From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754539AbaG3O7R (ORCPT ); Wed, 30 Jul 2014 10:59:17 -0400 Received: from top.free-electrons.com ([176.31.233.9]:56253 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753334AbaG3O7P (ORCPT ); Wed, 30 Jul 2014 10:59:15 -0400 Date: Wed, 30 Jul 2014 16:59:12 +0200 From: Boris BREZILLON To: Boris BREZILLON Cc: David Woodhouse , Brian Norris , linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 2/2] mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table Message-ID: <20140730165912.74e81f4c@bbrezillon> In-Reply-To: <1406539012-16320-3-git-send-email-boris.brezillon@free-electrons.com> References: <1406539012-16320-1-git-send-email-boris.brezillon@free-electrons.com> <1406539012-16320-3-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: Claws Mail 3.8.1 (GTK+ 2.24.20; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, 28 Jul 2014 11:16:52 +0200 Boris BREZILLON wrote: > Add the full description of the Hynix H27UCG8T2ATR-BC NAND chip in the > nand_ids table so that we can later use the NAND ECC infos and ONFI timings > mode in controller drivers. > > Signed-off-by: Boris BREZILLON > --- > drivers/mtd/nand/nand_ids.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c > index 3d7c89f..19d4168 100644 > --- a/drivers/mtd/nand/nand_ids.c > +++ b/drivers/mtd/nand/nand_ids.c > @@ -46,6 +46,10 @@ struct nand_flash_dev nand_flash_ids[] = { > {"SDTNRGAMA 64G 3.3V 8-bit", > { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} }, > SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) }, > + {"H27UCG8T2ATR-BC 64G 3.3V 8-bit", > + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, > + SZ_8K, SZ_8K, SZ_4M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K), There is a big mistake here ------^ It should be SZ_2M not SZ_4M, I'll fix that. -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com