From: Oleg Nesterov <oleg@redhat.com>
To: Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>,
Anton Arapov <aarapov@redhat.com>,
David Long <dave.long@linaro.org>,
Denys Vlasenko <dvlasenk@redhat.com>,
"Frank Ch. Eigler" <fche@redhat.com>,
Jim Keniston <jkenisto@us.ibm.com>,
Jonathan Lebon <jlebon@redhat.com>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/5] uprobes/x86: Add is_64bit_mm(), kill validate_insn_bits()
Date: Sat, 19 Apr 2014 19:01:51 +0200 [thread overview]
Message-ID: <20140419170151.GA30857@redhat.com> (raw)
In-Reply-To: <20140419170104.GA30667@redhat.com>
1. Extract the ->ia32_compat check from 64bit validate_insn_bits()
into the new helper, is_64bit_mm(), it will have more users.
TODO: this checks is actually wrong if mm owner is X32 task,
we need another fix which changes set_personality_ia32().
TODO: even worse, the whole 64-or-32-bit logic is very broken
and the fix is not simple, we need the nontrivial changes in
the core uprobes code.
2. Kill validate_insn_bits() and change its single caller to use
uprobe_init_insn(is_64bit_mm(mm).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
---
arch/x86/kernel/uprobes.c | 20 +++++++++-----------
1 files changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 68c63ab..5876ba5 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -231,6 +231,11 @@ static int uprobe_init_insn(struct arch_uprobe *auprobe, struct insn *insn, bool
}
#ifdef CONFIG_X86_64
+static inline bool is_64bit_mm(struct mm_struct *mm)
+{
+ return !config_enabled(CONFIG_IA32_EMULATION) ||
+ !mm->context.ia32_compat;
+}
/*
* If arch_uprobe->insn doesn't use rip-relative addressing, return
* immediately. Otherwise, rewrite the instruction so that it accesses
@@ -355,13 +360,11 @@ handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs, long *
*correction += 4;
}
}
-
-static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
+#else /* 32-bit: */
+static inline bool is_64bit_mm(struct mm_struct *mm)
{
- bool x86_64 = !mm->context.ia32_compat;
- return uprobe_init_insn(auprobe, insn, x86_64);
+ return false;
}
-#else /* 32-bit: */
/*
* No RIP-relative addressing on 32-bit
*/
@@ -376,11 +379,6 @@ static void handle_riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *
long *correction)
{
}
-
-static int validate_insn_bits(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
-{
- return uprobe_init_insn(auprobe, insn, false);
-}
#endif /* CONFIG_X86_64 */
struct uprobe_xol_ops {
@@ -614,7 +612,7 @@ int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm,
bool fix_ip = true, fix_call = false;
int ret;
- ret = validate_insn_bits(auprobe, mm, &insn);
+ ret = uprobe_init_insn(auprobe, &insn, is_64bit_mm(mm));
if (ret)
return ret;
--
1.5.5.1
next prev parent reply other threads:[~2014-04-19 17:02 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-17 20:02 [GIT PULL] uprobes: fix the handling of relative jmp/call's Oleg Nesterov
2014-04-18 8:35 ` Ingo Molnar
2014-04-19 17:01 ` [PATCH 0/5] uprobes/x86: cleanup validate_insn_* paths, fix X86_X32 case Oleg Nesterov
2014-04-19 17:01 ` [PATCH 1/5] uprobes/x86: Add uprobe_init_insn(), kill validate_insn_{32,64}bits() Oleg Nesterov
2014-04-29 10:04 ` Srikar Dronamraju
2014-04-19 17:01 ` Oleg Nesterov [this message]
2014-04-29 10:05 ` [PATCH 2/5] uprobes/x86: Add is_64bit_mm(), kill validate_insn_bits() Srikar Dronamraju
2014-04-19 17:01 ` [PATCH 3/5] uprobes/x86: Shift "insn_complete" from branch_setup_xol_ops() to uprobe_init_insn() Oleg Nesterov
2014-04-29 10:05 ` Srikar Dronamraju
2014-04-19 17:01 ` [PATCH 4/5] uprobes/x86: Make good_insns_* depend on CONFIG_X86_* Oleg Nesterov
2014-04-29 10:06 ` Srikar Dronamraju
2014-04-19 17:02 ` [PATCH 5/5] uprobes/x86: Fix is_64bit_mm() with CONFIG_X86_X32 Oleg Nesterov
2014-04-29 10:06 ` Srikar Dronamraju
2014-04-24 21:36 ` [PATCH 0/5] uprobes/x86: cleanup validate_insn_* paths, fix X86_X32 case Jim Keniston
2014-04-22 14:47 ` [PATCH 0/5] uprobes/x86: completely untangle branch_xol_ops and default_xol_ops Oleg Nesterov
2014-04-22 14:47 ` [PATCH 1/5] uprobes/x86: Don't change the task's state if ->pre_xol() fails Oleg Nesterov
2014-04-22 14:47 ` [PATCH 2/5] uprobes/x86: Introduce uprobe_xol_ops->abort() and default_abort_op() Oleg Nesterov
2014-04-22 14:47 ` [PATCH 3/5] uprobes/x86: Don't use arch_uprobe_abort_xol() in arch_uprobe_post_xol() Oleg Nesterov
2014-04-22 14:47 ` [PATCH 4/5] uprobes/x86: Move UPROBE_FIX_SETF logic from arch_uprobe_post_xol() to default_post_xol_op() Oleg Nesterov
2014-04-22 14:47 ` [PATCH 5/5] uprobes/x86: Move default_xol_ops's data into arch_uprobe->def Oleg Nesterov
2014-04-24 23:30 ` Jim Keniston
2014-04-25 19:53 ` Oleg Nesterov
2014-04-25 17:47 ` [PATCH 0/4] uprobes/x86: UPROBE_FIX_IP/UPROBE_FIX_CALL cleanups Oleg Nesterov
2014-04-25 17:47 ` [PATCH 1/4] uprobes/x86: Cleanup the usage of arch_uprobe->def.fixups, make it u8 Oleg Nesterov
2014-04-25 17:47 ` [PATCH 2/4] uprobes/x86: Introduce push_ret_address() Oleg Nesterov
2014-04-25 17:47 ` [PATCH 3/4] uprobes/x86: Kill adjust_ret_addr(), simplify UPROBE_FIX_CALL logic Oleg Nesterov
2014-04-25 17:47 ` [PATCH 4/4] uprobes/x86: Cleanup the usage of UPROBE_FIX_IP/UPROBE_FIX_CALL Oleg Nesterov
2014-04-27 13:51 ` [PATCH 0/4] uprobes/x86: UPROBE_FIX_IP/UPROBE_FIX_CALL cleanups Oleg Nesterov
2014-04-27 16:52 ` [PATCH 0/3] uprobes/x86: cleanup "riprel" functions Oleg Nesterov
2014-04-27 16:52 ` [PATCH 1/3] uprobes/x86: Rename *riprel* helpers to make the naming consistent Oleg Nesterov
2014-04-28 6:34 ` Srikar Dronamraju
2014-05-01 0:07 ` Jim Keniston
2014-04-27 16:52 ` [PATCH 2/3] uprobes/x86: Kill the "autask" arg of riprel_pre_xol() Oleg Nesterov
2014-04-28 6:35 ` Srikar Dronamraju
2014-05-01 0:07 ` Jim Keniston
2014-04-27 16:52 ` [PATCH 3/3] uprobes/x86: Simplify riprel_{pre,post}_xol() and make them similar Oleg Nesterov
2014-04-28 6:36 ` Srikar Dronamraju
2014-05-01 0:08 ` Jim Keniston
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140419170151.GA30857@redhat.com \
--to=oleg@redhat.com \
--cc=aarapov@redhat.com \
--cc=ananth@in.ibm.com \
--cc=dave.long@linaro.org \
--cc=dvlasenk@redhat.com \
--cc=fche@redhat.com \
--cc=hpa@zytor.com \
--cc=jkenisto@us.ibm.com \
--cc=jlebon@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=mingo@elte.hu \
--cc=srikar@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).