From: Oleg Nesterov <oleg@redhat.com>
To: Ingo Molnar <mingo@elte.hu>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Anton Arapov <aarapov@redhat.com>,
David Long <dave.long@linaro.org>,
Denys Vlasenko <dvlasenk@redhat.com>,
"Frank Ch. Eigler" <fche@redhat.com>,
Jim Keniston <jkenisto@us.ibm.com>,
Jonathan Lebon <jlebon@redhat.com>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 9/9] uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible
Date: Fri, 4 Apr 2014 20:51:42 +0200 [thread overview]
Message-ID: <20140404185142.GA14756@redhat.com> (raw)
In-Reply-To: <20140404185038.GA14679@redhat.com>
SIGILL after the failed arch_uprobe_post_xol() should only be used as
a last resort, we should try to restart the probed insn if possible.
Currently only adjust_ret_addr() can fail, and this can only happen if
another thread unmapped our stack after we executed "call" out-of-line.
Most probably the application if buggy, but even in this case it can
have a handler for SIGSEGV/etc. And in theory it can be even correct
and do something non-trivial with its memory.
Of course we can't restart unconditionally, so arch_uprobe_post_xol()
does this only if ->post_xol() returns -ERESTART even if currently this
is the only possible error.
Note: this is not "perfect", we do not want the extra handler_chain()
after restart, but I think this is the best solution we can realistically
do without too much uglifications.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
arch/x86/kernel/uprobes.c | 15 +++++++++++----
1 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index e72903e..b820668 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -443,16 +443,17 @@ static int default_post_xol_op(struct arch_uprobe *auprobe, struct pt_regs *regs
{
struct uprobe_task *utask = current->utask;
long correction = (long)(utask->vaddr - utask->xol_vaddr);
- int ret = 0;
handle_riprel_post_xol(auprobe, regs, &correction);
if (auprobe->fixups & UPROBE_FIX_IP)
regs->ip += correction;
- if (auprobe->fixups & UPROBE_FIX_CALL)
- ret = adjust_ret_addr(regs->sp, correction);
+ if (auprobe->fixups & UPROBE_FIX_CALL) {
+ if (adjust_ret_addr(regs->sp, correction))
+ return -ERESTART;
+ }
- return ret;
+ return 0;
}
static struct uprobe_xol_ops default_xol_ops = {
@@ -599,6 +600,12 @@ int arch_uprobe_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
int err = auprobe->ops->post_xol(auprobe, regs);
if (err) {
arch_uprobe_abort_xol(auprobe, regs);
+ /*
+ * Restart the probed insn. ->post_xol() must ensure
+ * this is really possible if it returns -ERESTART.
+ */
+ if (err == -ERESTART)
+ return 0;
return err;
}
}
--
1.5.5.1
next prev parent reply other threads:[~2014-04-04 18:52 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-04 18:50 [PATCH v2 0/9] uprobes/x86: preparations to fix the reprel jmp/call handling Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 1/9] uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 2/9] uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 3/9] uprobes/x86: Kill the "ia32_compat" check in handle_riprel_insn(), remove "mm" arg Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 4/9] uprobes/x86: Gather "riprel" functions together Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 5/9] uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 6/9] uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Oleg Nesterov
2014-04-08 9:10 ` Masami Hiramatsu
2014-04-08 16:10 ` Oleg Nesterov
2014-04-08 18:10 ` Oleg Nesterov
2014-04-09 12:58 ` Masami Hiramatsu
2014-04-09 16:55 ` Oleg Nesterov
2014-04-10 13:58 ` Masami Hiramatsu
2014-04-04 18:51 ` [PATCH v2 7/9] uprobes/x86: Conditionalize the usage of handle_riprel_insn() Oleg Nesterov
2014-04-04 18:51 ` [PATCH v2 8/9] uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Oleg Nesterov
2014-04-04 18:51 ` Oleg Nesterov [this message]
2014-04-04 21:56 ` [PATCH v2 9/9] uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible Jim Keniston
2014-04-05 12:46 ` Oleg Nesterov
2014-04-04 19:32 ` [PATCH v2 0/9] uprobes/x86: preparations to fix the reprel jmp/call handling Oleg Nesterov
2014-04-04 19:52 ` Oleg Nesterov
2014-04-04 23:44 ` Jim Keniston
2014-04-06 20:15 ` [RFC PATCH 0/6] uprobes/x86: " Oleg Nesterov
2014-04-06 20:16 ` [RFC PATCH 1/6] uprobes/x86: Emulate unconditional rip-relative jmp's Oleg Nesterov
2014-04-08 20:36 ` Jim Keniston
2014-04-09 14:47 ` Oleg Nesterov
2014-04-06 20:16 ` [RFC PATCH 2/6] uprobes/x86: Emulate nop's using ops->emulate() Oleg Nesterov
2014-04-06 20:16 ` [RFC PATCH 3/6] uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() Oleg Nesterov
2014-04-07 20:34 ` Jim Keniston
2014-04-07 20:42 ` Jim Keniston
2014-04-06 20:16 ` [RFC PATCH 4/6] uprobes/x86: Emulate rip-relative call's Oleg Nesterov
2014-04-08 22:26 ` Jim Keniston
2014-04-09 15:43 ` Oleg Nesterov
2014-04-09 21:25 ` Jim Keniston
2014-04-10 4:05 ` Jim Keniston
2014-04-10 13:41 ` Denys Vlasenko
2014-04-10 13:57 ` Masami Hiramatsu
2014-04-10 14:20 ` Denys Vlasenko
2014-04-11 3:03 ` Masami Hiramatsu
2014-04-11 12:23 ` Denys Vlasenko
2014-04-14 14:22 ` Masami Hiramatsu
2014-04-18 15:17 ` Denys Vlasenko
2014-04-10 14:28 ` Oleg Nesterov
2014-04-10 17:00 ` Oleg Nesterov
2014-04-11 2:38 ` Masami Hiramatsu
2014-04-11 1:29 ` Masami Hiramatsu
2014-04-10 14:18 ` Oleg Nesterov
2014-04-10 14:30 ` Denys Vlasenko
2014-04-10 17:02 ` Denys Vlasenko
2014-04-14 5:14 ` Masami Hiramatsu
2014-04-14 12:24 ` Denys Vlasenko
2014-04-14 14:05 ` Masami Hiramatsu
2014-04-06 20:16 ` [RFC PATCH 5/6] uprobes/x86: Emulate rip-relative conditional "short" jmp's Oleg Nesterov
2014-04-07 14:27 ` [RFC PATCH v2 " Oleg Nesterov
2014-04-07 16:41 ` Oleg Nesterov
2014-04-08 22:53 ` Jim Keniston
2014-04-09 16:42 ` Oleg Nesterov
2014-04-06 20:16 ` [RFC PATCH 6/6] uprobes/x86: Emulate rip-relative conditional "near" jmp's Oleg Nesterov
2014-04-07 14:28 ` Oleg Nesterov
2014-04-08 23:07 ` Jim Keniston
2014-04-09 16:50 ` Oleg Nesterov
2014-04-07 18:54 ` [RFC PATCH 0/6] uprobes/x86: fix the reprel jmp/call handling Jim Keniston
2014-04-08 11:43 ` Masami Hiramatsu
2014-04-08 16:28 ` Oleg Nesterov
2014-04-08 19:26 ` Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 " Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 1/6] uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 2/6] uprobes/x86: Emulate unconditional rip-relative jmp's Oleg Nesterov
2014-04-10 12:37 ` Denys Vlasenko
2014-04-10 13:47 ` Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 3/6] uprobes/x86: Emulate nop's using ops->emulate() Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 4/6] uprobes/x86: Emulate rip-relative call's Oleg Nesterov
2014-04-10 12:53 ` Denys Vlasenko
2014-04-10 13:15 ` Masami Hiramatsu
2014-04-10 13:41 ` Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 5/6] uprobes/x86: Emulate rip-relative conditional "short" jmp's Oleg Nesterov
2014-04-09 19:44 ` [RFC PATCH v2 6/6] uprobes/x86: Emulate rip-relative conditional "near" jmp's Oleg Nesterov
2014-04-10 12:49 ` Denys Vlasenko
2014-04-09 21:34 ` [RFC PATCH v2 0/6] uprobes/x86: fix the reprel jmp/call handling Jim Keniston
2014-04-10 12:28 ` Denys Vlasenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140404185142.GA14756@redhat.com \
--to=oleg@redhat.com \
--cc=aarapov@redhat.com \
--cc=ananth@in.ibm.com \
--cc=dave.long@linaro.org \
--cc=dvlasenk@redhat.com \
--cc=fche@redhat.com \
--cc=jkenisto@us.ibm.com \
--cc=jlebon@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@elte.hu \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).