From: Oleg Nesterov <oleg@redhat.com>
To: Ingo Molnar <mingo@elte.hu>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Anton Arapov <aarapov@redhat.com>,
David Long <dave.long@linaro.org>,
Denys Vlasenko <dvlasenk@redhat.com>,
"Frank Ch. Eigler" <fche@redhat.com>,
Jim Keniston <jkenisto@us.ibm.com>,
Jonathan Lebon <jlebon@redhat.com>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 11/15] uprobes/x86: Emulate unconditional relative jmp's
Date: Sun, 13 Apr 2014 19:46:00 +0200 [thread overview]
Message-ID: <20140413174600.GA11885@redhat.com> (raw)
In-Reply-To: <20140413174508.GA11811@redhat.com>
Currently we always execute all insns out-of-line, including relative
jmp's and call's. This assumes that even if regs->ip points to nowhere
after the single-step, default_post_xol_op(UPROBE_FIX_IP) logic will
update it correctly.
However, this doesn't work if this regs->ip == xol_vaddr + insn_offset
is not canonical. In this case CPU generates #GP and general_protection()
kills the task which tries to execute this insn out-of-line.
Now that we have uprobe_xol_ops we can teach uprobes to emulate these
insns and solve the problem. This patch adds branch_xol_ops which has
a single branch_emulate_op() hook, so far it can only handle rel8/32
relative jmp's.
TODO: move ->fixup into the union along with rip_rela_target_address.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jonathan Lebon <jlebon@redhat.com>
Reviewed-by: Jim Keniston <jkenisto@us.ibm.com>
---
arch/x86/include/asm/uprobes.h | 8 +++++++-
arch/x86/kernel/uprobes.c | 38 ++++++++++++++++++++++++++++++++++++++
2 files changed, 45 insertions(+), 1 deletions(-)
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index 9f8210b..e9fd4d5 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -44,9 +44,15 @@ struct arch_uprobe {
u16 fixups;
const struct uprobe_xol_ops *ops;
+ union {
#ifdef CONFIG_X86_64
- unsigned long rip_rela_target_address;
+ unsigned long rip_rela_target_address;
#endif
+ struct {
+ s32 offs;
+ u8 ilen;
+ } branch;
+ };
};
struct arch_uprobe_task {
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index ef59ef9..b1d129d 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -461,6 +461,40 @@ static struct uprobe_xol_ops default_xol_ops = {
.post_xol = default_post_xol_op,
};
+static bool branch_emulate_op(struct arch_uprobe *auprobe, struct pt_regs *regs)
+{
+ regs->ip += auprobe->branch.ilen + auprobe->branch.offs;
+ return true;
+}
+
+static struct uprobe_xol_ops branch_xol_ops = {
+ .emulate = branch_emulate_op,
+};
+
+/* Returns -ENOSYS if branch_xol_ops doesn't handle this insn */
+static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
+{
+
+ switch (OPCODE1(insn)) {
+ case 0xeb: /* jmp 8 */
+ case 0xe9: /* jmp 32 */
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ /* has the side-effect of processing the entire instruction */
+ insn_get_length(insn);
+ if (WARN_ON_ONCE(!insn_complete(insn)))
+ return -ENOEXEC;
+
+ auprobe->branch.ilen = insn->length;
+ auprobe->branch.offs = insn->immediate.value;
+
+ auprobe->ops = &branch_xol_ops;
+ return 0;
+}
+
/**
* arch_uprobe_analyze_insn - instruction analysis including validity and fixups.
* @mm: the probed address space.
@@ -478,6 +512,10 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
if (ret)
return ret;
+ ret = branch_setup_xol_ops(auprobe, &insn);
+ if (ret != -ENOSYS)
+ return ret;
+
/*
* Figure out which fixups arch_uprobe_post_xol() will need to perform,
* and annotate arch_uprobe->fixups accordingly. To start with, ->fixups
--
1.5.5.1
next prev parent reply other threads:[~2014-04-13 17:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-13 17:45 [PATCH v3 00/15] uprobes/x86: fix the handling of relative jmp's/call's Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 01/15] uprobes: Kill UPROBE_SKIP_SSTEP and can_skip_sstep() Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 02/15] uprobes/x86: Fold prepare_fixups() into arch_uprobe_analyze_insn() Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 03/15] uprobes/x86: Kill the "ia32_compat" check in handle_riprel_insn(), remove "mm" arg Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 04/15] uprobes/x86: Gather "riprel" functions together Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 05/15] uprobes/x86: move the UPROBE_FIX_{RIP,IP,CALL} code at the end of pre/post hooks Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 06/15] uprobes/x86: Introduce uprobe_xol_ops and arch_uprobe->ops Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 07/15] uprobes/x86: Conditionalize the usage of handle_riprel_insn() Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 08/15] uprobes/x86: Send SIGILL if arch_uprobe_post_xol() fails Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 09/15] uprobes/x86: Teach arch_uprobe_post_xol() to restart if possible Oleg Nesterov
2014-04-13 17:45 ` [PATCH v3 10/15] uprobes/x86: Introduce sizeof_long(), cleanup adjust_ret_addr() and arch_uretprobe_hijack_return_addr() Oleg Nesterov
2014-04-13 17:46 ` Oleg Nesterov [this message]
2014-04-13 17:46 ` [PATCH v3 12/15] uprobes/x86: Emulate nop's using ops->emulate() Oleg Nesterov
2014-04-13 17:46 ` [PATCH v3 13/15] uprobes/x86: Emulate relative call's Oleg Nesterov
2014-04-13 17:46 ` [PATCH v3 14/15] uprobes/x86: Emulate relative conditional "short" jmp's Oleg Nesterov
2014-04-13 17:46 ` [PATCH v3 15/15] uprobes/x86: Emulate relative conditional "near" jmp's Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140413174600.GA11885@redhat.com \
--to=oleg@redhat.com \
--cc=aarapov@redhat.com \
--cc=ananth@in.ibm.com \
--cc=dave.long@linaro.org \
--cc=dvlasenk@redhat.com \
--cc=fche@redhat.com \
--cc=jkenisto@us.ibm.com \
--cc=jlebon@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@elte.hu \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox