From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Bill <billstuff2001@sbcglobal.net>,
NeilBrown <neilb@suse.de>
Subject: [PATCH 3.4 26/44] md: flush writes before starting a recovery.
Date: Mon, 7 Jul 2014 17:07:16 -0700 [thread overview]
Message-ID: <20140707235859.428481996@linuxfoundation.org> (raw)
In-Reply-To: <20140707235858.652771077@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit 133d4527eab8d199a62eee6bd433f0776842df2e upstream.
When we write to a degraded array which has a bitmap, we
make sure the relevant bit in the bitmap remains set when
the write completes (so a 're-add' can quickly rebuilt a
temporarily-missing device).
If, immediately after such a write starts, we incorporate a spare,
commence recovery, and skip over the region where the write is
happening (because the 'needs recovery' flag isn't set yet),
then that write will not get to the new device.
Once the recovery finishes the new device will be trusted, but will
have incorrect data, leading to possible corruption.
We cannot set the 'needs recovery' flag when we start the write as we
do not know easily if the write will be "degraded" or not. That
depends on details of the particular raid level and particular write
request.
This patch fixes a corruption issue of long standing and so it
suitable for any -stable kernel. It applied correctly to 3.0 at
least and will minor editing to earlier kernels.
Reported-by: Bill <billstuff2001@sbcglobal.net>
Tested-by: Bill <billstuff2001@sbcglobal.net>
Link: http://lkml.kernel.org/r/53A518BB.60709@sbcglobal.net
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -7180,6 +7180,19 @@ void md_do_sync(struct mddev *mddev)
rdev->recovery_offset < j)
j = rdev->recovery_offset;
rcu_read_unlock();
+
+ /* If there is a bitmap, we need to make sure all
+ * writes that started before we added a spare
+ * complete before we start doing a recovery.
+ * Otherwise the write might complete and (via
+ * bitmap_endwrite) set a bit in the bitmap after the
+ * recovery has checked that bit and skipped that
+ * region.
+ */
+ if (mddev->bitmap) {
+ mddev->pers->quiesce(mddev, 1);
+ mddev->pers->quiesce(mddev, 0);
+ }
}
printk(KERN_INFO "md: %s of RAID array %s\n", desc, mdname(mddev));
next prev parent reply other threads:[~2014-07-08 0:03 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-08 0:06 [PATCH 3.4 00/44] 3.4.98-stable review Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 01/44] ibmvscsi: Abort init sequence during error recovery Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 02/44] xhci: correct burst count field for isoc transfers on 1.0 xhci hosts Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 03/44] xhci: Fix runtime suspended xhci from blocking system suspend Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 05/44] USB: option: add device ID for SpeedUp SU9800 usb 3g modem Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 07/44] USB: ftdi_sio: fix null deref at port probe Greg Kroah-Hartman
2014-07-08 0:06 ` [PATCH 3.4 09/44] rt2x00: disable TKIP on USB Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 10/44] rt2x00: fix rfkill regression on rt2500pci Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 11/44] mtd: pxa3xx_nand: make the driver work on big-endian systems Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 12/44] drm/radeon: only apply hdmi bpc pll flags when encoder mode is hdmi Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 13/44] drm/radeon: fix typo in radeon_connector_is_dp12_capable() Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 14/44] drm/radeon/atom: fix dithering on certain panels Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 15/44] drm/vmwgfx: Fix incorrect write to read-only register v2: Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 16/44] Bluetooth: Fix SSP acceptor just-works confirmation without MITM Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 17/44] Bluetooth: Remove unused hci_le_ltk_reply() Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 18/44] mac80211: dont check netdev state for debugfs read/write Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 19/44] ARM: OMAP2+: Fix parser-bug in platform muxing code Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 21/44] CIFS: fix mount failure with broken pathnames when smb3 mount with mapchars option Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 22/44] KVM: x86: Increase the number of fixed MTRR regs to 10 Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 23/44] KVM: x86: preserve the high 32-bits of the PAT register Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 24/44] nfsd: fix rare symlink decoding bug Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 25/44] tools: ffs-test: fix header values endianess Greg Kroah-Hartman
2014-07-08 0:07 ` Greg Kroah-Hartman [this message]
2014-07-08 0:07 ` [PATCH 3.4 27/44] sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 28/44] acpi/video_detect: blacklist samsung x360 Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 29/44] ACPI / video: Add "Asus UL30VT" to ACPI video detect blacklist Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 30/44] ACPI / video: Add "Asus UL30A" " Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 31/44] ACPI video: ignore BIOS initial backlight value for HP 1000 Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 32/44] staging: comedi: das08: Correct AI encoding for das08jr-16-ao Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 33/44] staging: comedi: fix a race between do_cmd_ioctl() and read/write Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 34/44] staging: wlags49_h2: buffer overflow setting station name Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 35/44] Staging: bcm: Create and initialize new device id in InterfaceInit Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 36/44] Staging: bcm: Add two products and remove an existing product Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 37/44] powerpc: Fix emulation of illegal instructions on PowerNV platform Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 38/44] powerpc/smp: Section mismatch from smp_release_cpus to __initdata spinning_secondaries Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 39/44] powerpc: Dont Oops when accessing /proc/powerpc/lparcfg without hypervisor Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 40/44] powerpc: Restore registers on error exit from csum_partial_copy_generic() Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 41/44] powerpc/pseries/lparcfg: Fix possible overflow are more than 1026 Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 42/44] powerpc/pseries: Duplicate dtl entries sometimes sent to userspace Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 43/44] ACPI video: ignore BIOS backlight value for HP dm4 Greg Kroah-Hartman
2014-07-08 0:07 ` [PATCH 3.4 44/44] powerpc/sysfs: Disable writing to PURR in guest mode Greg Kroah-Hartman
2014-07-08 13:14 ` [PATCH 3.4 00/44] 3.4.98-stable review Guenter Roeck
2014-07-08 22:14 ` Greg Kroah-Hartman
2014-07-08 19:30 ` Shuah Khan
2014-07-08 22:14 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140707235859.428481996@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=billstuff2001@sbcglobal.net \
--cc=linux-kernel@vger.kernel.org \
--cc=neilb@suse.de \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox