From: Wanpeng Li <wanpeng.li@linux.intel.com>
To: Felipe Reyes <freyes@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>,
Jan Kiszka <jan.kiszka@siemens.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Gleb Natapov <gleb@kernel.org>, Bandan Das <bsd@redhat.com>,
Zhang Yang <yang.z.zhang@intel.com>,
Davidlohr Bueso <davidlohr@hp.com>,
kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] KVM: nVMX: fix acknowledge interrupt on exit when APICv is in use
Date: Tue, 5 Aug 2014 20:44:20 +0800 [thread overview]
Message-ID: <20140805124420.GA19457@kernel> (raw)
In-Reply-To: <53E0D069.3010202@suse.com>
On Tue, Aug 05, 2014 at 02:39:05PM +0200, Felipe Reyes wrote:
>Hi,
>
>On 08/05/2014 01:04 PM, Paolo Bonzini wrote:
>>Il 05/08/2014 06:42, Wanpeng Li ha scritto:
>>>After commit 77b0f5d (KVM: nVMX: Ack and write vector info to intr_info
>>>if L1 asks us to), "Acknowledge interrupt on exit" behavior can be
>>>emulated. To do so, KVM will ask the APIC for the interrupt vector if
>>>during a nested vmexit if VM_EXIT_ACK_INTR_ON_EXIT is set. With APICv,
>>>kvm_get_apic_interrupt would return -1 and give the following WARNING:
>>>
>>>Call Trace:
>>> [<ffffffff81493563>] dump_stack+0x49/0x5e
>>> [<ffffffff8103f0eb>] warn_slowpath_common+0x7c/0x96
>>> [<ffffffffa059709a>] ? nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
>>> [<ffffffff8103f11a>] warn_slowpath_null+0x15/0x17
>>> [<ffffffffa059709a>] nested_vmx_vmexit+0xa4/0x233 [kvm_intel]
>>> [<ffffffffa0594295>] ? nested_vmx_exit_handled+0x6a/0x39e [kvm_intel]
>>> [<ffffffffa0537931>] ? kvm_apic_has_interrupt+0x80/0xd5 [kvm]
>>> [<ffffffffa05972ec>] vmx_check_nested_events+0xc3/0xd3 [kvm_intel]
>>> [<ffffffffa051ebe9>] inject_pending_event+0xd0/0x16e [kvm]
>>> [<ffffffffa051efa0>] vcpu_enter_guest+0x319/0x704 [kvm]
>>>
>>>If enabling APIC-v, all interrupts to L1 are delivered through APIC-v.
>>>But when L2 is running, external interrupt will casue L1 vmexit with
>>>reason external interrupt. Then L1 will pick up the interrupt through
>>>vmcs12. when L1 ack the interrupt, since the APIC-v is enabled when
>>>L1 is running, so APIC-v hardware still will do vEOI updating. The problem
>>>is that the interrupt is delivered not through APIC-v hardware, this means
>>>SVI/RVI/vPPR are not setting, but hardware required them when doing vEOI
>>>updating. The solution is that, when L1 tried to pick up the interrupt
>>>from vmcs12, then hypervisor will help to update the SVI/RVI/vPPR to make
>>>sure the following vEOI updating and vPPR updating corrently.
>>>
>>>Also, since interrupt is delivered through vmcs12, so APIC-v hardware will
>>>not cleare vIRR and hypervisor need to clear it before L1 running.
>>>
>>>Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
>>>Suggested-by: "Zhang, Yang Z" <yang.z.zhang@intel.com>
>>>Tested-by: Liu, RongrongX <rongrongx.liu@intel.com>
>>>Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
>>>---
>>>v1 -> v2:
>>> * reusing kvm_get_apic_interrupt here (by modifying kvm_cpu_get_interrupt,
>>> apic_set_isr and apic_clear_irr)
>>>
>>> arch/x86/kvm/irq.c | 2 +-
>>> arch/x86/kvm/lapic.c | 52 +++++++++++++++++++++++++++++++++++++++-------------
>>> 2 files changed, 40 insertions(+), 14 deletions(-)
>>>
>>>diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
>>>index bd0da43..a1ec6a5 100644
>>>--- a/arch/x86/kvm/irq.c
>>>+++ b/arch/x86/kvm/irq.c
>>>@@ -108,7 +108,7 @@ int kvm_cpu_get_interrupt(struct kvm_vcpu *v)
>>>
>>> vector = kvm_cpu_get_extint(v);
>>>
>>>- if (kvm_apic_vid_enabled(v->kvm) || vector != -1)
>>>+ if (vector != -1)
>>> return vector; /* PIC */
>>>
>>> return kvm_get_apic_interrupt(v); /* APIC */
>>>diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
>>>index 3855103..08e8a89 100644
>>>--- a/arch/x86/kvm/lapic.c
>>>+++ b/arch/x86/kvm/lapic.c
>>>@@ -352,25 +352,46 @@ static inline int apic_find_highest_irr(struct kvm_lapic *apic)
>>>
>>> static inline void apic_clear_irr(int vec, struct kvm_lapic *apic)
>>> {
>>>- apic->irr_pending = false;
>>>+ struct kvm_vcpu *vcpu;
>>>+
>>>+ vcpu = apic->vcpu;
>>>+
>>> apic_clear_vector(vec, apic->regs + APIC_IRR);
>>>- if (apic_search_irr(apic) != -1)
>>>- apic->irr_pending = true;
>>>+ if (unlikely(kvm_apic_vid_enabled(vcpu->kvm)))
>>>+ /* try to update RVI */
>>>+ kvm_make_request(KVM_REQ_EVENT, vcpu);
>>>+ else {
>>>+ vec = apic_search_irr(apic);
>>>+ apic->irr_pending = (vec != -1);
>>>+ }
>>> }
>>>
>>> static inline void apic_set_isr(int vec, struct kvm_lapic *apic)
>>> {
>>>- /* Note that we never get here with APIC virtualization enabled. */
>>>+ struct kvm_vcpu *vcpu;
>>>+
>>>+ if (__apic_test_and_set_vector(vec, apic->regs + APIC_ISR))
>>>+ return;
>>>+
>>>+ vcpu = apic->vcpu;
>>>
>>>- if (!__apic_test_and_set_vector(vec, apic->regs + APIC_ISR))
>>>- ++apic->isr_count;
>>>- BUG_ON(apic->isr_count > MAX_APIC_VECTOR);
>>> /*
>>>- * ISR (in service register) bit is set when injecting an interrupt.
>>>- * The highest vector is injected. Thus the latest bit set matches
>>>- * the highest bit in ISR.
>>>+ * With APIC virtualization enabled, all caching is disabled
>>>+ * because the processor can modify ISR under the hood. Instead
>>>+ * just set SVI.
>>> */
>>>- apic->highest_isr_cache = vec;
>>>+ if (unlikely(kvm_apic_vid_enabled(vcpu->kvm)))
>>>+ kvm_x86_ops->hwapic_isr_update(vcpu->kvm, vec);
>>>+ else {
>>>+ ++apic->isr_count;
>>>+ BUG_ON(apic->isr_count > MAX_APIC_VECTOR);
>>>+ /*
>>>+ * ISR (in service register) bit is set when injecting an interrupt.
>>>+ * The highest vector is injected. Thus the latest bit set matches
>>>+ * the highest bit in ISR.
>>>+ */
>>>+ apic->highest_isr_cache = vec;
>>>+ }
>>> }
>>>
>>> static inline int apic_find_highest_isr(struct kvm_lapic *apic)
>>>@@ -1627,11 +1648,16 @@ int kvm_get_apic_interrupt(struct kvm_vcpu *vcpu)
>>> int vector = kvm_apic_has_interrupt(vcpu);
>>> struct kvm_lapic *apic = vcpu->arch.apic;
>>>
>>>- /* Note that we never get here with APIC virtualization enabled. */
>>>-
>>> if (vector == -1)
>>> return -1;
>>>
>>>+ /*
>>>+ * We get here even with APIC virtualization enabled, if doing
>>>+ * nested virtualization and L1 runs with the "acknowledge interrupt
>>>+ * on exit" mode. Then we cannot inject the interrupt via RVI,
>>>+ * because the process would deliver it through the IDT.
>>>+ */
>>>+
>>> apic_set_isr(vector, apic);
>>> apic_update_ppr(apic);
>>> apic_clear_irr(vector, apic);
>>>
>>
>>Thanks, this looks good. Felipe, can you test this patch together with
>>http://article.gmane.org/gmane.linux.kernel/1762356/raw please?
>>
>>Paolo
>>
>
>I checked that the bug was still there using the latest version of
>linus' kernel (8e099d1) and it is, then I applied the patches you
>indicated and the problem went away. So those 2 patches fix the
>problem for me.
>
Thanks for your verify.
Regards,
Wanpeng Li
>Best,
>--
>To unsubscribe from this list: send the line "unsubscribe kvm" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2014-08-05 12:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-05 4:42 [PATCH v2 1/2] KVM: nVMX: Fix nested vmexit ack intr before load vmcs01 Wanpeng Li
2014-08-05 4:42 ` [PATCH v2 2/2] KVM: nVMX: fix acknowledge interrupt on exit when APICv is in use Wanpeng Li
2014-08-05 11:04 ` Paolo Bonzini
2014-08-05 12:39 ` Felipe Reyes
2014-08-05 12:44 ` Wanpeng Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140805124420.GA19457@kernel \
--to=wanpeng.li@linux.intel.com \
--cc=bsd@redhat.com \
--cc=davidlohr@hp.com \
--cc=freyes@suse.com \
--cc=gleb@kernel.org \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pbonzini@redhat.com \
--cc=yang.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).