Re: [PATCH v5 0/5] Add USB nodes for am43xx epos and gp evm

[Tony Lindgren <tony@atomide.com>]

* George Cherian <george.cherian@ti.com> [140505 01:04]:
> Hi Benoit,
> 
> On 4/25/2014 9:49 PM, Felipe Balbi wrote:
> >On Wed, Mar 19, 2014 at 03:39:58PM +0530, George Cherian wrote:
> >>The patch series adds USB dt nodes for am43xx epos and gp evm
> >>Boot tested with linux-next + Tony's omap-for-v3.15/dt
> >>
> >>Changes from v1 -> v2
> >>	* Reorder "doc: Add "ti,am437x-dwc3" comaptible for dwc3 glue"
> >>	* Address v1 coments on "ARM: dts: AM4372: Add USB nodes"
> >>
> >>Changes from v2 -> v3
> >>	* Removed unwanted dwc3_1 and dwc3_2 nodes from am437x-gp-evm.dts
> >>	  and am43x-epos-evm.dts
> >>
> >>Changes from v3 -> v4
> >>	* Refreshed on top of Tony's omap-for-v3.15/dt tree
> >>	* Added usb_phy0_always_on_clk32k and usb_phy1_always_on_clk32k Patch 2
> >>	* Used the above clocks in Patch 3
> >>	* Patch 4 and 5 edited the unwanted portions of commit log
> >>
> >>Changes from v4 -> v5
> >>	* Address Roger's comment for the clock data
> >>
> >>George Cherian (5):
> >>   doc: Add "ti,am437x-dwc3" comaptible for dwc3 glue
> >>   ARM: dts: am43xx clock data
> >>   ARM: dts: AM4372: Add USB nodes
> >>   ARM: dts: am437x-gp-evm: Enable USB
> >>   ARM: dts: am43x-epos-evm: Enable USB
> >>
> >>  Documentation/devicetree/bindings/usb/omap-usb.txt |  4 +-
> >>  arch/arm/boot/dts/am4372.dtsi                      | 94 ++++++++++++++++++++++
> >>  arch/arm/boot/dts/am437x-gp-evm.dts                | 18 +++++
> >>  arch/arm/boot/dts/am43x-epos-evm.dts               | 18 +++++
> >>  arch/arm/boot/dts/am43xx-clocks.dtsi               | 32 ++++++++
> >>  5 files changed, 165 insertions(+), 1 deletion(-)
> >Is this applied anywhere yet ? Benoit, are you taking this for v3.16
> >merge window ?
> >
> Ping on this series.

Applying these into omap-for-v3.16/dt as I'm applying patches today.

Regards,

Tony