From: "Pali Rohár" <pali.rohar@gmail.com>
To: Jean Delvare <jdelvare@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>, linux-kernel@vger.kernel.org
Subject: Re: Dell Latitude E6440 & i8k
Date: Fri, 16 May 2014 21:23:02 +0200 [thread overview]
Message-ID: <201405162123.02112@pali> (raw)
In-Reply-To: <20140516211117.0c766287@endymion.delvare>
[-- Attachment #1: Type: Text/Plain, Size: 2347 bytes --]
On Friday 16 May 2014 21:11:17 Jean Delvare wrote:
> Hi Pali,
>
> On Fri, 16 May 2014 20:37:41 +0200, Pali Rohár wrote:
> > Hello,
> >
> > on Dell Latitude E6440 driver i8k reporting total nonsense
> > values
>
> That's kind of excessive wording, the output isn't that bad.
>
I mean fan RPM & temp4. Those are for sure incorrect.
> > $ sensors
> > i8k-virtual-0
> > Adapter: Virtual device
> > Right Fan: 93450 RPM
> > CPU: +57.0°C
> > temp2: +57.0°C
> > temp3: +40.0°C
> > temp4: +127.0°C
> >
> > Right Fan and temp4 are for sure incorrect.
>
> Driver is reverse-engineered so this is best effort and some
> tweaking may be needed.
>
Ok, if driver is developed without any documentation, then it
make sense that not working correctly on new machines...
So is not there any documentation? I think that Dell released
some SMM/BIOS code... But I'm not sure about it.
> > Value temp4 is always 127 and is never changing, but value
> > for Right Fan is increasing when fan is more noisy. So it
> > looks like value for Right Fan is not correctly normalized
> > or multiplier is incorrect.
> >
> > And name "Right" is incorrect too. Fan is on left side of
> > this notebook, not right as reported by driver.
> >
> > It is possible to fix these problems?
>
> Load the i8k driver with fan_mult=1.
>
Looks like now it reports more plausible value for fan. When fan
is at low it reporting between 3000 - 3100 RPM.
> Add the following to /etc/sensors.d/i8k.conf:
>
> chip "i8k-virtual-0"
>
> label fan2 "Left Fan"
> ignore temp4
And this fixing output from sensors program.
$ sensors
i8k-virtual-0
Adapter: Virtual device
Left Fan: 3088 RPM
CPU: +54.0°C
temp2: +57.0°C
temp3: +40.0°C
But Right Fan name is still present in kernel sysfs:
$ grep "" /sys/class/hwmon/hwmon1/*
/sys/class/hwmon/hwmon1/fan2_input:3091
/sys/class/hwmon/hwmon1/fan2_label:Right Fan
/sys/class/hwmon/hwmon1/name:i8k
/sys/class/hwmon/hwmon1/pwm2:128
/sys/class/hwmon/hwmon1/temp1_input:56000
/sys/class/hwmon/hwmon1/temp1_label:CPU
/sys/class/hwmon/hwmon1/temp2_input:57000
/sys/class/hwmon/hwmon1/temp3_input:40000
/sys/class/hwmon/hwmon1/temp4_input:127000
--
Pali Rohár
pali.rohar@gmail.com
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
next prev parent reply other threads:[~2014-05-16 19:23 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-16 18:37 Dell Latitude E6440 & i8k Pali Rohár
2014-05-16 19:11 ` Jean Delvare
2014-05-16 19:23 ` Pali Rohár [this message]
2014-05-17 9:44 ` Jean Delvare
2014-05-17 15:34 ` Guenter Roeck
2014-05-17 23:01 ` Pali Rohár
2014-05-18 8:23 ` Jean Delvare
2014-05-17 15:25 ` Guenter Roeck
2014-05-17 21:09 ` Jean Delvare
2014-05-17 22:18 ` Guenter Roeck
-- strict thread matches above, loose matches on Subject: below --
2014-05-17 22:54 Pali Rohár
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201405162123.02112@pali \
--to=pali.rohar@gmail.com \
--cc=jdelvare@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox