From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
To: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: konrad@kernel.org, xen-devel@lists.xenproject.org,
david.vrabel@citrix.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 2/5] xen/pciback: Don't deadlock when unbinding.
Date: Mon, 14 Jul 2014 10:13:28 -0400 [thread overview]
Message-ID: <20140714141328.GA5112@laptop.dumpdata.com> (raw)
In-Reply-To: <20140711210201.GC25233@laptop.dumpdata.com>
On Fri, Jul 11, 2014 at 05:02:01PM -0400, Konrad Rzeszutek Wilk wrote:
> > >--- a/drivers/xen/xen-pciback/pci_stub.c
> > >+++ b/drivers/xen/xen-pciback/pci_stub.c
> > >@@ -250,6 +250,8 @@ struct pci_dev *pcistub_get_pci_dev(struct xen_pcibk_device *pdev,
> > > * - 'echo BDF > unbind' with a guest still using it. See pcistub_remove
> > > *
> > > * As such we have to be careful.
> > >+ *
> > >+ * To make this easier, the caller has to hold the device lock.
> >
> > Should we assert that the lock is being held?
>
> Yes of course we should. Thank you!
How about this:
>From 388a03c598218dac8bfeb6c5bf3992e0d1e37d1e Mon Sep 17 00:00:00 2001
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Date: Tue, 8 Jul 2014 11:12:02 -0400
Subject: [PATCH] xen/pciback: Don't deadlock when unbinding.
As commit 0a9fd0152929db372ff61b0d6c280fdd34ae8bdb
'xen/pciback: Document the entry points for 'pcistub_put_pci_dev''
explained there are four entry points in this function.
Two of them are when the user fiddles in the SysFS to
unbind a device which might be in use by a guest or not.
Both 'unbind' states will cause a deadlock as the the PCI lock has
already been taken, which then pci_device_reset tries to take.
We can simplify this by requiring that all callers of
pcistub_put_pci_dev MUST hold the device lock. And then
we can just call the lockless version of pci_device_reset.
To make it even simpler we will modify xen_pcibk_release_pci_dev
to quality whether it should take a lock or not - as it ends
up calling xen_pcibk_release_pci_dev and needs to hold the lock.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
[v2: Per David Vrabel's suggestion - use lockless version of reset]
[v3: Per Boris suggestion add assertion mechanism]
---
drivers/xen/xen-pciback/passthrough.c | 9 +++++++--
drivers/xen/xen-pciback/pci_stub.c | 12 ++++++------
drivers/xen/xen-pciback/pciback.h | 7 ++++---
drivers/xen/xen-pciback/vpci.c | 9 +++++++--
drivers/xen/xen-pciback/xenbus.c | 2 +-
5 files changed, 25 insertions(+), 14 deletions(-)
diff --git a/drivers/xen/xen-pciback/passthrough.c b/drivers/xen/xen-pciback/passthrough.c
index 828dddc..d0c3fb4 100644
--- a/drivers/xen/xen-pciback/passthrough.c
+++ b/drivers/xen/xen-pciback/passthrough.c
@@ -69,7 +69,7 @@ static int __xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev,
}
static void __xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
- struct pci_dev *dev)
+ struct pci_dev *dev, bool lock)
{
struct passthrough_dev_data *dev_data = pdev->pci_dev_data;
struct pci_dev_entry *dev_entry, *t;
@@ -87,8 +87,13 @@ static void __xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
mutex_unlock(&dev_data->lock);
- if (found_dev)
+ if (found_dev) {
+ if (lock)
+ device_lock(&found_dev->dev);
pcistub_put_pci_dev(found_dev);
+ if (lock)
+ device_unlock(&found_dev->dev);
+ }
}
static int __xen_pcibk_init_devices(struct xen_pcibk_device *pdev)
diff --git a/drivers/xen/xen-pciback/pci_stub.c b/drivers/xen/xen-pciback/pci_stub.c
index d57a173..8293fbb 100644
--- a/drivers/xen/xen-pciback/pci_stub.c
+++ b/drivers/xen/xen-pciback/pci_stub.c
@@ -250,6 +250,8 @@ struct pci_dev *pcistub_get_pci_dev(struct xen_pcibk_device *pdev,
* - 'echo BDF > unbind' with a guest still using it. See pcistub_remove
*
* As such we have to be careful.
+ *
+ * To make this easier, the caller has to hold the device lock.
*/
void pcistub_put_pci_dev(struct pci_dev *dev)
{
@@ -276,11 +278,8 @@ void pcistub_put_pci_dev(struct pci_dev *dev)
/* Cleanup our device
* (so it's ready for the next domain)
*/
-
- /* This is OK - we are running from workqueue context
- * and want to inhibit the user from fiddling with 'reset'
- */
- pci_reset_function(dev);
+ lockdep_assert_held(&dev->dev.mutex);
+ __pci_reset_function_locked(dev);
pci_restore_state(dev);
/* This disables the device. */
@@ -567,7 +566,8 @@ static void pcistub_remove(struct pci_dev *dev)
/* N.B. This ends up calling pcistub_put_pci_dev which ends up
* doing the FLR. */
xen_pcibk_release_pci_dev(found_psdev->pdev,
- found_psdev->dev);
+ found_psdev->dev,
+ false /* caller holds the lock. */);
}
spin_lock_irqsave(&pcistub_devices_lock, flags);
diff --git a/drivers/xen/xen-pciback/pciback.h b/drivers/xen/xen-pciback/pciback.h
index f72af87..58e38d5 100644
--- a/drivers/xen/xen-pciback/pciback.h
+++ b/drivers/xen/xen-pciback/pciback.h
@@ -99,7 +99,8 @@ struct xen_pcibk_backend {
unsigned int *domain, unsigned int *bus,
unsigned int *devfn);
int (*publish)(struct xen_pcibk_device *pdev, publish_pci_root_cb cb);
- void (*release)(struct xen_pcibk_device *pdev, struct pci_dev *dev);
+ void (*release)(struct xen_pcibk_device *pdev, struct pci_dev *dev,
+ bool lock);
int (*add)(struct xen_pcibk_device *pdev, struct pci_dev *dev,
int devid, publish_pci_dev_cb publish_cb);
struct pci_dev *(*get)(struct xen_pcibk_device *pdev,
@@ -122,10 +123,10 @@ static inline int xen_pcibk_add_pci_dev(struct xen_pcibk_device *pdev,
}
static inline void xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
- struct pci_dev *dev)
+ struct pci_dev *dev, bool lock)
{
if (xen_pcibk_backend && xen_pcibk_backend->release)
- return xen_pcibk_backend->release(pdev, dev);
+ return xen_pcibk_backend->release(pdev, dev, lock);
}
static inline struct pci_dev *
diff --git a/drivers/xen/xen-pciback/vpci.c b/drivers/xen/xen-pciback/vpci.c
index 51afff9..2fdfcb9 100644
--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -145,7 +145,7 @@ out:
}
static void __xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
- struct pci_dev *dev)
+ struct pci_dev *dev, bool lock)
{
int slot;
struct vpci_dev_data *vpci_dev = pdev->pci_dev_data;
@@ -169,8 +169,13 @@ static void __xen_pcibk_release_pci_dev(struct xen_pcibk_device *pdev,
out:
mutex_unlock(&vpci_dev->lock);
- if (found_dev)
+ if (found_dev) {
+ if (lock)
+ device_lock(&found_dev->dev);
pcistub_put_pci_dev(found_dev);
+ if (lock)
+ device_unlock(&found_dev->dev);
+ }
}
static int __xen_pcibk_init_devices(struct xen_pcibk_device *pdev)
diff --git a/drivers/xen/xen-pciback/xenbus.c b/drivers/xen/xen-pciback/xenbus.c
index 4a7e6e0..b3318fd 100644
--- a/drivers/xen/xen-pciback/xenbus.c
+++ b/drivers/xen/xen-pciback/xenbus.c
@@ -290,7 +290,7 @@ static int xen_pcibk_remove_device(struct xen_pcibk_device *pdev,
/* N.B. This ends up calling pcistub_put_pci_dev which ends up
* doing the FLR. */
- xen_pcibk_release_pci_dev(pdev, dev);
+ xen_pcibk_release_pci_dev(pdev, dev, true /* use the lock. */);
out:
return err;
--
1.9.3
next prev parent reply other threads:[~2014-07-14 14:13 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-11 20:08 [PATCH v4] PCI back fixes for 3.17 konrad
2014-07-11 20:08 ` [PATCH v4 1/5] xen-pciback: Document the various parameters and attributes in SysFS konrad
2014-07-11 20:46 ` Boris Ostrovsky
2014-07-14 16:28 ` Konrad Rzeszutek Wilk
2014-07-11 20:08 ` [PATCH v4 2/5] xen/pciback: Don't deadlock when unbinding konrad
2014-07-11 20:48 ` Boris Ostrovsky
2014-07-11 21:02 ` Konrad Rzeszutek Wilk
2014-07-14 14:13 ` Konrad Rzeszutek Wilk [this message]
2014-07-14 14:30 ` Boris Ostrovsky
2014-07-14 15:42 ` Konrad Rzeszutek Wilk
2014-07-11 20:08 ` [PATCH v4 3/5] xen/pciback: Include the domain id if removing the device whilst still in use konrad
2014-07-11 20:08 ` [PATCH v4 4/5] xen/pciback: Print out the domain owning the device konrad
2014-07-11 20:08 ` [PATCH v4 5/5] xen/pciback: Remove tons of dereferences konrad
2014-07-11 20:54 ` Boris Ostrovsky
2014-07-14 16:37 ` [Xen-devel] [PATCH v4] PCI back fixes for 3.17 Sander Eikelenboom
2014-07-14 17:22 ` Konrad Rzeszutek Wilk
2014-07-14 17:29 ` Sander Eikelenboom
2014-07-14 17:37 ` Konrad Rzeszutek Wilk
2014-07-14 17:43 ` Sander Eikelenboom
2014-07-14 17:45 ` Konrad Rzeszutek Wilk
2014-07-14 18:24 ` Sander Eikelenboom
2014-07-14 18:45 ` Konrad Rzeszutek Wilk
2014-07-14 19:01 ` Sander Eikelenboom
2014-07-14 19:50 ` Sander Eikelenboom
2014-07-14 19:54 ` Konrad Rzeszutek Wilk
2014-07-14 20:16 ` Sander Eikelenboom
2014-07-14 20:18 ` Konrad Rzeszutek Wilk
2014-07-14 20:21 ` Sander Eikelenboom
2014-07-14 20:25 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140714141328.GA5112@laptop.dumpdata.com \
--to=konrad.wilk@oracle.com \
--cc=boris.ostrovsky@oracle.com \
--cc=david.vrabel@citrix.com \
--cc=konrad@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox