public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Hans de Goede <hdegoede@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
	linux-arm-kernel@lists.infradead.org,
	devicetree <devicetree@vger.kernel.org>,
	linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 1/2] irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
Date: Mon, 17 Mar 2014 12:12:13 +0100	[thread overview]
Message-ID: <20140317111213.GG27873@lukather> (raw)
In-Reply-To: <1394895894-8891-2-git-send-email-hdegoede@redhat.com>

[-- Attachment #1: Type: text/plain, Size: 2743 bytes --]

On Sat, Mar 15, 2014 at 04:04:53PM +0100, Hans de Goede wrote:
> Since the sun4i irq chip does not require any action and clears the interrupt
> when the level goes back to inactive, we don't need to mask / unmask for
> non oneshot IRQs, to achieve this we make sun4i_irq_ack a nop for all irqs
> except irq 0 and use handle_fasteoi_irq for all interrupts.
> 
> Now there might be a case when the device reactivates the interrupt
> before the RETI. But that does not matter as we run the primary
> interrupt handlers with interrupts disabled.
> 
> This also allows us to get rid of needing to use 2 irq_chip structs, this
> means that the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED will now influence
> all interrupts rather then just irq 0, but that does not matter as the eoi
> is now a nop anyways for all interrupts but irq 0.
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
>  drivers/irqchip/irq-sun4i.c | 18 ++++--------------
>  1 file changed, 4 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
> index a0ed1ea..6a8c88d 100644
> --- a/drivers/irqchip/irq-sun4i.c
> +++ b/drivers/irqchip/irq-sun4i.c
> @@ -45,6 +45,9 @@ static void sun4i_irq_ack(struct irq_data *irqd)
>  	int reg = irq / 32;
>  	u32 val;
>  
> +	if (irq != 0)
> +		return; /* Only IRQ 0 / the ENMI needs to be acked */
> +
>  	val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
>  	writel(val | (1 << irq_off),
>  	       sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
> @@ -76,13 +79,6 @@ static void sun4i_irq_unmask(struct irq_data *irqd)
>  
>  static struct irq_chip sun4i_irq_chip = {
>  	.name		= "sun4i_irq",
> -	.irq_mask	= sun4i_irq_mask,
> -	.irq_unmask	= sun4i_irq_unmask,
> -};
> -
> -/* IRQ 0 / the ENMI needs a late eoi call */
> -static struct irq_chip sun4i_irq_chip_enmi = {
> -	.name		= "sun4i_irq",
>  	.irq_eoi	= sun4i_irq_ack,
>  	.irq_mask	= sun4i_irq_mask,
>  	.irq_unmask	= sun4i_irq_unmask,
> @@ -92,13 +88,7 @@ static struct irq_chip sun4i_irq_chip_enmi = {
>  static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
>  			 irq_hw_number_t hw)
>  {
> -	if (hw == 0)
> -		irq_set_chip_and_handler(virq, &sun4i_irq_chip_enmi,
> -					 handle_fasteoi_irq);
> -	else
> -		irq_set_chip_and_handler(virq, &sun4i_irq_chip,
> -					 handle_level_irq);
> -
> +	irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq);
>  	set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);

Oh.. And you just did. Nevermind then.

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2014-03-17 11:15 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-15 15:04 [PATCH v2 0/2] irqchip: sun4i: Use handle_fasteoi_irq for all irqs Hans de Goede
2014-03-15 15:04 ` [PATCH v2 1/2] irqchip: sun4i: Use handle_fasteoi_irq for all interrupts Hans de Goede
2014-03-17 11:12   ` Maxime Ripard [this message]
2014-03-19 11:36   ` [tip:irq/core] " tip-bot for Hans de Goede
2014-03-15 15:04 ` [PATCH v2 2/2] irqchip: sun4i: simplify sun4i_irq_ack Hans de Goede
2014-03-17 11:12   ` Maxime Ripard
2014-03-19 11:36   ` [tip:irq/core] irqchip: sun4i: Simplify sun4i_irq_ack tip-bot for Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140317111213.GG27873@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox