From: Christoph Lameter <cl@linux.com>
To: Tejun Heo <tj@kernel.org>
Cc: akpm@linuxfoundation.org, rostedt@goodmis.org,
linux-kernel@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ralf Baechle <ralf@linux-mips.org>
Subject: [PATCH 21/35] [PATCH 21/36] mips: Replace __get_cpu_var uses
Date: Sun, 17 Aug 2014 12:30:44 -0500 [thread overview]
Message-ID: <20140817173036.188287809@linux.com> (raw)
In-Reply-To: 20140817173023.439660246@linux.com
[-- Attachment #1: 0021-mips-Replace-__get_cpu_var-uses.patch --]
[-- Type: text/plain, Size: 12241 bytes --]
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
---
arch/mips/cavium-octeon/octeon-irq.c | 30 +++++++++++++++---------------
arch/mips/kernel/kprobes.c | 6 +++---
arch/mips/kernel/perf_event_mipsxx.c | 14 +++++++-------
arch/mips/kernel/smp-bmips.c | 2 +-
arch/mips/loongson/loongson-3/smp.c | 6 +++---
5 files changed, 29 insertions(+), 29 deletions(-)
Index: linux/arch/mips/cavium-octeon/octeon-irq.c
===================================================================
--- linux.orig/arch/mips/cavium-octeon/octeon-irq.c
+++ linux/arch/mips/cavium-octeon/octeon-irq.c
@@ -264,13 +264,13 @@ static void octeon_irq_ciu_enable_local(
unsigned long *pen;
unsigned long flags;
union octeon_ciu_chip_data cd;
- raw_spinlock_t *lock = &__get_cpu_var(octeon_irq_ciu_spinlock);
+ raw_spinlock_t *lock = this_cpu_ptr(&octeon_irq_ciu_spinlock);
cd.p = irq_data_get_irq_chip_data(data);
raw_spin_lock_irqsave(lock, flags);
if (cd.s.line == 0) {
- pen = &__get_cpu_var(octeon_irq_ciu0_en_mirror);
+ pen = this_cpu_ptr(&octeon_irq_ciu0_en_mirror);
__set_bit(cd.s.bit, pen);
/*
* Must be visible to octeon_irq_ip{2,3}_ciu() before
@@ -279,7 +279,7 @@ static void octeon_irq_ciu_enable_local(
wmb();
cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2), *pen);
} else {
- pen = &__get_cpu_var(octeon_irq_ciu1_en_mirror);
+ pen = this_cpu_ptr(&octeon_irq_ciu1_en_mirror);
__set_bit(cd.s.bit, pen);
/*
* Must be visible to octeon_irq_ip{2,3}_ciu() before
@@ -296,13 +296,13 @@ static void octeon_irq_ciu_disable_local
unsigned long *pen;
unsigned long flags;
union octeon_ciu_chip_data cd;
- raw_spinlock_t *lock = &__get_cpu_var(octeon_irq_ciu_spinlock);
+ raw_spinlock_t *lock = this_cpu_ptr(&octeon_irq_ciu_spinlock);
cd.p = irq_data_get_irq_chip_data(data);
raw_spin_lock_irqsave(lock, flags);
if (cd.s.line == 0) {
- pen = &__get_cpu_var(octeon_irq_ciu0_en_mirror);
+ pen = this_cpu_ptr(&octeon_irq_ciu0_en_mirror);
__clear_bit(cd.s.bit, pen);
/*
* Must be visible to octeon_irq_ip{2,3}_ciu() before
@@ -311,7 +311,7 @@ static void octeon_irq_ciu_disable_local
wmb();
cvmx_write_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2), *pen);
} else {
- pen = &__get_cpu_var(octeon_irq_ciu1_en_mirror);
+ pen = this_cpu_ptr(&octeon_irq_ciu1_en_mirror);
__clear_bit(cd.s.bit, pen);
/*
* Must be visible to octeon_irq_ip{2,3}_ciu() before
@@ -431,11 +431,11 @@ static void octeon_irq_ciu_enable_local_
if (cd.s.line == 0) {
int index = cvmx_get_core_num() * 2;
- set_bit(cd.s.bit, &__get_cpu_var(octeon_irq_ciu0_en_mirror));
+ set_bit(cd.s.bit, this_cpu_ptr(&octeon_irq_ciu0_en_mirror));
cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
} else {
int index = cvmx_get_core_num() * 2 + 1;
- set_bit(cd.s.bit, &__get_cpu_var(octeon_irq_ciu1_en_mirror));
+ set_bit(cd.s.bit, this_cpu_ptr(&octeon_irq_ciu1_en_mirror));
cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
}
}
@@ -450,11 +450,11 @@ static void octeon_irq_ciu_disable_local
if (cd.s.line == 0) {
int index = cvmx_get_core_num() * 2;
- clear_bit(cd.s.bit, &__get_cpu_var(octeon_irq_ciu0_en_mirror));
+ clear_bit(cd.s.bit, this_cpu_ptr(&octeon_irq_ciu0_en_mirror));
cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
} else {
int index = cvmx_get_core_num() * 2 + 1;
- clear_bit(cd.s.bit, &__get_cpu_var(octeon_irq_ciu1_en_mirror));
+ clear_bit(cd.s.bit, this_cpu_ptr(&octeon_irq_ciu1_en_mirror));
cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
}
}
@@ -1063,7 +1063,7 @@ static void octeon_irq_ip2_ciu(void)
const unsigned long core_id = cvmx_get_core_num();
u64 ciu_sum = cvmx_read_csr(CVMX_CIU_INTX_SUM0(core_id * 2));
- ciu_sum &= __get_cpu_var(octeon_irq_ciu0_en_mirror);
+ ciu_sum &= __this_cpu_read(octeon_irq_ciu0_en_mirror);
if (likely(ciu_sum)) {
int bit = fls64(ciu_sum) - 1;
int irq = octeon_irq_ciu_to_irq[0][bit];
@@ -1080,7 +1080,7 @@ static void octeon_irq_ip3_ciu(void)
{
u64 ciu_sum = cvmx_read_csr(CVMX_CIU_INT_SUM1);
- ciu_sum &= __get_cpu_var(octeon_irq_ciu1_en_mirror);
+ ciu_sum &= __this_cpu_read(octeon_irq_ciu1_en_mirror);
if (likely(ciu_sum)) {
int bit = fls64(ciu_sum) - 1;
int irq = octeon_irq_ciu_to_irq[1][bit];
@@ -1129,10 +1129,10 @@ static void octeon_irq_init_ciu_percpu(v
int coreid = cvmx_get_core_num();
- __get_cpu_var(octeon_irq_ciu0_en_mirror) = 0;
- __get_cpu_var(octeon_irq_ciu1_en_mirror) = 0;
+ __this_cpu_write(octeon_irq_ciu0_en_mirror, 0);
+ __this_cpu_write(octeon_irq_ciu1_en_mirror, 0);
wmb();
- raw_spin_lock_init(&__get_cpu_var(octeon_irq_ciu_spinlock));
+ raw_spin_lock_init(this_cpu_ptr(&octeon_irq_ciu_spinlock));
/*
* Disable All CIU Interrupts. The ones we need will be
* enabled later. Read the SUM register so we know the write
Index: linux/arch/mips/kernel/kprobes.c
===================================================================
--- linux.orig/arch/mips/kernel/kprobes.c
+++ linux/arch/mips/kernel/kprobes.c
@@ -224,7 +224,7 @@ static void save_previous_kprobe(struct
static void restore_previous_kprobe(struct kprobe_ctlblk *kcb)
{
- __get_cpu_var(current_kprobe) = kcb->prev_kprobe.kp;
+ __this_cpu_write(current_kprobe, kcb->prev_kprobe.kp);
kcb->kprobe_status = kcb->prev_kprobe.status;
kcb->kprobe_old_SR = kcb->prev_kprobe.old_SR;
kcb->kprobe_saved_SR = kcb->prev_kprobe.saved_SR;
@@ -234,7 +234,7 @@ static void restore_previous_kprobe(stru
static void set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
struct kprobe_ctlblk *kcb)
{
- __get_cpu_var(current_kprobe) = p;
+ __this_cpu_write(current_kprobe, p);
kcb->kprobe_saved_SR = kcb->kprobe_old_SR = (regs->cp0_status & ST0_IE);
kcb->kprobe_saved_epc = regs->cp0_epc;
}
@@ -385,7 +385,7 @@ static int __kprobes kprobe_handler(stru
ret = 1;
goto no_kprobe;
}
- p = __get_cpu_var(current_kprobe);
+ p = __this_cpu_read(current_kprobe);
if (p->break_handler && p->break_handler(p, regs))
goto ss_probe;
}
Index: linux/arch/mips/kernel/perf_event_mipsxx.c
===================================================================
--- linux.orig/arch/mips/kernel/perf_event_mipsxx.c
+++ linux/arch/mips/kernel/perf_event_mipsxx.c
@@ -340,7 +340,7 @@ static int mipsxx_pmu_alloc_counter(stru
static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
@@ -360,7 +360,7 @@ static void mipsxx_pmu_enable_event(stru
static void mipsxx_pmu_disable_event(int idx)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
unsigned long flags;
WARN_ON(idx < 0 || idx >= mipspmu.num_counters);
@@ -460,7 +460,7 @@ static void mipspmu_stop(struct perf_eve
static int mipspmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
@@ -496,7 +496,7 @@ out:
static void mipspmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
@@ -1275,7 +1275,7 @@ static int __hw_perf_event_init(struct p
static void pause_local_counters(void)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int ctr = mipspmu.num_counters;
unsigned long flags;
@@ -1291,7 +1291,7 @@ static void pause_local_counters(void)
static void resume_local_counters(void)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
int ctr = mipspmu.num_counters;
do {
@@ -1302,7 +1302,7 @@ static void resume_local_counters(void)
static int mipsxx_pmu_handle_shared_irq(void)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
struct perf_sample_data data;
unsigned int counters = mipspmu.num_counters;
u64 counter;
Index: linux/arch/mips/kernel/smp-bmips.c
===================================================================
--- linux.orig/arch/mips/kernel/smp-bmips.c
+++ linux/arch/mips/kernel/smp-bmips.c
@@ -346,7 +346,7 @@ static irqreturn_t bmips43xx_ipi_interru
int action, cpu = irq - IPI0_IRQ;
spin_lock_irqsave(&ipi_lock, flags);
- action = __get_cpu_var(ipi_action_mask);
+ action = __this_cpu_read(ipi_action_mask);
per_cpu(ipi_action_mask, cpu) = 0;
clear_c0_cause(cpu ? C_SW1 : C_SW0);
spin_unlock_irqrestore(&ipi_lock, flags);
Index: linux/arch/mips/loongson/loongson-3/smp.c
===================================================================
--- linux.orig/arch/mips/loongson/loongson-3/smp.c
+++ linux/arch/mips/loongson/loongson-3/smp.c
@@ -299,16 +299,16 @@ static void loongson3_init_secondary(voi
per_cpu(cpu_state, cpu) = CPU_ONLINE;
i = 0;
- __get_cpu_var(core0_c0count) = 0;
+ __this_cpu_write(core0_c0count, 0);
loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
- while (!__get_cpu_var(core0_c0count)) {
+ while (!__this_cpu_read(core0_c0count)) {
i++;
cpu_relax();
}
if (i > MAX_LOOPS)
i = MAX_LOOPS;
- initcount = __get_cpu_var(core0_c0count) + i;
+ initcount = __this_cpu_read(core0_c0count) + i;
write_c0_count(initcount);
}
next prev parent reply other threads:[~2014-08-17 17:31 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-17 17:30 [PATCH 00/35] percpu: Consistent per cpu operations V7 Christoph Lameter
2014-08-17 17:30 ` [PATCH 01/35] [PATCH 02/36] kernel misc: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:04 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 02/35] [PATCH 03/36] time: " Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 03/35] time: Convert a bunch of &__get_cpu_var introduced in the 3.16 merge period Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 04/35] [PATCH 04/36] scheduler: Replace __get_cpu_var with this_cpu_ptr Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 05/35] [PATCH 05/36] block: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:06 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 06/35] [PATCH 06/36] drivers/char/random: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:07 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 07/35] [PATCH 07/36] drivers/cpuidle: Replace __get_cpu_var uses for address calculation Christoph Lameter
2014-08-26 18:07 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 08/35] [PATCH 08/36] drivers/oprofile: " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 09/35] [PATCH 09/36] drivers/clocksource: Replace __get_cpu_var used " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 10/35] [PATCH 10/36] drivers/net/ethernet/tile: Replace __get_cpu_var uses " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 11/35] [PATCH 11/36] watchdog: Replace __raw_get_cpu_var uses Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 12/35] [PATCH 12/36] net: Replace get_cpu_var through this_cpu_ptr Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 13/35] [PATCH 13/36] md: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 14/35] [PATCH 14/36] metag: Replace __get_cpu_var uses for address calculation Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 15/35] [PATCH 15/36] drivers/net/ethernet/tile: __get_cpu_var call introduced in 3.14 Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 16/35] [PATCH 16/36] irqchips: Replace __this_cpu_ptr uses Christoph Lameter
2014-08-26 18:10 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 17/35] [PATCH 17/36] x86: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:10 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 18/35] [PATCH 18/36] uv: Replace __get_cpu_var Christoph Lameter
2014-08-26 18:11 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 19/35] [PATCH 19/36] arm: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-22 17:48 ` Will Deacon
2014-08-26 18:11 ` Tejun Heo
2014-08-26 18:16 ` Will Deacon
2014-08-26 18:19 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 20/35] [PATCH 20/36] MIPS: Replace __get_cpu_var uses in FPU emulator Christoph Lameter
2014-08-26 18:12 ` Tejun Heo
2014-08-17 17:30 ` Christoph Lameter [this message]
2014-08-26 18:12 ` [PATCH 21/35] [PATCH 21/36] mips: Replace __get_cpu_var uses Tejun Heo
2014-08-17 17:30 ` [PATCH 22/35] [PATCH 22/36] s390: " Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 23/35] [PATCH 23/36] s390: cio driver &__get_cpu_var replacements Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 24/35] [PATCH 24/36] ia64: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 25/35] [PATCH 25/36] alpha: Replace __get_cpu_var Christoph Lameter
2014-08-26 18:14 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 26/35] [PATCH 26/36] powerpc: Replace __get_cpu_var uses Christoph Lameter
2014-08-18 2:45 ` Christoph Lameter
2014-08-26 18:14 ` Tejun Heo
2014-12-16 22:07 ` Alexander Graf
2014-12-17 9:43 ` Paolo Bonzini
2014-12-17 15:31 ` Christoph Lameter
2014-08-17 17:30 ` [PATCH 27/35] [PATCH 27/36] tile: " Christoph Lameter
2014-08-26 18:11 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 28/35] [PATCH 28/36] tile: Use this_cpu_ptr() for hardware counters Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 29/35] [PATCH 29/36] blackfin: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 30/35] [PATCH 30/36] avr32: Replace __get_cpu_var with __this_cpu_write Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 31/35] [PATCH 31/36] sparc: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 32/35] [PATCH 32/36] clocksource: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 33/35] [PATCH 34/36] percpu: Remove __this_cpu_ptr Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 34/35] [PATCH 01/36] __get_cpu_var/cpumask_var_t: Resolve ambiguities Christoph Lameter
2014-08-17 17:30 ` [PATCH 35/35] [PATCH 33/36] Remove __get_cpu_var and __raw_get_cpu_var macros [only in 3.17] Christoph Lameter
2014-08-26 18:17 ` [PATCH 00/35] percpu: Consistent per cpu operations V7 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140817173036.188287809@linux.com \
--to=cl@linux.com \
--cc=akpm@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=ralf@linux-mips.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox