From: Ingo Molnar <mingo@kernel.org>
To: Richard Weinberger <richard.weinberger@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH/RFC] Deprecate BUG/BUG_ON in favour of BUG_AND_HALT/BUG_AND_HALT_ON
Date: Tue, 6 May 2014 09:35:00 +0200 [thread overview]
Message-ID: <20140506073500.GA26303@gmail.com> (raw)
In-Reply-To: <CAFLxGvzhd6jwGsu9eOBtXu92JcH1PnZsR9EB_h5LihYRNS-hyQ@mail.gmail.com>
* Richard Weinberger <richard.weinberger@gmail.com> wrote:
> On Wed, Apr 30, 2014 at 5:03 PM, Paul Gortmaker
> <paul.gortmaker@windriver.com> wrote:
> > A long standing problem for us has been the misuse of BUG/BUG_ON.
> > The typical misuse is someone only thinking of what represents
> > a bug in their local code, and especially for people relatively
> > new to Linux, starting out in device drivers, the appeal of using
> > BUG w/o knowing what it really does is too great.
> >
> > So you end up with some trivial non system critical driver bringing
> > the whole system to a grinding halt just because it detected an
> > internal inconsistency. That just makes users unhappy and looks bad.
> >
> > It is hopeless to think we can reclaim BUG/BUG_ON for their original
> > intent, given there are currently ~20k instances. To make progress
> > here, we create BUG_AND_HALT variants, which leave no doubt as to
> > what they do in name alone.
> >
> > Then we can incrementally move the real BUG users (unrecoverable
> > filesystem corruption, page table mangling, etc) onto BUG_AND_HALT,
> > and finally at some time in the future we'll simply make the old
> > BUG/BUG_ON be aliases for WARN/WARN_ON, once we've moved over the
> > bulk of the instances really needing to halt the system.
> >
> > Suggested-by: Ingo Molnar <mingo@kernel.org>
> > Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
> > ---
> >
> > [This might not be a unique idea; but I'm pretty sure I'd first
> > heard of it during a discussion with Ingo at RT summit last year.]
> >
> > include/asm-generic/bug.h | 16 ++++++++++++++++
> > scripts/checkpatch.pl | 7 +++++++
> > 2 files changed, 23 insertions(+)
> >
> > diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
> > index 630dd2372238..57b79a394ceb 100644
> > --- a/include/asm-generic/bug.h
> > +++ b/include/asm-generic/bug.h
> > @@ -43,6 +43,14 @@ struct bug_entry {
> > * If you're tempted to BUG(), think again: is completely giving up
> > * really the *only* solution? There are usually better options, where
> > * users don't need to reboot ASAP and can mostly shut down cleanly.
> > + *
> > + * Sadly nobody listens to the above, and trying to reclaim BUG/BUG_ON
> > + * for their original intent is about as hopeful as wishing "selfie"
> > + * wasn't headed for the OED. So the plan is to avoid BUG/BUG_ON
> > + * entirely. Either use WARN/WARN_ON or BUG_AND_HALT/BUG_AND_HALT_ON.
> > + * Once the critical (e.g. fs etc) BUG/BUG_ON users are updated to use
> > + * the clearly named HALT variants, we can point the old BUG/BUG_ON
> > + * defines below to be clones of the less drastic WARN variants.
> > */
> > #ifndef HAVE_ARCH_BUG
> > #define BUG() do { \
> > @@ -51,10 +59,18 @@ struct bug_entry {
> > } while (0)
> > #endif
> >
> > +#ifndef HAVE_ARCH_BUG_AND_HALT
> > +#define BUG_AND_HALT BUG
> > +#endif
> > +
> > #ifndef HAVE_ARCH_BUG_ON
> > #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0)
> > #endif
> >
> > +#ifndef HAVE_ARCH_BUG_AND_HALT_ON
> > +#define BUG_AND_HALT_ON BUG_ON
> > +#endif
> > +
> > /*
> > * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report
> > * significant issues that need prompt attention if they should ever
> > diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
> > index 34eb2160489d..3cbf3591cf76 100755
> > --- a/scripts/checkpatch.pl
> > +++ b/scripts/checkpatch.pl
> > @@ -2010,6 +2010,13 @@ sub process {
> > $rpt_cleaners = 1;
> > }
> >
> > +# Dont use BUG/BUG_ON; use WARN/WARN_ON or BUG_AND_HALT/BUG_AND_HALT_ON
> > + if ($rawline =~ /^\+.*BUG\(/ || $rawline =~ /^\+.*BUG_ON\(/) {
> > + my $herevet = "$here\n" . cat_vet($rawline) . "\n";
> > + WARN("BUG/BUG_ON",
> > + "Use of BUG/BUG_ON is deprecated. Use WARN/WARN_ON or BUG_AND_HALT/BUG_AND_HALT_ON\n" . $herevet);
> > + }
> > +
> > # Check for FSF mailing addresses.
> > if ($rawline =~ /\bwrite to the Free/i ||
> > $rawline =~ /\b59\s+Temple\s+Pl/i ||
> > --
>
> I like the idea but not the name.
> What about DIE() and DIE_ON()?
CRASH_ON() might be a suggestive name as well, as from the user's
point of view we are crashing her system.
Thanks,
Ingo
next prev parent reply other threads:[~2014-05-06 7:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-30 15:03 [PATCH/RFC] Deprecate BUG/BUG_ON in favour of BUG_AND_HALT/BUG_AND_HALT_ON Paul Gortmaker
2014-05-03 18:33 ` Richard Weinberger
2014-05-06 7:35 ` Ingo Molnar [this message]
2014-05-06 8:08 ` Richard Weinberger
2014-05-06 9:35 ` Ingo Molnar
2014-05-06 9:41 ` Richard Weinberger
2014-05-06 14:35 ` Paul Gortmaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140506073500.GA26303@gmail.com \
--to=mingo@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=paul.gortmaker@windriver.com \
--cc=richard.weinberger@gmail.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox