From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: linux-arm-kernel@lists.infradead.org,
Boris BREZILLON <boris.brezillon@free-electrons.com>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
linux-kernel@vger.kernel.org, Bo Shen <voice.shen@atmel.com>
Subject: Re: [PATCH v2 1/2] ARM: at91: add PWM pinctrl to SAMA5D3
Date: Mon, 12 May 2014 11:48:36 +0200 [thread overview]
Message-ID: <20140512094835.GB29318@piout.net> (raw)
In-Reply-To: <1399887854-12612-1-git-send-email-nicolas.ferre@atmel.com>
On 12/05/2014 at 11:44:14 +0200, Nicolas Ferre wrote :
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> v1 -> v2: - removed useless comment part, kept the "conflicts with..." part
> - grouped "high" and "low" signal definitions together for each
> channel
>
> arch/arm/boot/dts/sama5d3.dtsi | 78 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
> index 9caa06b3641e..e08da17e1890 100644
> --- a/arch/arm/boot/dts/sama5d3.dtsi
> +++ b/arch/arm/boot/dts/sama5d3.dtsi
> @@ -583,6 +583,84 @@
> };
> };
>
> + pwm0 {
> + pinctrl_pwm0_pwmh0_0: pwm0_pwmh0-0 {
> + atmel,pins =
> + <AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D4 and LCDDAT20 */
> + };
> + pinctrl_pwm0_pwmh0_1: pwm0_pwmh0-1 {
> + atmel,pins =
> + <AT91_PIOB 0 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX0 */
> + };
> + pinctrl_pwm0_pwml0_0: pwm0_pwml0-0 {
> + atmel,pins =
> + <AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D5 and LCDDAT21 */
> + };
> + pinctrl_pwm0_pwml0_1: pwm0_pwml0-1 {
> + atmel,pins =
> + <AT91_PIOB 1 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTX1 */
> + };
> +
> + pinctrl_pwm0_pwmh1_0: pwm0_pwmh1-0 {
> + atmel,pins =
> + <AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D6 and LCDDAT22 */
> + };
> + pinctrl_pwm0_pwmh1_1: pwm0_pwmh1-1 {
> + atmel,pins =
> + <AT91_PIOB 4 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX0 */
> + };
> + pinctrl_pwm0_pwmh1_2: pwm0_pwmh1-2 {
> + atmel,pins =
> + <AT91_PIOB 27 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with G125CKO and RTS1 */
> + };
> + pinctrl_pwm0_pwml1_0: pwm0_pwml1-0 {
> + atmel,pins =
> + <AT91_PIOA 23 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with ISI_D7 and LCDDAT23 */
> + };
> + pinctrl_pwm0_pwml1_1: pwm0_pwml1-1 {
> + atmel,pins =
> + <AT91_PIOB 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRX1 */
> + };
> + pinctrl_pwm0_pwml1_2: pwm0_pwml1-2 {
> + atmel,pins =
> + <AT91_PIOE 31 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with IRQ */
> + };
> +
> + pinctrl_pwm0_pwmh2_0: pwm0_pwmh2-0 {
> + atmel,pins =
> + <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXCK */
> + };
> + pinctrl_pwm0_pwmh2_1: pwm0_pwmh2-1 {
> + atmel,pins =
> + <AT91_PIOD 5 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA4 and TIOA0 */
> + };
> + pinctrl_pwm0_pwml2_0: pwm0_pwml2-0 {
> + atmel,pins =
> + <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GTXEN */
> + };
> + pinctrl_pwm0_pwml2_1: pwm0_pwml2-1 {
> + atmel,pins =
> + <AT91_PIOD 6 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA5 and TIOB0 */
> + };
> +
> + pinctrl_pwm0_pwmh3_0: pwm0_pwmh3-0 {
> + atmel,pins =
> + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXDV */
> + };
> + pinctrl_pwm0_pwmh3_1: pwm0_pwmh3-1 {
> + atmel,pins =
> + <AT91_PIOD 7 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA6 and TCLK0 */
> + };
> + pinctrl_pwm0_pwml3_0: pwm0_pwml3-0 {
> + atmel,pins =
> + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* conflicts with GRXER */
> + };
> + pinctrl_pwm0_pwml3_1: pwm0_pwml3-1 {
> + atmel,pins =
> + <AT91_PIOD 8 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* conflicts with MCI0_DA7 */
> + };
> + };
> +
> spi0 {
> pinctrl_spi0: spi0-0 {
> atmel,pins =
> --
> 1.8.2.2
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
prev parent reply other threads:[~2014-05-12 9:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-09 13:44 [PATCH 1/2] ARM: at91: add PWM pinctrl to SAMA5D3 Nicolas Ferre
2014-05-09 13:44 ` [PATCH 2/2] ARM: at91: add 2 PWM outputs to SAMA5D3 Xplained Nicolas Ferre
2014-05-10 9:10 ` [PATCH 1/2] ARM: at91: add PWM pinctrl to SAMA5D3 Alexandre Belloni
2014-05-12 9:06 ` Nicolas Ferre
2014-05-12 9:08 ` Alexandre Belloni
2014-05-12 9:44 ` [PATCH v2 " Nicolas Ferre
2014-05-12 9:48 ` Alexandre Belloni [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140512094835.GB29318@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox