public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mike Turquette <mturquette@linaro.org>
To: Karol Wrona <k.wrona@samsung.com>,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Cc: "Kyungmin Park" <kyungmin.park@samsung.com>,
	"Marek Szyprowski" <m.szyprowski@samsung.com>,
	"Bartlomiej Zolnierkiewicz" <b.zolnierkie@samsung.com>,
	"Tomasz Figa" <t.figa@samsung.com>,
	"Karol Wrona" <k.wrona@samsung.com>
Subject: Re: [PATCH v2] clk: s2mps11: Fix clk_ops
Date: Wed, 02 Jul 2014 10:01:04 -0700	[thread overview]
Message-ID: <20140702170104.7440.66617@quantum> (raw)
In-Reply-To: <1404234839-6005-1-git-send-email-k.wrona@samsung.com>

Quoting Karol Wrona (2014-07-01 10:13:59)
> s2mps11 clocks had registered callbacks for prepare ,unprepare and is_enabled.
> During disabling unused clocks the lack of is_prepared caused that unused
> s2mps11 clocks were not unprepared and stayed active.
> 
> Regmap_read is cached so it can be called in is_prepare callback
> to achieve this information. Enabled field was removed from struct s2mps11_clk.
> 
> Signed-off-by: Karol Wrona <k.wrona@samsung.com>

Applied to clk-next. I didn't take it into clk-fixes since I don't think
the disable_unused bug was introduced any time recently.

Regards,
Mike

> ---
>  drivers/clk/clk-s2mps11.c |   33 +++++++++++----------------------
>  1 file changed, 11 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/clk/clk-s2mps11.c b/drivers/clk/clk-s2mps11.c
> index b5274a9..5df99a4 100644
> --- a/drivers/clk/clk-s2mps11.c
> +++ b/drivers/clk/clk-s2mps11.c
> @@ -45,7 +45,6 @@ struct s2mps11_clk {
>         struct clk *clk;
>         struct clk_lookup *lookup;
>         u32 mask;
> -       bool enabled;
>         unsigned int reg;
>  };
>  
> @@ -62,8 +61,6 @@ static int s2mps11_clk_prepare(struct clk_hw *hw)
>         ret = regmap_update_bits(s2mps11->iodev->regmap_pmic,
>                                  s2mps11->reg,
>                                  s2mps11->mask, s2mps11->mask);
> -       if (!ret)
> -               s2mps11->enabled = true;
>  
>         return ret;
>  }
> @@ -75,32 +72,32 @@ static void s2mps11_clk_unprepare(struct clk_hw *hw)
>  
>         ret = regmap_update_bits(s2mps11->iodev->regmap_pmic, s2mps11->reg,
>                            s2mps11->mask, ~s2mps11->mask);
> -
> -       if (!ret)
> -               s2mps11->enabled = false;
>  }
>  
> -static int s2mps11_clk_is_enabled(struct clk_hw *hw)
> +static int s2mps11_clk_is_prepared(struct clk_hw *hw)
>  {
> +       int ret;
> +       u32 val;
>         struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw);
>  
> -       return s2mps11->enabled;
> +       ret = regmap_read(s2mps11->iodev->regmap_pmic,
> +                               s2mps11->reg, &val);
> +       if (ret < 0)
> +               return -EINVAL;
> +
> +       return val & s2mps11->mask;
>  }
>  
>  static unsigned long s2mps11_clk_recalc_rate(struct clk_hw *hw,
>                                              unsigned long parent_rate)
>  {
> -       struct s2mps11_clk *s2mps11 = to_s2mps11_clk(hw);
> -       if (s2mps11->enabled)
> -               return 32768;
> -       else
> -               return 0;
> +       return 32768;
>  }
>  
>  static struct clk_ops s2mps11_clk_ops = {
>         .prepare        = s2mps11_clk_prepare,
>         .unprepare      = s2mps11_clk_unprepare,
> -       .is_enabled     = s2mps11_clk_is_enabled,
> +       .is_prepared    = s2mps11_clk_is_prepared,
>         .recalc_rate    = s2mps11_clk_recalc_rate,
>  };
>  
> @@ -174,7 +171,6 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>         unsigned int s2mps11_reg;
>         struct clk_init_data *clks_init;
>         int i, ret = 0;
> -       u32 val;
>  
>         s2mps11_clks = devm_kzalloc(&pdev->dev, sizeof(*s2mps11_clk) *
>                                         S2MPS11_CLKS_NUM, GFP_KERNEL);
> @@ -213,13 +209,6 @@ static int s2mps11_clk_probe(struct platform_device *pdev)
>                 s2mps11_clk->mask = 1 << i;
>                 s2mps11_clk->reg = s2mps11_reg;
>  
> -               ret = regmap_read(s2mps11_clk->iodev->regmap_pmic,
> -                                 s2mps11_clk->reg, &val);
> -               if (ret < 0)
> -                       goto err_reg;
> -
> -               s2mps11_clk->enabled = val & s2mps11_clk->mask;
> -
>                 s2mps11_clk->clk = devm_clk_register(&pdev->dev,
>                                                         &s2mps11_clk->hw);
>                 if (IS_ERR(s2mps11_clk->clk)) {
> -- 
> 1.7.9.5
> 

      reply	other threads:[~2014-07-02 17:01 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-01 17:13 [PATCH v2] clk: s2mps11: Fix clk_ops Karol Wrona
2014-07-02 17:01 ` Mike Turquette [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140702170104.7440.66617@quantum \
    --to=mturquette@linaro.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=k.wrona@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=t.figa@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox