Re: [PATCH v7 8/8] ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Allwinner sunxi SoCs

[Maxime Ripard <maxime.ripard@free-electrons.com>]

[-- Attachment #1: Type: text/plain, Size: 1210 bytes --]

Hi David,

On Sat, Feb 22, 2014 at 08:32:03AM +0100, David Lanzendörfer wrote:
> > Ditto. Plus, this is not a mod0 clock.
> Yes it is! But maybe the formulation hasn't been clear enough...

Technically, it's not, it has this phase controls features a mod0
clock doesn't have.

> > You never talked about the clock-names property, and which clocks
> > were supposed to be provided.
>
> Yes I did? But I expanded the text a little bit further...

I can't see any reference to the fact that clock-names should be set,
and what values should it hold.

Something like that:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt#n11

> > > +	interrupts = <0 32 4>;
> > > +	bus-width = <4>;
> > And you never talked about bus-width either.
> I can throw in a line for refering to the mmc slot gpio lib docs.

Yes, that would be great :)

> > Isn't the cd-gpios property requested too?
> I can refer to the docs there as well if you like... :-)

That would be great too :)

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]