[PATCH] mfd: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

[PATCH] mfd: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

[Michael Brunner]

This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
the module description is also updated.

Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
Acked-by: Christian Rauch <christian.rauch@kontron.com>
---
 drivers/mfd/Kconfig       |  5 +++++
 drivers/mfd/kempld-core.c | 24 ++++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 49bb445..f093401 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -270,13 +270,18 @@ config MFD_KEMPLD
 	  device may provide functions like watchdog, GPIO, UART and I2C bus.
 
 	  The following modules are supported:
+		* COMe-bHL6
 		* COMe-bIP#
 		* COMe-bPC2 (ETXexpress-PC)
 		* COMe-bSC# (ETXexpress-SC T#)
+		* COMe-cBT6
 		* COMe-cCT6
 		* COMe-cDC2 (microETXexpress-DC)
+		* COMe-cHL6
 		* COMe-cPC2 (microETXexpress-PC)
+		* COMe-mBT10
 		* COMe-mCT10
+		* COMe-mTT10 (nanoETXexpress-TT)
 		* ETX-OH
 
 	  This driver can also be built as a module. If so, the module
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c
index d3e2327..20a6afc 100644
--- a/drivers/mfd/kempld-core.c
+++ b/drivers/mfd/kempld-core.c
@@ -438,6 +438,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CHL6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "CHR2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -510,6 +518,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "CVV6",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "FRI2",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
@@ -533,6 +549,14 @@ static struct dmi_system_id __initdata kempld_dmi_table[] = {
 		.driver_data = (void *)&kempld_platform_data_generic,
 		.callback = kempld_create_platform_device,
 	}, {
+		.ident = "MVV1",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
+			DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"),
+		},
+		.driver_data = (void *)&kempld_platform_data_generic,
+		.callback = kempld_create_platform_device,
+	}, {
 		.ident = "NTC1",
 		.matches = {
 			DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"),
-- 
1.8.5.1

Re: [PATCH] mfd: Add support for COMe-mBT10, COMe-cBT6 and COMe-cHL6 to Kontron PLD driver

[Lee Jones]

> This patch adds DMI system IDs for the Kontron modules COMe-mBT10, COMe-cBT6
> and COMe-cHL6 to the Kontron PLD driver. The list of supported products in
> the module description is also updated.
> 
> Signed-off-by: Michael Brunner <michael.brunner@kontron.com>
> Acked-by: Christian Rauch <christian.rauch@kontron.com>
> ---
>  drivers/mfd/Kconfig       |  5 +++++
>  drivers/mfd/kempld-core.c | 24 ++++++++++++++++++++++++
>  2 files changed, 29 insertions(+)

Applied, thanks.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog