobe *saved = &__get_cpu_var(saved_next_opcode);
+	struct kprobe *saved = this_cpu_ptr(&saved_next_opcode);
 
 	if (saved->addr) {
 		arch_disarm_kprobe(p);
@@ -111,7 +111,7 @@ void __kprobes arch_remove_kprobe(struct
 		saved->addr = NULL;
 		saved->opcode = 0;
 
-		saved = &__get_cpu_var(saved_next_opcode2);
+		saved = this_cpu_ptr(&saved_next_opcode2);
 		if (saved->addr) {
 			arch_disarm_kprobe(saved);
 
@@ -129,14 +129,14 @@ static void __kprobes save_previous_kpro
 
 static void __kprobes restore_previous_kprobe(struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+	__this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
 	kcb->kprobe_status = kcb->prev_kprobe.status;
 }
 
 static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 					 struct kprobe_ctlblk *kcb)
 {
-	__get_cpu_var(current_kprobe) = p;
+	__this_cpu_write(current_kprobe, p);
 }
 
 /*
@@ -146,15 +146,15 @@ static void __kprobes set_current_kprobe
  */
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	__get_cpu_var(saved_current_opcode).addr = (kprobe_opcode_t *)regs->pc;
+	__this_cpu_write(saved_current_opcode.addr, (kprobe_opcode_t *)regs->pc);
 
 	if (p != NULL) {
 		struct kprobe *op1, *op2;
 
 		arch_disarm_kprobe(p);
 
-		op1 = &__get_cpu_var(saved_next_opcode);
-		op2 = &__get_cpu_var(saved_next_opcode2);
+		op1 = this_cpu_ptr(&saved_next_opcode);
+		op2 = this_cpu_ptr(&saved_next_opcode2);
 
 		if (OPCODE_JSR(p->opcode) || OPCODE_JMP(p->opcode)) {
 			unsigned int reg_nr = ((p->opcode >> 8) & 0x000F);
@@ -249,7 +249,7 @@ static int __kprobes kprobe_handler(stru
 			kcb->kprobe_status = KPROBE_REENTER;
 			return 1;
 		} else {
-			p = __get_cpu_var(current_kprobe);
+			p = __this_cpu_read(current_kprobe);
 			if (p->break_handler && p->break_handler(p, regs)) {
 				goto ss_probe;
 			}
@@ -336,9 +336,9 @@ int __kprobes trampoline_probe_handler(s
 			continue;
 
 		if (ri->rp && ri->rp->handler) {
-			__get_cpu_var(current_kprobe) = &ri->rp->kp;
+			__this_cpu_write(current_kprobe, &ri->rp->kp);
 			ri->rp->handler(ri, regs);
-			__get_cpu_var(current_kprobe) = NULL;
+			__this_cpu_write(current_kprobe, NULL);
 		}
 
 		orig_ret_address = (unsigned long)ri->ret_addr;
@@ -383,19 +383,19 @@ static int __kprobes post_kprobe_handler
 		cur->post_handler(cur, regs, 0);
 	}
 
-	p = &__get_cpu_var(saved_next_opcode);
+	p = this_cpu_ptr(&saved_next_opcode);
 	if (p->addr) {
 		arch_disarm_kprobe(p);
 		p->addr = NULL;
 		p->opcode = 0;
 
-		addr = __get_cpu_var(saved_current_opcode).addr;
-		__get_cpu_var(saved_current_opcode).addr = NULL;
+		addr = __this_cpu_read(saved_current_opcode).addr;
+		__this_cpu_write(saved_current_opcode.addr, NULL);
 
 		p = get_kprobe(addr);
 		arch_arm_kprobe(p);
 
-		p = &__get_cpu_var(saved_next_opcode2);
+		p = this_cpu_ptr(&saved_next_opcode2);
 		if (p->addr) {
 			arch_disarm_kprobe(p);
 			p->addr = NULL;
@@ -511,7 +511,7 @@ int __kprobes kprobe_exceptions_notify(s
 				if (kprobe_handler(args->regs)) {
 					ret = NOTIFY_STOP;
 				} else {
-					p = __get_cpu_var(current_kprobe);
+					p = __this_cpu_read(current_kprobe);
 					if (p->break_handler &&
 					    p->break_handler(p, args->regs))
 						ret = NOTIFY_STOP;
Index: linux/arch/sh/kernel/localtimer.c
===================================================================
--- linux.orig/arch/sh/kernel/localtimer.c	2013-12-02 16:08:01.534307329 -0600
+++ linux/arch/sh/kernel/localtimer.c	2013-12-02 16:08:01.524307605 -0600
@@ -32,7 +32,7 @@ static DEFINE_PER_CPU(struct clock_event
  */
 void local_timer_interrupt(void)
 {
-	struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
+	struct clock_event_device *clk = this_cpu_ptr(&local_clockevent);
 
 	irq_enter();
 	clk->event_handler(clk);
Index: linux/arch/sh/kernel/perf_event.c
===================================================================
--- linux.orig/arch/sh/kernel/perf_event.c	2013-12-02 16:08:01.534307329 -0600
+++ linux/arch/sh/kernel/perf_event.c	2013-12-02 16:08:01.524307605 -0600
@@ -227,7 +227,7 @@ again:
 
 static void sh_pmu_stop(struct perf_event *event, int flags)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 
@@ -245,7 +245,7 @@ static void sh_pmu_stop(struct perf_even
 
 static void sh_pmu_start(struct perf_event *event, int flags)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 
@@ -262,7 +262,7 @@ static void sh_pmu_start(struct perf_eve
 
 static void sh_pmu_del(struct perf_event *event, int flags)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 
 	sh_pmu_stop(event, PERF_EF_UPDATE);
 	__clear_bit(event->hw.idx, cpuc->used_mask);
@@ -272,7 +272,7 @@ static void sh_pmu_del(struct perf_event
 
 static int sh_pmu_add(struct perf_event *event, int flags)
 {
-	struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
 	int idx = hwc->idx;
 	int ret = -EAGAIN;
Index: linux/arch/sh/kernel/smp.c
===================================================================
--- linux.orig/arch/sh/kernel/smp.c	2013-12-02 16:08:01.534307329 -0600
+++ linux/arch/sh/kernel/smp.c	2013-12-02 16:08:01.524307605 -0600
@@ -111,7 +111,7 @@ void play_dead_common(void)
 	irq_ctx_exit(raw_smp_processor_id());
 	mb();
 
-	__get_cpu_var(cpu_state) = CPU_DEAD;
+	__this_cpu_write(cpu_state, CPU_DEAD);
 	local_irq_disable();
 }
 


  parent reply	other threads:[~2014-02-14 20:21 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-14 20:18 [PATCH 00/48] percpu: Consistent per cpu operations V4 Christoph Lameter
2014-02-14 20:18 ` [PATCH 01/48] percpu: Add raw_cpu_ops Christoph Lameter
2014-02-14 20:18 ` [PATCH 02/48] mm: Use raw_cpu ops for determining current NUMA node Christoph Lameter
2014-02-14 20:18 ` [PATCH 03/48] modules: Use raw_cpu_write for initialization of per cpu refcount Christoph Lameter
2014-02-14 20:18 ` [PATCH 04/48] net: Replace __this_cpu_inc in route.c with raw_cpu_inc Christoph Lameter
2014-02-14 20:18 ` [PATCH 05/48] percpu: Add preemption checks to __this_cpu ops Christoph Lameter
2014-03-04 22:27   ` Andrew Morton
2014-03-04 23:27     ` Steven Rostedt
2014-03-05  3:27     ` Christoph Lameter
2014-03-05 21:34       ` Andrew Morton
2014-02-14 20:18 ` [PATCH 06/48] mm: Replace __get_cpu_var uses with this_cpu_ptr Christoph Lameter
2014-02-14 20:18 ` [PATCH 07/48] tracing: " Christoph Lameter
2014-02-14 20:18 ` [PATCH 08/48] percpu: Replace __get_cpu_var " Christoph Lameter
2014-02-14 20:18 ` [PATCH 09/48] kernel misc: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:18 ` [PATCH 10/48] drivers/char/random: " Christoph Lameter
2014-02-14 20:18 ` [PATCH 11/48] drivers/cpuidle: Replace __get_cpu_var uses for address calculation Christoph Lameter
2014-02-14 20:18 ` [PATCH 12/48] drivers/oprofile: " Christoph Lameter
2014-02-14 20:18 ` [PATCH 13/48] drivers/leds: Replace __get_cpu_var use through this_cpu_ptr Christoph Lameter
2014-02-14 20:18 ` [PATCH 14/48] drivers/clocksource: Replace __get_cpu_var used for address calculation Christoph Lameter
2014-02-14 20:18 ` [PATCH 15/48] parisc: Replace __get_cpu_var uses " Christoph Lameter
2014-02-14 20:18 ` [PATCH 16/48] metag: " Christoph Lameter
2014-02-14 20:18 ` [PATCH 17/48] drivers/net/ethernet/tile: " Christoph Lameter
2014-02-14 20:18 ` [PATCH 18/48] drivers/net/ethernet/tile: __get_cpu_var call introduced in 3.14 Christoph Lameter
2014-02-14 20:19 ` [PATCH 19/48] tilegx: Another case of get_cpu_var Christoph Lameter
2014-02-14 20:19 ` [PATCH 20/48] time: Replace __get_cpu_var uses Christoph Lameter
2014-02-15 11:33   ` Thomas Gleixner
2014-02-14 20:19 ` [PATCH 21/48] scheduler: Replace __get_cpu_var with this_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 22/48] tick-sched: Fix two new uses of __get_cpu_ptr Christoph Lameter
2014-02-15 11:33   ` Thomas Gleixner
2014-02-14 20:19 ` [PATCH 23/48] block: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 24/48] rcu: Replace __this_cpu_ptr uses " Christoph Lameter
2014-02-16 16:17   ` Paul E. McKenney
2014-02-14 20:19 ` [PATCH 25/48] watchdog: Replace __raw_get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 26/48] net: Replace get_cpu_var through this_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 27/48] md: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 28/48] irqchips: Replace __this_cpu_ptr uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 29/48] x86: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 30/48] x86: Change __get_cpu_var calls introduced in 3.14 Christoph Lameter
2014-02-14 20:19 ` [PATCH 31/48] uv: Replace __get_cpu_var Christoph Lameter
2014-03-04 23:02   ` Andrew Morton
2014-03-04 23:42     ` Steven Rostedt
2014-03-04 23:47       ` Andrew Morton
2014-03-05  0:18     ` H. Peter Anvin
2014-03-05  3:31     ` Christoph Lameter
2014-03-05  4:00       ` Andrew Morton
2014-03-05 15:35         ` Christoph Lameter
2014-03-05 21:57         ` Christoph Lameter
2014-03-06  2:53           ` Mike Travis
2014-03-07 18:16             ` Christoph Lameter
2014-02-14 20:19 ` [PATCH 32/48] arm: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 33/48] MIPS: Replace __get_cpu_var uses in FPU emulator Christoph Lameter
2014-02-14 20:19 ` [PATCH 34/48] mips: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 35/48] s390: rename __this_cpu_ptr to raw_cpu_ptr Christoph Lameter
2014-02-14 20:19 ` [PATCH 36/48] s390: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 37/48] s390: Handle new __get_cpu_var calls added in 3.14 Christoph Lameter
2014-02-14 20:19 ` [PATCH 38/48] ia64: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 39/48] powerpc: " Christoph Lameter
2014-02-15  3:50   ` Benjamin Herrenschmidt
2014-02-15  4:26     ` Steven Rostedt
2014-02-15  7:54       ` Mike Galbraith
2014-02-15 10:00         ` Benjamin Herrenschmidt
2014-02-15 11:29           ` Mike Galbraith
2014-02-15  9:59       ` Benjamin Herrenschmidt
2014-02-15  9:42     ` Peter Zijlstra
2014-02-15 10:01       ` Benjamin Herrenschmidt
2014-02-15 12:07         ` Andreas Schwab
2014-02-15 15:45         ` Peter Zijlstra
2014-02-15 18:12           ` David Woodhouse
2014-02-15 20:32             ` Benjamin Herrenschmidt
2014-02-15 20:52               ` Benjamin Herrenschmidt
2014-02-14 20:19 ` [PATCH 40/48] powerpc: Handle new __get_cpu_var calls in 3.14 Christoph Lameter
2014-02-14 20:19 ` [PATCH 41/48] sparc: Replace __get_cpu_var uses Christoph Lameter
2014-02-14 20:19 ` [PATCH 42/48] tile: " Christoph Lameter
2014-02-14 20:19 ` [PATCH 43/48] blackfin: " Christoph Lameter
2014-02-14 20:19 ` [PATCH 44/48] avr32: Replace __get_cpu_var with __this_cpu_write Christoph Lameter
2014-02-14 20:19 ` [PATCH 45/48] alpha: Replace __get_cpu_var Christoph Lameter
2014-02-14 20:19 ` Christoph Lameter [this message]
2014-02-14 20:19 ` [PATCH 47/48] Remove __get_cpu_var and __raw_get_cpu_var macros [only in 3.16] Christoph Lameter
2014-02-14 20:19 ` [PATCH 48/48] percpu: Remove __this_cpu_ptr Christoph Lameter
2014-03-04 22:27 ` [PATCH 00/48] percpu: Consistent per cpu operations V4 Andrew Morton
2014-03-05  3:29   ` Christoph Lameter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140214201908.863212873@linux.com \
    --to=cl@linux.com \
    --cc=akpm@linuxfoundation.org \
    --cc=lethal@linux-sh.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=mingo@kernel.org \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox