Re: [PATCH v3 3/7] mfd: add support for sun6i PRCM (Power/Reset/Clock Management) unit

Boris BREZILLON
2014-05-09T14:01:22Z

On 09/05/2014 15:52, Lee Jones wrote:
>> The PRCM (Power/Reset/Clock Management) block exposes several subdevices
>> in different subsystems (clk, reset ...)
>>
>> Add basic support for the PRCM unit with clk (AR100, AHB0, and APB0 clks)
>> and reset controller subdevices.
>>
>> Other subdevices might be added later (if needed).
>>
>> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
>> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>> ---
>> drivers/mfd/Kconfig | 8 +++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/sun6i-prcm.c | 134 +++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 143 insertions(+)
>> create mode 100644 drivers/mfd/sun6i-prcm.c
> [...]
>
>> +/*
>> + * Copyright (C) 2014 Free Electrons
>> + *
>> + * License Terms: GNU General Public License v2
>> + * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
>> + *
>> + * Allwinner PRCM (Power/Reset/Clock Management) driver
>> + *
>> + */
>> +
>> +#include <linux/mfd/core.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
> Ah, now isn't that better?

Absolutely :-).

> Acked-by: Lee Jones <lee.jones@linaro.org>
>

--
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering