From: Andrew Vagin <avagin@parallels.com>
To: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>,
LKML <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>, <avagin@openvz.org>,
<xemul@parallels.com>, <vdavydov@parallels.com>,
Michael Kerrisk <mtk.manpages@gmail.com>
Subject: Re: [patch 3/3] timerfd: Implement write method
Date: Wed, 11 Jun 2014 11:27:43 +0400 [thread overview]
Message-ID: <20140611072743.GA10612@paralelels.com> (raw)
In-Reply-To: <20140610163530.GF2243@moon>
On Tue, Jun 10, 2014 at 08:35:30PM +0400, Cyrill Gorcunov wrote:
> On Thu, May 22, 2014 at 06:58:19AM +0900, Thomas Gleixner wrote:
> > >
> > > So what wakes a potential waiter in read/poll?
> >
> > And who is updating timerfd_create(2) ?
>
> Thomas, could you please take a look if the approach below is acceptable?
> If it will be fine I update manpage then.
> ---
> From: Cyrill Gorcunov <gorcunov@openvz.org>
> Subject: timerfd: Implement timerfd_ioctl method to restore timerfd_ctx::ticks
>
> The read() of timerfd files allows to fetch the number of timer ticks
> while there is no way to set it back from userspace.
>
> To restore the timer's state as it was at checkpoint moment we need
> a path to bring @ticks back. Initially I thought about writing ticks
> back via write() interface but it seems such API is somehow obscure.
>
> Instead implement timerfd_ioctl() method with TFD_IOC_SET_TICKS
> command which requires CAP_SYS_RESOURCE capability to be able to
> set @ticks into arbitrary value. Note this command doesn't wake
> up readers/waiters and its purpose only to serve C/R needs
> (for same sake I wrapped code with CONFIG_CHECKPOINT_RESTORE).
> Still if needed the ioctl may be extended for new commands
> and CONFIG_CHECKPOINT_RESTORE dropped off.
>
> CC: Thomas Gleixner <tglx@linutronix.de>
> CC: Andrew Morton <akpm@linux-foundation.org>
> CC: Andrey Vagin <avagin@openvz.org>
> CC: Pavel Emelyanov <xemul@parallels.com>
> CC: Vladimir Davydov <vdavydov@parallels.com>
> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
> ---
> fs/timerfd.c | 31 +++++++++++++++++++++++++++++++
> include/linux/timerfd.h | 5 +++++
> 2 files changed, 36 insertions(+)
>
> Index: linux-2.6.git/fs/timerfd.c
> ===================================================================
> --- linux-2.6.git.orig/fs/timerfd.c
> +++ linux-2.6.git/fs/timerfd.c
> @@ -313,11 +313,42 @@ static int timerfd_show(struct seq_file
> }
> #endif
>
> +#ifdef CONFIG_CHECKPOINT_RESTORE
> +static long timerfd_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> +{
> + struct timerfd_ctx *ctx = file->private_data;
> + int ret = 0;
> +
> + switch (cmd) {
> + case TFD_IOC_SET_TICKS: {
> + u64 ticks;
> +
> + if (!capable(CAP_SYS_RESOURCE))
> + return -EPERM;
I think it is too strong. It will not work in userns.
Why do we need to check CAP_SYS_RESOURCE here?
Can we replace capable on ns_capable?
> + if (get_user(ticks, (u64 __user *)arg))
> + return -EFAULT;
> + spin_lock_irq(&ctx->wqh.lock);
> + ctx->ticks = ticks;
I think we need to wakt up readers here if ctx->ticks isn't zero.
> + spin_unlock_irq(&ctx->wqh.lock);
> + break;
> + }
> + default:
> + ret = -ENOTTY;
> + break;
> + }
> +
> + return ret;
> +}
> +#endif
> +
> static const struct file_operations timerfd_fops = {
> .release = timerfd_release,
> .poll = timerfd_poll,
> .read = timerfd_read,
> .llseek = noop_llseek,
> +#ifdef CONFIG_CHECKPOINT_RESTORE
> + .unlocked_ioctl = timerfd_ioctl,
> +#endif
> #ifdef CONFIG_PROC_FS
> .show_fdinfo = timerfd_show,
> #endif
> Index: linux-2.6.git/include/linux/timerfd.h
> ===================================================================
> --- linux-2.6.git.orig/include/linux/timerfd.h
> +++ linux-2.6.git/include/linux/timerfd.h
> @@ -11,6 +11,9 @@
> /* For O_CLOEXEC and O_NONBLOCK */
> #include <linux/fcntl.h>
>
> +/* For _IO helpers */
> +#include <linux/ioctl.h>
> +
> /*
> * CAREFUL: Check include/asm-generic/fcntl.h when defining
> * new flags, since they might collide with O_* ones. We want
> @@ -29,4 +32,6 @@
> /* Flags for timerfd_settime. */
> #define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET)
>
> +#define TFD_IOC_SET_TICKS _IOW('T', 0, u64)
> +
> #endif /* _LINUX_TIMERFD_H */
next prev parent reply other threads:[~2014-06-11 7:27 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-28 21:25 [patch 0/3] timerfd -- implement missing parts to checkpoint and restore timerfd state, v3 Cyrill Gorcunov
2014-04-28 21:25 ` [patch 1/3] timerfd: Implement show_fdinfo method Cyrill Gorcunov
2014-05-21 21:41 ` Thomas Gleixner
2014-05-21 21:54 ` Cyrill Gorcunov
2014-04-28 21:25 ` [patch 2/3] docs: procfs -- Document timerfd output Cyrill Gorcunov
2014-04-28 21:25 ` [patch 3/3] timerfd: Implement write method Cyrill Gorcunov
2014-05-21 21:43 ` Thomas Gleixner
2014-05-21 21:57 ` Cyrill Gorcunov
2014-05-21 22:12 ` Thomas Gleixner
2014-05-21 22:35 ` Cyrill Gorcunov
2014-05-21 23:30 ` Thomas Gleixner
2014-05-22 5:31 ` Cyrill Gorcunov
2014-05-22 6:32 ` Michael Kerrisk
2014-05-22 7:03 ` Cyrill Gorcunov
[not found] ` <alpine.DEB.2.02.1405220643170.9695@ionos.tec.linutronix.de>
2014-05-21 21:58 ` Thomas Gleixner
2014-06-10 16:35 ` Cyrill Gorcunov
2014-06-10 20:03 ` Michael Kerrisk (man-pages)
2014-06-10 20:05 ` Andy Lutomirski
2014-06-10 20:22 ` Cyrill Gorcunov
2014-06-11 7:27 ` Andrew Vagin [this message]
2014-06-11 7:51 ` Cyrill Gorcunov
2014-06-11 9:09 ` Andrew Vagin
2014-06-11 9:52 ` Cyrill Gorcunov
2014-06-11 12:43 ` Cyrill Gorcunov
2014-05-21 10:03 ` [patch 0/3] timerfd -- implement missing parts to checkpoint and restore timerfd state, v3 Cyrill Gorcunov
-- strict thread matches above, loose matches on Subject: below --
2014-04-07 17:47 [patch 0/3] timerfd -- implement missing parts to checkpoint and restore timerfd state, v2 Cyrill Gorcunov
2014-04-07 17:47 ` [patch 3/3] timerfd: Implement write method Cyrill Gorcunov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140611072743.GA10612@paralelels.com \
--to=avagin@parallels.com \
--cc=akpm@linux-foundation.org \
--cc=avagin@openvz.org \
--cc=gorcunov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mtk.manpages@gmail.com \
--cc=tglx@linutronix.de \
--cc=vdavydov@parallels.com \
--cc=xemul@parallels.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).