[PATCH] ASoC: wm8962: Let CODEC driver enable and disable its own MCLK

[PATCH] ASoC: wm8962: Let CODEC driver enable and disable its own MCLK

[Nicolin Chen]

snd_soc_open() will trigger pm_runtime resume() which will then enable
the regulator and initialization. So we should make sure the MCLK is
enabled before this resume().

Previously we let the machine driver get the clock and enable it in
its probe(). However, considering about power saving, it'll be better
to enable it when it's going to be used and disable it after using.

So this patch just simply adds clk_get() and clk_enable() to WM8962
driver. Meanwhile, it marks clock pointer to NULL if no clock assigned
to it so it will not break any current function.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
 include/sound/wm8962.h    |  1 +
 sound/soc/codecs/wm8962.c | 11 +++++++++++
 2 files changed, 12 insertions(+)

diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h
index 79e6d42..0af7c16 100644
--- a/include/sound/wm8962.h
+++ b/include/sound/wm8962.h
@@ -37,6 +37,7 @@
 #define WM8962_GPIO_FN_MICSCD          22
 
 struct wm8962_pdata {
+	struct clk *mclk;
 	int gpio_base;
 	u32 gpio_init[WM8962_MAX_GPIO];
 
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index ca2fda9..256ae51 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/gcd.h>
@@ -3541,6 +3542,8 @@ static int wm8962_set_pdata_from_of(struct i2c_client *i2c,
 				pdata->gpio_init[i] = 0x0;
 		}
 
+	pdata->mclk = devm_clk_get(&i2c->dev, NULL);
+
 	return 0;
 }
 
@@ -3572,6 +3575,10 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
 			return ret;
 	}
 
+	/* Mark the mclk pointer to NULL if no mclk assigned */
+	if (IS_ERR(pdata->mclk))
+		pdata->mclk = NULL;
+
 	for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
 		wm8962->supplies[i].supply = wm8962_supply_names[i];
 
@@ -3780,6 +3787,8 @@ static int wm8962_runtime_resume(struct device *dev)
 	struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
 	int ret;
 
+	clk_prepare_enable(wm8962->pdata.mclk);
+
 	ret = regulator_bulk_enable(ARRAY_SIZE(wm8962->supplies),
 				    wm8962->supplies);
 	if (ret != 0) {
@@ -3839,6 +3848,8 @@ static int wm8962_runtime_suspend(struct device *dev)
 	regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies),
 			       wm8962->supplies);
 
+	clk_disable_unprepare(wm8962->pdata.mclk);
+
 	return 0;
 }
 #endif
-- 
1.8.4

Re: [PATCH] ASoC: wm8962: Let CODEC driver enable and disable its own MCLK

[Nicolin Chen]

PLEASE IGNORE THIS VERSION

On Mon, Jul 28, 2014 at 06:56:01PM +0800, Nicolin Chen wrote:
> snd_soc_open() will trigger pm_runtime resume() which will then enable
> the regulator and initialization. So we should make sure the MCLK is
> enabled before this resume().
> 
> Previously we let the machine driver get the clock and enable it in
> its probe(). However, considering about power saving, it'll be better
> to enable it when it's going to be used and disable it after using.
> 
> So this patch just simply adds clk_get() and clk_enable() to WM8962
> driver. Meanwhile, it marks clock pointer to NULL if no clock assigned
> to it so it will not break any current function.
> 
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>

Sorry, the patch has some problem. I'll send v2 to fix it.

Please ignore this version.

Thank you,
Nicolin

> ---
>  include/sound/wm8962.h    |  1 +
>  sound/soc/codecs/wm8962.c | 11 +++++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/include/sound/wm8962.h b/include/sound/wm8962.h
> index 79e6d42..0af7c16 100644
> --- a/include/sound/wm8962.h
> +++ b/include/sound/wm8962.h
> @@ -37,6 +37,7 @@
>  #define WM8962_GPIO_FN_MICSCD          22
>  
>  struct wm8962_pdata {
> +	struct clk *mclk;
>  	int gpio_base;
>  	u32 gpio_init[WM8962_MAX_GPIO];
>  
> diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
> index ca2fda9..256ae51 100644
> --- a/sound/soc/codecs/wm8962.c
> +++ b/sound/soc/codecs/wm8962.c
> @@ -14,6 +14,7 @@
>  #include <linux/module.h>
>  #include <linux/moduleparam.h>
>  #include <linux/init.h>
> +#include <linux/clk.h>
>  #include <linux/delay.h>
>  #include <linux/pm.h>
>  #include <linux/gcd.h>
> @@ -3541,6 +3542,8 @@ static int wm8962_set_pdata_from_of(struct i2c_client *i2c,
>  				pdata->gpio_init[i] = 0x0;
>  		}
>  
> +	pdata->mclk = devm_clk_get(&i2c->dev, NULL);
> +
>  	return 0;
>  }
>  
> @@ -3572,6 +3575,10 @@ static int wm8962_i2c_probe(struct i2c_client *i2c,
>  			return ret;
>  	}
>  
> +	/* Mark the mclk pointer to NULL if no mclk assigned */
> +	if (IS_ERR(pdata->mclk))
> +		pdata->mclk = NULL;
> +
>  	for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
>  		wm8962->supplies[i].supply = wm8962_supply_names[i];
>  
> @@ -3780,6 +3787,8 @@ static int wm8962_runtime_resume(struct device *dev)
>  	struct wm8962_priv *wm8962 = dev_get_drvdata(dev);
>  	int ret;
>  
> +	clk_prepare_enable(wm8962->pdata.mclk);
> +
>  	ret = regulator_bulk_enable(ARRAY_SIZE(wm8962->supplies),
>  				    wm8962->supplies);
>  	if (ret != 0) {
> @@ -3839,6 +3848,8 @@ static int wm8962_runtime_suspend(struct device *dev)
>  	regulator_bulk_disable(ARRAY_SIZE(wm8962->supplies),
>  			       wm8962->supplies);
>  
> +	clk_disable_unprepare(wm8962->pdata.mclk);
> +
>  	return 0;
>  }
>  #endif
> -- 
> 1.8.4
>