From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753800AbaCJQXE (ORCPT ); Mon, 10 Mar 2014 12:23:04 -0400 Received: from mail-bk0-f43.google.com ([209.85.214.43]:33580 "EHLO mail-bk0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753581AbaCJQXC (ORCPT ); Mon, 10 Mar 2014 12:23:02 -0400 Date: Mon, 10 Mar 2014 16:22:54 +0000 From: Lee Jones To: mark.rutland@arm.com Cc: alexandre.torgue@st.com, devicetree@vger.kernel.org, Srinivas Kandagatla , linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x Message-ID: <20140310162254.GG13661@lee--X1> References: <1392377036-12816-1-git-send-email-lee.jones@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1392377036-12816-1-git-send-email-lee.jones@linaro.org> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org phy: miphy365x: Add Device Tree bindings for the MiPHY365x The MiPHY365x is a Generic PHY which can serve various SATA or PCIe devices. It has 2 ports which it can use for either; both SATA, both PCIe or one of each in any configuration. Cc: devicetree@vger.kernel.org Cc: Srinivas Kandagatla Signed-off-by: Lee Jones diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt new file mode 100644 index 0000000..15d105a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt @@ -0,0 +1,62 @@ +STMicroelectronics STi MIPHY365x PHY binding +============================================ + +This binding describes a miphy device that is used to control PHY hardware +for SATA and PCIe. + +Required properties: +- compatible : Should be "st,miphy365x-phy" +- #phy-cells : Should be 2 (See second example) + First cell is the port number from: + - MIPHY_PORT_0 + - MIPHY_PORT_1 + Second cell is device type from: + - MIPHY_TYPE_SATA + - MIPHY_TYPE_PCI +- reg : Address and length of register sets for each device in + "reg-names" +- reg-names : The names of the register addresses corresponding to the + registers filled in "reg", from: + - sata0: For SATA port 0 registers + - sata1: For SATA port 1 registers + - pcie0: For PCIE port 0 registers + - pcie1: For PCIE port 1 registers +- st,syscfg : Should be a phandle of the system configuration register group + which contain the SATA, PCIe mode setting bits + +Optional properties: +- st,sata-gen : Generation of locally attached SATA IP. Expected values + are {1,2,3). If not supplied generation 1 hardware will + be expected +- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp) +- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp) + +Example: + + miphy365x_phy: miphy365x@0 { + compatible = "st,miphy365x-phy"; + #phy-cells = <2>; + reg = <0xfe382000 0x100>, + <0xfe38a000 0x100>, + <0xfe394000 0x100>, + <0xfe804000 0x100>; + reg-names = "sata0", "sata1", "pcie0", "pcie1"; + st,syscfg = <&syscfg_rear>; + }; + +Specifying phy control of devices +================================= + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the miphy device node, a port number +and a device type. + +Example: + +#include + + sata0: sata@fe380000 { + ... + phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + ... + }; -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog