From: markus <markus@kola.li>
To: Mark Knecht <markknecht@gmail.com>
Cc: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>,
Sreekanth Reddy <Sreekanth.Reddy@lsi.com>,
support@lsi.com, DL-MPTFusionLinux@lsi.com,
linux-scsi@vger.kernel.org,
Linux Kernel List <linux-kernel@vger.kernel.org>
Subject: Re: Slow I/O performance on SAS1064
Date: Fri, 7 Mar 2014 10:46:07 +0100 [thread overview]
Message-ID: <20140307094607.GA13346@localhost.localdomain> (raw)
In-Reply-To: <CAK2H+eesWkK_w66e5BLcA_Ft0FHNTuNYmxF_LceMHVupX8T_xg@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 4040 bytes --]
On Thu, Mar 06, 2014 at 12:51:27PM -0800, Mark Knecht wrote:
> On Wed, Mar 5, 2014 at 1:40 PM, markus <markus@kola.li> wrote:
> > On Wed, Mar 05, 2014 at 10:21:07AM -0800, Mark Knecht wrote:
> >> On Wed, Mar 5, 2014 at 9:50 AM, Markus <markus@kola.li> wrote:
> >> <SNIP>
> I am not familiar with this message:
>
> "Device supports SMART and is Disabled"
>
> but there are lots of posts out there with folks asking about it.
> Possibly you can figure out what's causing smart not to turn on, get
> it turned on and get some info.
right , thats why i writing to the scsi and lsi devs , because die disk supports smart and lots of other features, but the controller driver failes to enable support for this.
Now i get that the mpt driver provides /dev/sg[0-1]
root@outpost:~# smartctl -d scsi -x /dev/sg1
smartctl 6.2 2013-07-26 r3841 [sparc64-linux-3.13.5-mar] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Logical block size: 512 bytes
Logical Unit id: 0x50000394e2380537
Serial number: 7365P4KNT
Device type: disk
Local Time is: Fri Mar 7 09:54:47 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
Temperature Warning: Disabled or Not Supported
Read Cache is: Enabled
Writeback Cache is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Error Counter logging not supported
Device does not support Self Test logging
Device does not support Background scan results logging
scsiPrintSasPhy Log Sense Failed [unsupported field in scsi command]
so i had read those posts and i tried but it won't work.
root@outpost:~/lsiutil# smartctl -r scsiioctl,3 -s on -d scsi /dev/sg1
smartctl 6.2 2013-07-26 r3841 [sparc64-linux-3.13.5-mar] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
[inquiry: 12 01 00 01 fc 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds resid=500
Incoming data, len=8:
00 00 00 00 04 00 80 83 89
[inquiry: 12 00 00 00 24 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=4 milliseconds resid=0
Incoming data, len=36:
00 00 00 05 12 45 00 00 02 41 54 41 20 20 20 20 20
10 54 4f 53 48 49 42 41 20 4d 51 30 31 41 42 42 32
20 30 55 20 20
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
[mode sense(6): 1a 00 1c 00 40 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=4 milliseconds resid=40
Incoming data, len=24:
00 17 00 00 08 00 00 00 00 00 00 02 00 1c 0a 08 06
10 08 00 00 00 00 00 00 00
[mode sense(6): 1a 00 5c 00 40 00 ]
scsi_status=0x0, host_status=0x0, driver_status=0x0
info=0x0 duration=0 milliseconds resid=40
Incoming data, len=24:
00 17 00 00 08 00 00 00 00 00 00 02 00 1c 0a 00 00
10 00 00 00 00 00 00 00 00
00 00 00 00 08 00 00 00 00 00 00 02 00 1c 0a 08 06
10 08 00 00 00 00 00 00 00
[mode select(6): 15 10 00 00 18 00 ]
Outgoing data, len=24:
scsi_status=0x2, host_status=0x0, driver_status=0x8
info=0x1 duration=0 milliseconds resid=24
>>> Sense buffer, len=18:
00 70 00 0b 00 00 00 00 0a 00 00 00 00 00 00 00 00
10 00 00
status=2: sense_key=b asc=0 ascq=0
unable to enable Exception control and warning [aborted command]
>
> Sorry I cannot help more.
>
> Good luck,
> Mark
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2014-03-07 9:40 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-05 17:50 Slow I/O performance on SAS1064 Markus
2014-03-05 18:21 ` Mark Knecht
2014-03-05 21:40 ` markus
2014-03-06 20:51 ` Mark Knecht
2014-03-07 9:46 ` markus [this message]
[not found] <CAN7X1Umb_wyTCk9w590AnSTFgL=3CC5x8zGNiGZoAdNEej9TCQ@mail.gmail.com>
2014-03-08 20:14 ` markus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140307094607.GA13346@localhost.localdomain \
--to=markus@kola.li \
--cc=DL-MPTFusionLinux@lsi.com \
--cc=Nagalakshmi.Nandigama@lsi.com \
--cc=Sreekanth.Reddy@lsi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=markknecht@gmail.com \
--cc=support@lsi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox