Re: [PATCH v3 3/5] pinctrl: st: add pinctrl support for the STiH407 SoC

[Lee Jones <lee.jones@linaro.org>]

> From: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> 
> This patch adds the initial support for pinctrl based on H407 SoC.
> 
> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>

SOBs should be in order of submission flow and author's should only be
kept if the patch is unchanged. If it's been adapted you will require
a re-review and they Acked-by or Reviewed-by tag.

> ---
>  drivers/pinctrl/pinctrl-st.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c
> index 1721611..d1886b4 100644
> --- a/drivers/pinctrl/pinctrl-st.c
> +++ b/drivers/pinctrl/pinctrl-st.c
> @@ -390,6 +390,19 @@ static const struct st_pctl_data  stih416_data = {
>  	.alt = 0, .oe = 40, .pu = 50, .od = 60, .rt = 100,
>  };
>  
> +static const struct st_pctl_data  stih407_flashdata = {

Nit: Double space.

> +	.rt_style	= st_retime_style_none,
> +	.input_delays	= stih416_delays,
> +	.ninput_delays	= 14,

ARRAY_SIZE(stih416_delays)

> +	.output_delays	= stih416_delays,
> +	.noutput_delays = 14,

ARRAY_SIZE(stih416_delays)

> +	.alt = 0,
> +	.oe = -1, /* Not Available */
> +	.pu = -1, /* Not Available */
> +	.od = 60,
> +	.rt = 100,
> +};
> +
>  /* Low level functions.. */
>  static inline int st_gpio_bank(int gpio)
>  {
> @@ -1596,6 +1609,10 @@ static struct of_device_id st_pctl_of_match[] = {
>  	{ .compatible = "st,stih416-rear-pinctrl", .data = &stih416_data},
>  	{ .compatible = "st,stih416-fvdp-fe-pinctrl", .data = &stih416_data},
>  	{ .compatible = "st,stih416-fvdp-lite-pinctrl", .data = &stih416_data},
> +	{ .compatible = "st,stih407-sbc-pinctrl", .data = &stih416_data},
> +	{ .compatible = "st,stih407-front-pinctrl", .data = &stih416_data},
> +	{ .compatible = "st,stih407-rear-pinctrl", .data = &stih416_data},
> +	{ .compatible = "st,stih407-flash-pinctrl", .data = &stih407_flashdata},
>  	{ /* sentinel */ }
>  };

After the small changes above, feel free to add my:
  Acked-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog