Re: [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

Re: [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Luis R. Rodriguez]

[-- Attachment #1: Type: text/plain, Size: 10233 bytes --]

I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
in particular that of a launcher idea on system to replace alternatives on the
ExecStart= line of a systemd service unit file, alternative ideas are of
course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
a little while ago with nothing concrete being recommended but instead a few
options being now archived as possibilities. I'm looking for a bit wider
review of the approaches and recomendations.

Some general background for non xen folks: old xen requires the launch of
a daemon which implements supports of the xenstore, which is the database
that xen uses for information about guests / dom0. There are two supported
daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
same thing. Right now old init lets you override which one you pick through
an environment variable on /etc/{sysconfig,default}/xencommons, the script
will use the appropriate on there. Systemd doesn't let you use variables on
the ExecStart line of a service unit file so alternatives are required.

The reason I'm being very careful here this could set a precedent and at
least for the launcher idea it'd require the usage of getenv() and execve(),
and secure alternatives for these (secure_getenv(), execve_nosecurity())
have either been merged or suggested before for Linux. The systemd discussion
is only specific to Linux but if we have a launcher we could consider it for
other supported OSes. All that said I'd like proper review of the security
implications of *all* strategies but obviously in particular the launcher
idea. I want to tread carefuly before setting precedents.

Details below as we discuss the approach we can take on Xen.

On Wed, May 28, 2014 at 10:30:49AM +0100, Ian Campbell wrote:
> On Sat, 2014-05-24 at 01:20 +0200, Luis R. Rodriguez wrote:
> > On Thu, May 22, 2014 at 11:05:47AM +0100, Ian Campbell wrote:
> > > On Thu, 2014-05-22 at 01:02 +0200, Luis R. Rodriguez wrote:
> > > > > It might be reasonable for hotplugpath.sh to define
> > > > > XENSTORE_xenstored=/path/to/xenstored
> > > > > XENSTORE_oxenstored=/path/to/oxenstored
> > > > > 
> > > > > and use the existing XENSTORED variable in sysconfig to select which.
> > > > 
> > > > Ah but but hotplugpath.sh is one of those automatically generated files
> > > > and after my last patch in this series they are all now shared in one
> > > > master file, config/xen-environment-scripts.in, and since the we want
> > > > to keep script file Shell / Python agnostic checking which one is set
> > > > on sysconfig is not something reasonable to do on that master file.
> > > 
> > > Well, it must be possible to change which xenstored implementation is
> > > used by editing a single setting in /etc/{sysconfig,default}/xencommons,
> > > maybe that means more code somewhere, I don't know. idieally you would
> > > be able to say
> > > XENSTORE=xenstored # C xenstore at default path
> > > XENSTORE=oxenstored # Ocaml xenstore at default path
> > > XENSTORE=/path/to/something # xenstored at some custom path.
> > 
> > Agreed.
> > 
> > > > My series of patches already deals with the old init and xencommons script to
> > > > start xenstore, it used the hotplugpath.sh for deducing the xenstore
> > > > daemon it should use by default and switching this to rely on the sysconfig
> > > > xencommons should be easy if it wasn't already dealt with there already.
> > > > 
> > > > For systemd though we can't use varibles on ExecStart for the process, we
> > > > however can use environment variables. We have a few options. Fedora's
> > > > approach was to use two service unit files which conflicted with each other,
> > > > although I'm sure we can work it out by using a target unit and let folks
> > > > flip it seems rather silly to me to maintain two service unit files with
> > > > identical entries. Therefore in my new approach usres would have to manually
> > > > edit the service file with the differnt path / binary. Another possibility
> > > > is to have a central launcher binary that just does getenv() and execve()
> > > > on the desired binary. If this is agreeable I can work on it and it could
> > > > even be shared by the old init as well.
> > > 
> > > Which is considered the most "systemd" approach?
> > 
> > Systemd tries to even recommend to shy away from sysconfig/default directory for
> > stashing entries, one can set environment variables within the service unit itself,
> > but if we are to maintain compatiblity with old stuff relying on sysconfig seems
> > the reasonable and accepted way, then we'd include that file as part of the
> > running environment, just as our systemd service unit files do now in this series.
> 
> I'm mostly concerned that people *not* using systemd can continue to
> use /etc/{default,sysconfig}/xencommons in the way which they are used
> to.

Ah well that is already addressed in the series of patches, I'll be sure to test
flipping it with the xencommons edit on my next respin. I think in my series
the xenstored variable was assumed coming from hotplug.sh and obviously we
just want /etc/{default,sysconfig}/xencommons as expressed I just had missed
that file.

> For people who are using systemd the question is whether it is more or
> less confusing to have an unused /etc/{default,sysconfig}/xencommons
> sitting there vs. doing things in the less "systemd" way. The compromise
> is perhaps to seed the defaults from /e/{d,s}/xencommons but allow them
> to be changed in either that file or in the unit file? Is that possible?

Environment variables cannot be used to replace the binary that systemd will
execute on the ExecStart= line and this is why I mentioned the different
possiblities available. As it stands right now then folks would have to edit
the xenstored.service file and replace the full path of the binary to get
a different xenstore to run, and then and reboot, right now on systemd the file
/e/{d,s}/xencommons could only be used to get daemon environment variables,
not change the daemon. If we can live with that as a compromise in
documentation then that would require only an edit to the file
/e/{d,s}/xencommons and make sure its clear that the daemon override would
only work on legacy init and not systemd. That's another option then, so to
be clear there are these known options:

  0) *Iff* we want to loose the /e/{d,s}/xencommons behavior we just document
     that the /e/{d,s}/xencommons override is only for legacy init and have
     folks edit the service file to change the preferred daemon. They'd
     obviously just have to reboot.

*Iff* we want to conserve the /e/{d,s}/xencommons behaviour we have a few options:

  1) two service unit files and one target file, the downside is that the service
     files are identical except for the ExecStart line, that seems silly then
     as you'd have to maintain two files or at least once installed they'd be
     nearly identical.
  2) two service unit files and use an alias for the general service name,
     the same downside applies though.
  3) we implement a launcher which will getenv() and execve() the appropriate
     daemon. To do this we can rename the C implementation to cxenstored,
     the Ocaml daemon remain as oxenstored, and the launcher would get
     the generic name xenstored. Although I had not mentioned before I am
     making it clear now that I'd like a bit more review on this strategy
     and the reasons for it.

Options 1-2 would require no changes to other OSes. Option 3 however could
be considered for integration on other OSes. When evaluating these options
please note that any security issues with getenv() and execve() also have
to be considered in light of the current strategy for legacy init which
would rely on an environment file which allows full override on the binary.

> > More details here:
> > 
> > http://0pointer.de/blog/projects/on-etc-sysinit.html
> > 
> > As for dynamic use daemons, there aren't good examples but the undocumented way
> > of doing this but as a per a conversation at the LF Linux Collaboration summit
> > one way to deal with this is to use one service target files for defining what
> > we do, we'd have two separate service unit files for each cxenstored and
> > oxenstored, the services that need to depend on it would depend on the target,
> > not the actual service unit files, the user then would have to enable one or
> > the other. A sysconfig edit however would not trigger a change, which is what
> > we seem to want,
> 
> What do you mean? I don't expect editing sysconfig will automagically do
> anything, some further action would be required, and since xenstored is
> involved that further action most likely involves a reboot.

Sorry dynamic was the wrong word, what I meant was a way that would not require
a service unit change but rather an environment file much as with the legacy init
approach.

> Can a systemd unit "soft fail"? i.e. fail but not make a huge red
> highlighted fuss about it?

Not that I have seen documented.

> Then each of the two units could check if
> they were configured and softfail if not (expecting that the other one
> is configured). Alternatively perhaps there is some sort of pre-check
> hook which could be used to see if the unit can/should be run?

Option 1) and 2) can be used for something like this if we did not want
to have a system administrator ever involved in selectin between the two
units, but it would then require adding code on both C version of xentored
and on the ocaml oxenstored to getenv() on XENSTORED and fail to load if
it didn't match. I am not sure if two service units that claim the same
alias (option 2) would work well in a situation where one is expected
to fail though. Likewise for the target (option 1). Seems a bit hacky,
but then again so do all of these options and hence the wide review.

IMHO the launcher is the cleanest solution and my preferred strategy
provided of course all possible security concerns and any other concenrs
check out well.

  Luis

[-- Attachment #2: Type: application/pgp-signature, Size: 835 bytes --]

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Lennart Poettering]

On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:

> I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
> in particular that of a launcher idea on system to replace alternatives on the
> ExecStart= line of a systemd service unit file, alternative ideas are of
> course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
> a little while ago with nothing concrete being recommended but instead a few
> options being now archived as possibilities. I'm looking for a bit wider
> review of the approaches and recomendations.
> 
> Some general background for non xen folks: old xen requires the launch of
> a daemon which implements supports of the xenstore, which is the database
> that xen uses for information about guests / dom0. There are two supported
> daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
> same thing. Right now old init lets you override which one you pick through
> an environment variable on /etc/{sysconfig,default}/xencommons, the script
> will use the appropriate on there. Systemd doesn't let you use variables on
> the ExecStart line of a service unit file so alternatives are required.
> 
> The reason I'm being very careful here this could set a precedent and at
> least for the launcher idea it'd require the usage of getenv() and execve(),
> and secure alternatives for these (secure_getenv(), execve_nosecurity())
> have either been merged or suggested before for Linux. The systemd discussion
> is only specific to Linux but if we have a launcher we could consider it for
> other supported OSes. All that said I'd like proper review of the security
> implications of *all* strategies but obviously in particular the launcher
> idea. I want to tread carefuly before setting precedents.

You can also just invoke a shell script from ExecStart=. I mean, we try
to deemphesize them in the boot process, but there's nothing wrong with
using shell, if you need to parse shell configuraiton fragments and just
want to execute on ot another program...

That said, I'd certainly make a clean cut and drop support for
/etc/sysconfig from any project I see, earlier rather than later, since
it's just cruft, a bad idea and should really just go away. But then
again, I would also just not do the thing with supporting two
implementations at the same time... 

Lennart

-- 
Lennart Poettering, Red Hat

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Luis R. Rodriguez]

[-- Attachment #1: Type: text/plain, Size: 3297 bytes --]

On Sun, Jun 01, 2014 at 08:15:47AM +0200, Lennart Poettering wrote:
> On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:
> 
> > I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
> > in particular that of a launcher idea on system to replace alternatives on the
> > ExecStart= line of a systemd service unit file, alternative ideas are of
> > course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
> > a little while ago with nothing concrete being recommended but instead a few
> > options being now archived as possibilities. I'm looking for a bit wider
> > review of the approaches and recomendations.
> > 
> > Some general background for non xen folks: old xen requires the launch of
> > a daemon which implements supports of the xenstore, which is the database
> > that xen uses for information about guests / dom0. There are two supported
> > daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
> > same thing. Right now old init lets you override which one you pick through
> > an environment variable on /etc/{sysconfig,default}/xencommons, the script
> > will use the appropriate on there. Systemd doesn't let you use variables on
> > the ExecStart line of a service unit file so alternatives are required.
> > 
> > The reason I'm being very careful here this could set a precedent and at
> > least for the launcher idea it'd require the usage of getenv() and execve(),
> > and secure alternatives for these (secure_getenv(), execve_nosecurity())
> > have either been merged or suggested before for Linux. The systemd discussion
> > is only specific to Linux but if we have a launcher we could consider it for
> > other supported OSes. All that said I'd like proper review of the security
> > implications of *all* strategies but obviously in particular the launcher
> > idea. I want to tread carefuly before setting precedents.
> 
> You can also just invoke a shell script from ExecStart=. I mean, we try
> to deemphesize them in the boot process, but there's nothing wrong with
> using shell, if you need to parse shell configuraiton fragments and just
> want to execute on ot another program...

I tried this and it didn't work given that systemd expects sd_notify()
to be called from the parent process, in this case the shell script.

Anyway -- time has passed folks and we need to pick something, I really
rather not spend any more time on this series unless a decision is made.
My preference stands as the launcher with getenv() and execve() but I
have also listed all other options available. Please feel free to pick
one but just let me know.

> That said, I'd certainly make a clean cut and drop support for
> /etc/sysconfig from any project I see, earlier rather than later, since
> it's just cruft, a bad idea and should really just go away.

We can use for example something like:

# The RPM way
EnvironmentFile=-/etc/sysconfig/xencommons
# The Debian way
EnvironmentFile=-/etc/default/xencommons
Environment=XENSTORED=oxenstored

And with time this lets us with time get rid of EnvironmentFile.

> But then
> again, I would also just not do the thing with supporting two
> implementations at the same time... 

:)

  Luis

[-- Attachment #2: Type: application/pgp-signature, Size: 835 bytes --]

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Cameron Norman]

On Wed, Jun 4, 2014 at 5:31 PM, Luis R. Rodriguez <mcgrof@suse.com> wrote:
> On Sun, Jun 01, 2014 at 08:15:47AM +0200, Lennart Poettering wrote:
>> On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:
>>
>> > I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
>> > in particular that of a launcher idea on system to replace alternatives on the
>> > ExecStart= line of a systemd service unit file, alternative ideas are of
>> > course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
>> > a little while ago with nothing concrete being recommended but instead a few
>> > options being now archived as possibilities. I'm looking for a bit wider
>> > review of the approaches and recomendations.
>> >
>> > Some general background for non xen folks: old xen requires the launch of
>> > a daemon which implements supports of the xenstore, which is the database
>> > that xen uses for information about guests / dom0. There are two supported
>> > daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
>> > same thing. Right now old init lets you override which one you pick through
>> > an environment variable on /etc/{sysconfig,default}/xencommons, the script
>> > will use the appropriate on there. Systemd doesn't let you use variables on
>> > the ExecStart line of a service unit file so alternatives are required.
>> >
>> > The reason I'm being very careful here this could set a precedent and at
>> > least for the launcher idea it'd require the usage of getenv() and execve(),
>> > and secure alternatives for these (secure_getenv(), execve_nosecurity())
>> > have either been merged or suggested before for Linux. The systemd discussion
>> > is only specific to Linux but if we have a launcher we could consider it for
>> > other supported OSes. All that said I'd like proper review of the security
>> > implications of *all* strategies but obviously in particular the launcher
>> > idea. I want to tread carefuly before setting precedents.
>>
>> You can also just invoke a shell script from ExecStart=. I mean, we try
>> to deemphesize them in the boot process, but there's nothing wrong with
>> using shell, if you need to parse shell configuraiton fragments and just
>> want to execute on ot another program...
>
> I tried this and it didn't work given that systemd expects sd_notify()
> to be called from the parent process, in this case the shell script.

Just use exec before the daemon command. I am pretty certain it can be
just like this:

    ExecStart=/bin/sh -c "exec $XENSTORED"

xenstored then has the same PID as the sh process, and $NOTIFY_SOCKET
works just fine.

Best,
--
Cameron

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Luis R. Rodriguez]

On Wed, Jun 04, 2014 at 07:52:56PM -0700, Cameron Norman wrote:
> On Wed, Jun 4, 2014 at 5:31 PM, Luis R. Rodriguez <mcgrof@suse.com> wrote:
> > On Sun, Jun 01, 2014 at 08:15:47AM +0200, Lennart Poettering wrote:
> >> On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:
> >>
> >> > I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
> >> > in particular that of a launcher idea on system to replace alternatives on the
> >> > ExecStart= line of a systemd service unit file, alternative ideas are of
> >> > course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
> >> > a little while ago with nothing concrete being recommended but instead a few
> >> > options being now archived as possibilities. I'm looking for a bit wider
> >> > review of the approaches and recomendations.
> >> >
> >> > Some general background for non xen folks: old xen requires the launch of
> >> > a daemon which implements supports of the xenstore, which is the database
> >> > that xen uses for information about guests / dom0. There are two supported
> >> > daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
> >> > same thing. Right now old init lets you override which one you pick through
> >> > an environment variable on /etc/{sysconfig,default}/xencommons, the script
> >> > will use the appropriate on there. Systemd doesn't let you use variables on
> >> > the ExecStart line of a service unit file so alternatives are required.
> >> >
> >> > The reason I'm being very careful here this could set a precedent and at
> >> > least for the launcher idea it'd require the usage of getenv() and execve(),
> >> > and secure alternatives for these (secure_getenv(), execve_nosecurity())
> >> > have either been merged or suggested before for Linux. The systemd discussion
> >> > is only specific to Linux but if we have a launcher we could consider it for
> >> > other supported OSes. All that said I'd like proper review of the security
> >> > implications of *all* strategies but obviously in particular the launcher
> >> > idea. I want to tread carefuly before setting precedents.
> >>
> >> You can also just invoke a shell script from ExecStart=. I mean, we try
> >> to deemphesize them in the boot process, but there's nothing wrong with
> >> using shell, if you need to parse shell configuraiton fragments and just
> >> want to execute on ot another program...
> >
> > I tried this and it didn't work given that systemd expects sd_notify()
> > to be called from the parent process, in this case the shell script.
> 
> Just use exec before the daemon command. I am pretty certain it can be
> just like this:
> 
>     ExecStart=/bin/sh -c "exec $XENSTORED"
> 
> xenstored then has the same PID as the sh process, and $NOTIFY_SOCKET
> works just fine.

Actually this does work on a test unit I just built. I'll proceed with
this approach since I haven't heard back from others and I think
this is the best approach now.

  Luis

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Lennart Poettering]

On Thu, 05.06.14 02:31, Luis R. Rodriguez (mcgrof@suse.com) wrote:

> On Sun, Jun 01, 2014 at 08:15:47AM +0200, Lennart Poettering wrote:
> > On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:
> > 
> > > I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
> > > in particular that of a launcher idea on system to replace alternatives on the
> > > ExecStart= line of a systemd service unit file, alternative ideas are of
> > > course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
> > > a little while ago with nothing concrete being recommended but instead a few
> > > options being now archived as possibilities. I'm looking for a bit wider
> > > review of the approaches and recomendations.
> > > 
> > > Some general background for non xen folks: old xen requires the launch of
> > > a daemon which implements supports of the xenstore, which is the database
> > > that xen uses for information about guests / dom0. There are two supported
> > > daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
> > > same thing. Right now old init lets you override which one you pick through
> > > an environment variable on /etc/{sysconfig,default}/xencommons, the script
> > > will use the appropriate on there. Systemd doesn't let you use variables on
> > > the ExecStart line of a service unit file so alternatives are required.
> > > 
> > > The reason I'm being very careful here this could set a precedent and at
> > > least for the launcher idea it'd require the usage of getenv() and execve(),
> > > and secure alternatives for these (secure_getenv(), execve_nosecurity())
> > > have either been merged or suggested before for Linux. The systemd discussion
> > > is only specific to Linux but if we have a launcher we could consider it for
> > > other supported OSes. All that said I'd like proper review of the security
> > > implications of *all* strategies but obviously in particular the launcher
> > > idea. I want to tread carefuly before setting precedents.
> > 
> > You can also just invoke a shell script from ExecStart=. I mean, we try
> > to deemphesize them in the boot process, but there's nothing wrong with
> > using shell, if you need to parse shell configuraiton fragments and just
> > want to execute on ot another program...
> 
> I tried this and it didn't work given that systemd expects sd_notify()
> to be called from the parent process, in this case the shell script.

Hmm? You should "exec" the real daemon binary at the end, not just fork
it off. That wait the shell script process is replaced by the daemon
binary, which is what you want.

Lennart

-- 
Lennart Poettering, Red Hat

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Luis R. Rodriguez]

On Thu, Jun 05, 2014 at 01:22:13PM +0200, Lennart Poettering wrote:
> On Thu, 05.06.14 02:31, Luis R. Rodriguez (mcgrof@suse.com) wrote:
> 
> > On Sun, Jun 01, 2014 at 08:15:47AM +0200, Lennart Poettering wrote:
> > > On Fri, 30.05.14 01:29, Luis R. Rodriguez (mcgrof@suse.com) wrote:
> > > 
> > > > I'm cc'ing a few security folks as I'd appreciate review on the ideas here,
> > > > in particular that of a launcher idea on system to replace alternatives on the
> > > > ExecStart= line of a systemd service unit file, alternative ideas are of
> > > > course welcomed. I'm also Cc'ing systemd-devel as this subject was reviewed
> > > > a little while ago with nothing concrete being recommended but instead a few
> > > > options being now archived as possibilities. I'm looking for a bit wider
> > > > review of the approaches and recomendations.
> > > > 
> > > > Some general background for non xen folks: old xen requires the launch of
> > > > a daemon which implements supports of the xenstore, which is the database
> > > > that xen uses for information about guests / dom0. There are two supported
> > > > daemons, xenstored (C version) and oxenstored (Ocaml version) but they do the
> > > > same thing. Right now old init lets you override which one you pick through
> > > > an environment variable on /etc/{sysconfig,default}/xencommons, the script
> > > > will use the appropriate on there. Systemd doesn't let you use variables on
> > > > the ExecStart line of a service unit file so alternatives are required.
> > > > 
> > > > The reason I'm being very careful here this could set a precedent and at
> > > > least for the launcher idea it'd require the usage of getenv() and execve(),
> > > > and secure alternatives for these (secure_getenv(), execve_nosecurity())
> > > > have either been merged or suggested before for Linux. The systemd discussion
> > > > is only specific to Linux but if we have a launcher we could consider it for
> > > > other supported OSes. All that said I'd like proper review of the security
> > > > implications of *all* strategies but obviously in particular the launcher
> > > > idea. I want to tread carefuly before setting precedents.
> > > 
> > > You can also just invoke a shell script from ExecStart=. I mean, we try
> > > to deemphesize them in the boot process, but there's nothing wrong with
> > > using shell, if you need to parse shell configuraiton fragments and just
> > > want to execute on ot another program...
> > 
> > I tried this and it didn't work given that systemd expects sd_notify()
> > to be called from the parent process, in this case the shell script.
> 
> Hmm? You should "exec" the real daemon binary at the end, not just fork
> it off. That wait the shell script process is replaced by the daemon
> binary, which is what you want.

I tried both just running it and also running exec foo; both presented
the same issue given that shell exec does not really execve.

  Luis

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Lennart Poettering]

On Thu, 05.06.14 20:01, Luis R. Rodriguez (mcgrof@suse.com) wrote:

> > Hmm? You should "exec" the real daemon binary at the end, not just fork
> > it off. That wait the shell script process is replaced by the daemon
> > binary, which is what you want.
> 
> I tried both just running it and also running exec foo; both presented
> the same issue given that shell exec does not really execve.

Hmmm? You shell's "exec" command doesn't actually execve()? What are you
using? This doesn't sound very accurate...

Lennart

-- 
Lennart Poettering, Red Hat

Re: [systemd-devel] [PATCH v5 12/14] autoconf: xen: enable explicit preference option for xenstored preference

[Andrew Lutomirski]

On Thu, Jun 5, 2014 at 12:24 PM, Lennart Poettering
<mzxreary@0pointer.de> wrote:
> On Thu, 05.06.14 20:01, Luis R. Rodriguez (mcgrof@suse.com) wrote:
>
>> > Hmm? You should "exec" the real daemon binary at the end, not just fork
>> > it off. That wait the shell script process is replaced by the daemon
>> > binary, which is what you want.
>>
>> I tried both just running it and also running exec foo; both presented
>> the same issue given that shell exec does not really execve.
>
> Hmmm? You shell's "exec" command doesn't actually execve()? What are you
> using? This doesn't sound very accurate...

$ strace -e execve /bin/sh -c 'exec /bin/echo test'
execve("/bin/sh", ["/bin/sh", "-c", "exec /bin/echo test"], [/* 54 vars */]) = 0
execve("/bin/echo", ["/bin/echo", "test"], [/* 54 vars */]) = 0
test
+++ exited with 0 +++

I get similar results on Ubuntu using dash.

--Andy