From: Borislav Petkov <bp@alien8.de>
To: e1000-devel@lists.sourceforge.net
Cc: netdev@vger.kernel.org, lkml <linux-kernel@vger.kernel.org>
Subject: e1000e 0000:00:19.0 eth0: Hardware Error
Date: Thu, 10 Apr 2014 13:59:41 +0200 [thread overview]
Message-ID: <20140410115941.GI29093@pd.tnic> (raw)
Hi guys,
I started getting those sporadic
[133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error
[133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error
[133182.077209] pci_pm_runtime_suspend(): e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2
messages with 3.14 and I haven't had them before. After this, I do
rmmod e1000e && modprobe e1000e
and I get:
[133221.891555] e1000e 0000:00:19.0 eth0: removed PHC
[133228.181552] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133228.181562] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133228.182332] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133229.009837] e1000e: probe of 0000:00:19.0 failed with error -2
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133307.107959] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133307.935921] e1000e: probe of 0000:00:19.0 failed with error -2
...
[133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[133841.362520] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[133842.192710] e1000e: probe of 0000:00:19.0 failed with error -2
each time I try and eth0 is dead. Only a reboot helps, I've come to find
out so far.
Any ideas?
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next reply other threads:[~2014-04-10 11:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-10 11:59 Borislav Petkov [this message]
2014-04-10 14:59 ` [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error Fujinaka, Todd
2014-04-10 15:45 ` Ertman, DavidX M
2014-04-10 16:33 ` Borislav Petkov
2014-05-23 16:16 ` e1000e 0000:00:19.0 eth0: Detected Hardware Unit Hang: Borislav Petkov
2014-04-10 15:54 ` [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error Ronciak, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140410115941.GI29093@pd.tnic \
--to=bp@alien8.de \
--cc=e1000-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox