Re: [alsa-devel] [PATCH v2 1/2] mfd: arizona: Add support for INn_Mode register control

[Lee Jones <lee.jones@linaro.org>]

On Wed, 13 Aug 2014, Inha Song wrote:

> Some boards need to set the INn_MODE[1:0] register to change
> the input signal patch. This wlf,inmode property is optional.
> If present values must be specified by the number of
> ARIZONA_MAX_INPUT.
> 
> Example:
>    - wlf,inmode = <2 0 2 0>;	/* IN1, IN3 use DMIC */
> 
> Signed-off-by: Inha Song <ideal.song@samsung.com>
> ---
>  drivers/mfd/arizona-core.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)

This is going to require a DT Ack.

Is [2/2] adding the documentation?  I can't easily go and look because
you send the patch-set unthreaded.  Please thread patch-sets.  See
the man page for `git send-email` for more information.

> diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
> index 10a0cb9..2b68ccd 100644
> --- a/drivers/mfd/arizona-core.c
> +++ b/drivers/mfd/arizona-core.c
> @@ -534,7 +534,7 @@ EXPORT_SYMBOL_GPL(arizona_of_get_named_gpio);
>  static int arizona_of_get_core_pdata(struct arizona *arizona)
>  {
>  	struct arizona_pdata *pdata = &arizona->pdata;
> -	int ret, i;
> +	int ret, i, proplen;
>  
>  	pdata->reset = arizona_of_get_named_gpio(arizona, "wlf,reset", true);
>  
> @@ -560,6 +560,15 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
>  			ret);
>  	}
>  
> +	proplen = of_property_count_u32_elems(arizona->dev->of_node,
> +					      "wlf,inmode");
> +	if (proplen > 0 && proplen <= ARRAY_SIZE(arizona->pdata.inmode)) {
> +		for (i = 0; i < proplen; i++)
> +			of_property_read_u32_index(arizona->dev->of_node,
> +						   "wlf,inmode", i,
> +						    &arizona->pdata.inmode[i]);
> +	}
> +
>  	return 0;
>  }
>  

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog