From: Lee Jones <lee.jones@linaro.org>
To: Jaewon Kim <jaewon02.kim@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Samuel Ortiz <sameo@linux.intel.com>,
linux-kernel@vger.kernel.org, linux-input@vger.kernel.org,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: Re: [PATCH 1/3] mfd: max77693: Initialize haptic register map
Date: Thu, 4 Sep 2014 11:31:21 +0100 [thread overview]
Message-ID: <20140904103121.GG1397@lee--X1> (raw)
In-Reply-To: <54083BCB.1000603@samsung.com>
On Thu, 04 Sep 2014, Jaewon Kim wrote:
>
> 2014년 09월 04일 18:06에 Lee Jones 이(가) 쓴 글:
> >On Mon, 01 Sep 2014, Jaewon Kim wrote:
> >
> >>This patch add regmap_haptic initialization to use haptic register map
> >>in haptic device driver.
> >>
> >>Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
> >>Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
> >>---
> >> drivers/mfd/max77693.c | 21 ++++++++++++++++++---
> >> 1 file changed, 18 insertions(+), 3 deletions(-)
> >Acked-by: Lee Jones <lee.jones@linaro.org>
> >
> >Can this patch go in without the Input one?
>
> Yes. There is no problem without Input driver patch.
Once you've split the Documentation patch, I will take them all.
> >>diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
> >>index 249c139..fbfed56 100644
> >>--- a/drivers/mfd/max77693.c
> >>+++ b/drivers/mfd/max77693.c
> >>@@ -144,6 +144,12 @@ static const struct regmap_irq_chip max77693_muic_irq_chip = {
> >> .num_irqs = ARRAY_SIZE(max77693_muic_irqs),
> >> };
> >>
> >>+static const struct regmap_config max77693_regmap_haptic_config = {
> >>+ .reg_bits = 8,
> >>+ .val_bits = 8,
> >>+ .max_register = MAX77693_HAPTIC_REG_END,
> >>+};
> >>+
> >> static int max77693_i2c_probe(struct i2c_client *i2c,
> >> const struct i2c_device_id *id)
> >> {
> >>@@ -193,6 +199,15 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> >> }
> >> i2c_set_clientdata(max77693->haptic, max77693);
> >>
> >>+ max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic,
> >>+ &max77693_regmap_haptic_config);
> >>+ if (IS_ERR(max77693->regmap_haptic)) {
> >>+ ret = PTR_ERR(max77693->regmap_haptic);
> >>+ dev_err(max77693->dev,
> >>+ "failed to initialize haptic register map: %d\n", ret);
> >>+ goto err_regmap;
> >>+ }
> >>+
> >> /*
> >> * Initialize register map for MUIC device because use regmap-muic
> >> * instance of MUIC device when irq of max77693 is initialized
> >>@@ -204,7 +219,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> >> ret = PTR_ERR(max77693->regmap_muic);
> >> dev_err(max77693->dev,
> >> "failed to allocate register map: %d\n", ret);
> >>- goto err_regmap_muic;
> >>+ goto err_regmap;
> >> }
> >>
> >> ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
> >>@@ -214,7 +229,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
> >> &max77693->irq_data_led);
> >> if (ret) {
> >> dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
> >>- goto err_regmap_muic;
> >>+ goto err_regmap;
> >> }
> >>
> >> ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
> >>@@ -265,7 +280,7 @@ err_irq_charger:
> >> regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
> >> err_irq_topsys:
> >> regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
> >>-err_regmap_muic:
> >>+err_regmap:
> >> i2c_unregister_device(max77693->haptic);
> >> err_i2c_haptic:
> >> i2c_unregister_device(max77693->muic);
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-09-04 10:31 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-01 11:14 [PATCH 0/3] Add max77693 haptic driver Jaewon Kim
2014-09-01 11:14 ` [PATCH 1/3] mfd: max77693: Initialize haptic register map Jaewon Kim
2014-09-04 9:06 ` Lee Jones
2014-09-04 10:15 ` Jaewon Kim
2014-09-04 10:31 ` Lee Jones [this message]
2014-09-01 11:14 ` [PATCH 2/3] Input: misc: Add haptic driver on max77693 Jaewon Kim
2014-09-01 11:14 ` [PATCH 3/3] mfd: max77693: add haptic of_compatible in mfd_cell Jaewon Kim
2014-09-04 9:10 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140904103121.GG1397@lee--X1 \
--to=lee.jones@linaro.org \
--cc=cw00.choi@samsung.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jaewon02.kim@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox