Re: [PATCH v6 1/5] dt-bindings: Add RK808 device tree bindings document

[Mark Rutland <mark.rutland@arm.com>]

Hi,

On Tue, Aug 26, 2014 at 03:11:28PM +0100, Chris Zhong wrote:
> Add device tree bindings documentation and a header file
> for rockchip's RK808 pmic.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com>
> 
> ---
> 
> Changes in v6:
> Advices by Mark Rutland
> - add description about clock-cells
> Advices by Doug
> - modify description about regulator
> - remove pinctrl description
> 
> Changes in v5:
> Advices by Mark Brown
> - add description about regulator valid name.
> - add a header file "rockchip,rk808".
> 
> Changes in v4:
> Advices by Doug
> - add a "#clock-cells" propertiy
> - update the example
> 
> Changes in v3: None
> Changes in v2: None
> 
>  Documentation/devicetree/bindings/mfd/rk808.txt |  150 +++++++++++++++++++++++
>  include/dt-bindings/clock/rockchip,rk808.h      |   11 ++
>  2 files changed, 161 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
>  create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt b/Documentation/devicetree/bindings/mfd/rk808.txt
> new file mode 100644
> index 0000000..6c39360
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rk808.txt
> @@ -0,0 +1,150 @@
> +RK808 Power Management Integrated Circuit
> +
> +Required properties:
> +- compatible: "rockchip,rk808"
> +- reg: I2C slave address
> +- interrupt-parent: The parent interrupt controller.
> +- interrupts: the interrupt outputs of the controller.
> +- #clock-cells: RK808 has 2 clkout, they are always 32khz,
> +  the value should be 1

When I mentioned the describing the value values before, I meant the
values that the cell in the specifier can take, 0 and 1, possibly
described as mnemnoics with reference to the binding header file.

Apologies if that was unclear.

Thanks,
Mark.