[PATCH 3.10 60/86] sctp: reset flowi4_oif parameter on route lookup

Greg Kroah-Hartman
2014-05-29T04:47:57Z

From: Xufeng Zhang <xufeng.zhang@windriver.com>

[ Upstream commit 85350871317a5adb35519d9dc6fc9e80809d42ad ]

commit 813b3b5db83 (ipv4: Use caller's on-stack flowi as-is
in output route lookups.) introduces another regression which
is very similar to the problem of commit e6b45241c (ipv4: reset
flowi parameters on route connect) wants to fix:
Before we call ip_route_output_key() in sctp_v4_get_dst() to
get a dst that matches a bind address as the source address,
we have already called this function previously and the flowi
parameters have been initialized including flowi4_oif, so when
we call this function again, the process in __ip_route_output_key()
will be different because of the setting of flowi4_oif, and we'll
get a networking device which corresponds to the inputted flowi4_oif
as the output device, this is wrong because we'll never hit this
place if the previously returned source address of dst match one
of the bound addresses.

To reproduce this problem, a vlan setting is enough:
# ifconfig eth0 up
# route del default
# vconfig add eth0 2
# vconfig add eth0 3
# ifconfig eth0.2 10.0.1.14 netmask 255.255.255.0
# route add default gw 10.0.1.254 dev eth0.2
# ifconfig eth0.3 10.0.0.14 netmask 255.255.255.0
# ip rule add from 10.0.0.14 table 4
# ip route add table 4 default via 10.0.0.254 src 10.0.0.14 dev eth0.3
# sctp_darn -H 10.0.0.14 -P 36422 -h 10.1.4.134 -p 36422 -s -I
You'll detect that all the flow are routed to eth0.2(10.0.1.254).

Signed-off-by: Xufeng Zhang <xufeng.zhang@windriver.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sctp/protocol.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)

--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -498,8 +498,13 @@ static void sctp_v4_get_dst(struct sctp_
continue;
if ((laddr->state == SCTP_ADDR_SRC) &&
(AF_INET == laddr->a.sa.sa_family)) {
- fl4->saddr = laddr->a.v4.sin_addr.s_addr;
fl4->fl4_sport = laddr->a.v4.sin_port;
+ flowi4_update_output(fl4,
+ asoc->base.sk->sk_bound_dev_if,
+ RT_CONN_FLAGS(asoc->base.sk),
+ daddr->v4.sin_addr.s_addr,
+ laddr->a.v4.sin_addr.s_addr);
+
rt = ip_route_output_key(sock_net(sk), fl4);
if (!IS_ERR(rt)) {
dst = &rt->dst;