From: Christoph Lameter <cl@linux.com>
To: Tejun Heo <tj@kernel.org>
Cc: akpm@linuxfoundation.org, rostedt@goodmis.org,
linux-kernel@vger.kernel.org, Ingo Molnar <mingo@kernel.org>,
Peter Zijlstra <peterz@infradead.org>,
Thomas Gleixner <tglx@linutronix.de>,
Chris Metcalf <cmetcalf@tilera.com>
Subject: [PATCH 27/35] [PATCH 27/36] tile: Replace __get_cpu_var uses
Date: Sun, 17 Aug 2014 12:30:50 -0500 [thread overview]
Message-ID: <20140817173037.126470591@linux.com> (raw)
In-Reply-To: 20140817173023.439660246@linux.com
[-- Attachment #1: 0027-tile-Replace-__get_cpu_var-uses.patch --]
[-- Type: text/plain, Size: 13891 bytes --]
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.
The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e. using a global
register that may be set to the per cpu base.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
---
arch/tile/include/asm/irqflags.h | 4 ++--
arch/tile/include/asm/mmu_context.h | 6 +++---
arch/tile/kernel/irq.c | 14 +++++++-------
arch/tile/kernel/messaging.c | 4 ++--
arch/tile/kernel/process.c | 2 +-
arch/tile/kernel/setup.c | 3 ++-
arch/tile/kernel/single_step.c | 4 ++--
arch/tile/kernel/smp.c | 2 +-
arch/tile/kernel/smpboot.c | 6 +++---
arch/tile/kernel/time.c | 8 ++++----
arch/tile/mm/highmem.c | 2 +-
arch/tile/mm/init.c | 4 ++--
12 files changed, 30 insertions(+), 29 deletions(-)
Index: linux/arch/tile/include/asm/irqflags.h
===================================================================
--- linux.orig/arch/tile/include/asm/irqflags.h
+++ linux/arch/tile/include/asm/irqflags.h
@@ -140,12 +140,12 @@ extern unsigned int debug_smp_processor_
/*
* Read the set of maskable interrupts.
- * We avoid the preemption warning here via __this_cpu_ptr since even
+ * We avoid the preemption warning here via raw_cpu_ptr since even
* if irqs are already enabled, it's harmless to read the wrong cpu's
* enabled mask.
*/
#define arch_local_irqs_enabled() \
- (*__this_cpu_ptr(&interrupts_enabled_mask))
+ (*raw_cpu_ptr(&interrupts_enabled_mask))
/* Re-enable all maskable interrupts. */
#define arch_local_irq_enable() \
Index: linux/arch/tile/include/asm/mmu_context.h
===================================================================
--- linux.orig/arch/tile/include/asm/mmu_context.h
+++ linux/arch/tile/include/asm/mmu_context.h
@@ -84,7 +84,7 @@ static inline void enter_lazy_tlb(struct
* clear any pending DMA interrupts.
*/
if (current->thread.tile_dma_state.enabled)
- install_page_table(mm->pgd, __get_cpu_var(current_asid));
+ install_page_table(mm->pgd, __this_cpu_read(current_asid));
#endif
}
@@ -96,12 +96,12 @@ static inline void switch_mm(struct mm_s
int cpu = smp_processor_id();
/* Pick new ASID. */
- int asid = __get_cpu_var(current_asid) + 1;
+ int asid = __this_cpu_read(current_asid) + 1;
if (asid > max_asid) {
asid = min_asid;
local_flush_tlb();
}
- __get_cpu_var(current_asid) = asid;
+ __this_cpu_write(current_asid, asid);
/* Clear cpu from the old mm, and set it in the new one. */
cpumask_clear_cpu(cpu, mm_cpumask(prev));
Index: linux/arch/tile/kernel/irq.c
===================================================================
--- linux.orig/arch/tile/kernel/irq.c
+++ linux/arch/tile/kernel/irq.c
@@ -73,7 +73,7 @@ static DEFINE_PER_CPU(int, irq_depth);
*/
void tile_dev_intr(struct pt_regs *regs, int intnum)
{
- int depth = __get_cpu_var(irq_depth)++;
+ int depth = __this_cpu_inc_return(irq_depth);
unsigned long original_irqs;
unsigned long remaining_irqs;
struct pt_regs *old_regs;
@@ -120,7 +120,7 @@ void tile_dev_intr(struct pt_regs *regs,
/* Count device irqs; Linux IPIs are counted elsewhere. */
if (irq != IRQ_RESCHEDULE)
- __get_cpu_var(irq_stat).irq_dev_intr_count++;
+ __this_cpu_inc(irq_stat.irq_dev_intr_count);
generic_handle_irq(irq);
}
@@ -130,10 +130,10 @@ void tile_dev_intr(struct pt_regs *regs,
* including any that were reenabled during interrupt
* handling.
*/
- if (depth == 0)
- unmask_irqs(~__get_cpu_var(irq_disable_mask));
+ if (depth == 1)
+ unmask_irqs(~__this_cpu_read(irq_disable_mask));
- __get_cpu_var(irq_depth)--;
+ __this_cpu_dec(irq_depth);
/*
* Track time spent against the current process again and
@@ -151,7 +151,7 @@ void tile_dev_intr(struct pt_regs *regs,
static void tile_irq_chip_enable(struct irq_data *d)
{
get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq);
- if (__get_cpu_var(irq_depth) == 0)
+ if (__this_cpu_read(irq_depth) == 0)
unmask_irqs(1UL << d->irq);
put_cpu_var(irq_disable_mask);
}
@@ -197,7 +197,7 @@ static void tile_irq_chip_ack(struct irq
*/
static void tile_irq_chip_eoi(struct irq_data *d)
{
- if (!(__get_cpu_var(irq_disable_mask) & (1UL << d->irq)))
+ if (!(__this_cpu_read(irq_disable_mask) & (1UL << d->irq)))
unmask_irqs(1UL << d->irq);
}
Index: linux/arch/tile/kernel/messaging.c
===================================================================
--- linux.orig/arch/tile/kernel/messaging.c
+++ linux/arch/tile/kernel/messaging.c
@@ -28,7 +28,7 @@ static DEFINE_PER_CPU(HV_MsgState, msg_s
void init_messaging(void)
{
/* Allocate storage for messages in kernel space */
- HV_MsgState *state = &__get_cpu_var(msg_state);
+ HV_MsgState *state = this_cpu_ptr(&msg_state);
int rc = hv_register_message_state(state);
if (rc != HV_OK)
panic("hv_register_message_state: error %d", rc);
@@ -96,7 +96,7 @@ void hv_message_intr(struct pt_regs *reg
struct hv_driver_cb *cb =
(struct hv_driver_cb *)him->intarg;
cb->callback(cb, him->intdata);
- __get_cpu_var(irq_stat).irq_hv_msg_count++;
+ __this_cpu_inc(irq_stat.irq_hv_msg_count);
}
}
Index: linux/arch/tile/kernel/process.c
===================================================================
--- linux.orig/arch/tile/kernel/process.c
+++ linux/arch/tile/kernel/process.c
@@ -64,7 +64,7 @@ early_param("idle", idle_setup);
void arch_cpu_idle(void)
{
- __get_cpu_var(irq_stat).idle_timestamp = jiffies;
+ __this_cpu_write(irq_stat.idle_timestamp, jiffies);
_cpu_idle();
}
Index: linux/arch/tile/kernel/setup.c
===================================================================
--- linux.orig/arch/tile/kernel/setup.c
+++ linux/arch/tile/kernel/setup.c
@@ -1218,7 +1218,8 @@ static void __init validate_hv(void)
* various asid variables to their appropriate initial states.
*/
asid_range = hv_inquire_asid(0);
- __get_cpu_var(current_asid) = min_asid = asid_range.start;
+ min_asid = asid_range.start;
+ __this_cpu_write(current_asid, min_asid);
max_asid = asid_range.start + asid_range.size - 1;
if (hv_confstr(HV_CONFSTR_CHIP_MODEL, (HV_VirtAddr)chip_model,
Index: linux/arch/tile/kernel/single_step.c
===================================================================
--- linux.orig/arch/tile/kernel/single_step.c
+++ linux/arch/tile/kernel/single_step.c
@@ -740,7 +740,7 @@ static DEFINE_PER_CPU(unsigned long, ss_
void gx_singlestep_handle(struct pt_regs *regs, int fault_num)
{
- unsigned long *ss_pc = &__get_cpu_var(ss_saved_pc);
+ unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc);
struct thread_info *info = (void *)current_thread_info();
int is_single_step = test_ti_thread_flag(info, TIF_SINGLESTEP);
unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K);
@@ -766,7 +766,7 @@ void gx_singlestep_handle(struct pt_regs
void single_step_once(struct pt_regs *regs)
{
- unsigned long *ss_pc = &__get_cpu_var(ss_saved_pc);
+ unsigned long *ss_pc = this_cpu_ptr(&ss_saved_pc);
unsigned long control = __insn_mfspr(SPR_SINGLE_STEP_CONTROL_K);
*ss_pc = regs->pc;
Index: linux/arch/tile/kernel/smp.c
===================================================================
--- linux.orig/arch/tile/kernel/smp.c
+++ linux/arch/tile/kernel/smp.c
@@ -188,7 +188,7 @@ void flush_icache_range(unsigned long st
/* Called when smp_send_reschedule() triggers IRQ_RESCHEDULE. */
static irqreturn_t handle_reschedule_ipi(int irq, void *token)
{
- __get_cpu_var(irq_stat).irq_resched_count++;
+ __this_cpu_inc(irq_stat.irq_resched_count);
scheduler_ipi();
return IRQ_HANDLED;
Index: linux/arch/tile/kernel/smpboot.c
===================================================================
--- linux.orig/arch/tile/kernel/smpboot.c
+++ linux/arch/tile/kernel/smpboot.c
@@ -41,7 +41,7 @@ void __init smp_prepare_boot_cpu(void)
int cpu = smp_processor_id();
set_cpu_online(cpu, 1);
set_cpu_present(cpu, 1);
- __get_cpu_var(cpu_state) = CPU_ONLINE;
+ __this_cpu_write(cpu_state, CPU_ONLINE);
init_messaging();
}
@@ -158,7 +158,7 @@ static void start_secondary(void)
/* printk(KERN_DEBUG "Initializing CPU#%d\n", cpuid); */
/* Initialize the current asid for our first page table. */
- __get_cpu_var(current_asid) = min_asid;
+ __this_cpu_write(current_asid, min_asid);
/* Set up this thread as another owner of the init_mm */
atomic_inc(&init_mm.mm_count);
@@ -201,7 +201,7 @@ void online_secondary(void)
notify_cpu_starting(smp_processor_id());
set_cpu_online(smp_processor_id(), 1);
- __get_cpu_var(cpu_state) = CPU_ONLINE;
+ __this_cpu_write(cpu_state, CPU_ONLINE);
/* Set up tile-specific state for this cpu. */
setup_cpu(0);
Index: linux/arch/tile/kernel/time.c
===================================================================
--- linux.orig/arch/tile/kernel/time.c
+++ linux/arch/tile/kernel/time.c
@@ -162,7 +162,7 @@ static DEFINE_PER_CPU(struct clock_event
void setup_tile_timer(void)
{
- struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+ struct clock_event_device *evt = this_cpu_ptr(&tile_timer);
/* Fill in fields that are speed-specific. */
clockevents_calc_mult_shift(evt, cycles_per_sec, TILE_MINSEC);
@@ -182,7 +182,7 @@ void setup_tile_timer(void)
void do_timer_interrupt(struct pt_regs *regs, int fault_num)
{
struct pt_regs *old_regs = set_irq_regs(regs);
- struct clock_event_device *evt = &__get_cpu_var(tile_timer);
+ struct clock_event_device *evt = this_cpu_ptr(&tile_timer);
/*
* Mask the timer interrupt here, since we are a oneshot timer
@@ -194,7 +194,7 @@ void do_timer_interrupt(struct pt_regs *
irq_enter();
/* Track interrupt count. */
- __get_cpu_var(irq_stat).irq_timer_count++;
+ __this_cpu_inc(irq_stat.irq_timer_count);
/* Call the generic timer handler */
evt->event_handler(evt);
@@ -235,7 +235,7 @@ cycles_t ns2cycles(unsigned long nsecs)
* We do not have to disable preemption here as each core has the same
* clock frequency.
*/
- struct clock_event_device *dev = &__raw_get_cpu_var(tile_timer);
+ struct clock_event_device *dev = raw_cpu_ptr(&tile_timer);
/*
* as in clocksource.h and x86's timer.h, we split the calculation
Index: linux/arch/tile/mm/highmem.c
===================================================================
--- linux.orig/arch/tile/mm/highmem.c
+++ linux/arch/tile/mm/highmem.c
@@ -103,7 +103,7 @@ static void kmap_atomic_register(struct
spin_lock(&_lock);
/* With interrupts disabled, now fill in the per-cpu info. */
- amp = &__get_cpu_var(amps).per_type[type];
+ amp = this_cpu_ptr(&s.per_type[type]);
amp->page = page;
amp->cpu = smp_processor_id();
amp->va = va;
Index: linux/arch/tile/mm/init.c
===================================================================
--- linux.orig/arch/tile/mm/init.c
+++ linux/arch/tile/mm/init.c
@@ -593,14 +593,14 @@ static void __init kernel_physical_mappi
interrupt_mask_set_mask(-1ULL);
rc = flush_and_install_context(__pa(pgtables),
init_pgprot((unsigned long)pgtables),
- __get_cpu_var(current_asid),
+ __this_cpu_read(current_asid),
cpumask_bits(my_cpu_mask));
interrupt_mask_restore_mask(irqmask);
BUG_ON(rc != 0);
/* Copy the page table back to the normal swapper_pg_dir. */
memcpy(pgd_base, pgtables, sizeof(pgtables));
- __install_page_table(pgd_base, __get_cpu_var(current_asid),
+ __install_page_table(pgd_base, __this_cpu_read(current_asid),
swapper_pgprot);
/*
next prev parent reply other threads:[~2014-08-17 17:31 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-17 17:30 [PATCH 00/35] percpu: Consistent per cpu operations V7 Christoph Lameter
2014-08-17 17:30 ` [PATCH 01/35] [PATCH 02/36] kernel misc: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:04 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 02/35] [PATCH 03/36] time: " Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 03/35] time: Convert a bunch of &__get_cpu_var introduced in the 3.16 merge period Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 04/35] [PATCH 04/36] scheduler: Replace __get_cpu_var with this_cpu_ptr Christoph Lameter
2014-08-26 18:05 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 05/35] [PATCH 05/36] block: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:06 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 06/35] [PATCH 06/36] drivers/char/random: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:07 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 07/35] [PATCH 07/36] drivers/cpuidle: Replace __get_cpu_var uses for address calculation Christoph Lameter
2014-08-26 18:07 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 08/35] [PATCH 08/36] drivers/oprofile: " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 09/35] [PATCH 09/36] drivers/clocksource: Replace __get_cpu_var used " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 10/35] [PATCH 10/36] drivers/net/ethernet/tile: Replace __get_cpu_var uses " Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 11/35] [PATCH 11/36] watchdog: Replace __raw_get_cpu_var uses Christoph Lameter
2014-08-26 18:08 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 12/35] [PATCH 12/36] net: Replace get_cpu_var through this_cpu_ptr Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 13/35] [PATCH 13/36] md: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 14/35] [PATCH 14/36] metag: Replace __get_cpu_var uses for address calculation Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 15/35] [PATCH 15/36] drivers/net/ethernet/tile: __get_cpu_var call introduced in 3.14 Christoph Lameter
2014-08-26 18:09 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 16/35] [PATCH 16/36] irqchips: Replace __this_cpu_ptr uses Christoph Lameter
2014-08-26 18:10 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 17/35] [PATCH 17/36] x86: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:10 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 18/35] [PATCH 18/36] uv: Replace __get_cpu_var Christoph Lameter
2014-08-26 18:11 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 19/35] [PATCH 19/36] arm: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-22 17:48 ` Will Deacon
2014-08-26 18:11 ` Tejun Heo
2014-08-26 18:16 ` Will Deacon
2014-08-26 18:19 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 20/35] [PATCH 20/36] MIPS: Replace __get_cpu_var uses in FPU emulator Christoph Lameter
2014-08-26 18:12 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 21/35] [PATCH 21/36] mips: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:12 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 22/35] [PATCH 22/36] s390: " Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 23/35] [PATCH 23/36] s390: cio driver &__get_cpu_var replacements Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 24/35] [PATCH 24/36] ia64: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:13 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 25/35] [PATCH 25/36] alpha: Replace __get_cpu_var Christoph Lameter
2014-08-26 18:14 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 26/35] [PATCH 26/36] powerpc: Replace __get_cpu_var uses Christoph Lameter
2014-08-18 2:45 ` Christoph Lameter
2014-08-26 18:14 ` Tejun Heo
2014-12-16 22:07 ` Alexander Graf
2014-12-17 9:43 ` Paolo Bonzini
2014-12-17 15:31 ` Christoph Lameter
2014-08-17 17:30 ` Christoph Lameter [this message]
2014-08-26 18:11 ` [PATCH 27/35] [PATCH 27/36] tile: " Tejun Heo
2014-08-17 17:30 ` [PATCH 28/35] [PATCH 28/36] tile: Use this_cpu_ptr() for hardware counters Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 29/35] [PATCH 29/36] blackfin: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 30/35] [PATCH 30/36] avr32: Replace __get_cpu_var with __this_cpu_write Christoph Lameter
2014-08-26 18:15 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 31/35] [PATCH 31/36] sparc: Replace __get_cpu_var uses Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 32/35] [PATCH 32/36] clocksource: Replace __this_cpu_ptr with raw_cpu_ptr Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 33/35] [PATCH 34/36] percpu: Remove __this_cpu_ptr Christoph Lameter
2014-08-26 18:16 ` Tejun Heo
2014-08-17 17:30 ` [PATCH 34/35] [PATCH 01/36] __get_cpu_var/cpumask_var_t: Resolve ambiguities Christoph Lameter
2014-08-17 17:30 ` [PATCH 35/35] [PATCH 33/36] Remove __get_cpu_var and __raw_get_cpu_var macros [only in 3.17] Christoph Lameter
2014-08-26 18:17 ` [PATCH 00/35] percpu: Consistent per cpu operations V7 Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140817173037.126470591@linux.com \
--to=cl@linux.com \
--cc=akpm@linuxfoundation.org \
--cc=cmetcalf@tilera.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=peterz@infradead.org \
--cc=rostedt@goodmis.org \
--cc=tglx@linutronix.de \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox