From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Boris BREZILLON <boris.brezillon@free-electrons.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>,
Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>,
Andrew Victor <linux@maxim.org.za>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: at91/dt: declare sckc node on at91sam9g45
Date: Thu, 11 Sep 2014 22:54:54 +0200 [thread overview]
Message-ID: <20140911205454.GG3131@piout.net> (raw)
In-Reply-To: <1410257660-8590-1-git-send-email-boris.brezillon@free-electrons.com>
On 09/09/2014 at 12:14:20 +0200, Boris Brezillon wrote :
> Declare the SCKC (Slow Clock Configuration) block and its clks.
> Make use of the clk32k clk instead of slow_osc where appropriate.
>
> Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
> ---
> arch/arm/boot/dts/at91sam9g45.dtsi | 30 ++++++++++++++++++++++++++++--
> 1 file changed, 28 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
> index 9d4d0a1..68a457b 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -159,7 +159,7 @@
> compatible = "atmel,at91rm9200-clk-master";
> #clock-cells = <0>;
> interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
> - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>;
> + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
> atmel,clk-output-range = <0 133333333>;
> atmel,clk-divisors = <1 2 4 3>;
> };
> @@ -175,7 +175,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> interrupt-parent = <&pmc>;
> - clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>;
> + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
>
> prog0: prog0 {
> #clock-cells = <0>;
> @@ -1160,6 +1160,32 @@
> };
> };
>
> + sckc@fffffd50 {
> + compatible = "atmel,at91sam9x5-sckc";
> + reg = <0xfffffd50 0x4>;
> +
> + slow_osc: slow_osc {
> + compatible = "atmel,at91sam9x5-clk-slow-osc";
> + #clock-cells = <0>;
> + atmel,startup-time-usec = <1200000>;
> + clocks = <&slow_xtal>;
> + };
> +
> + slow_rc_osc: slow_rc_osc {
> + compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
> + #clock-cells = <0>;
> + atmel,startup-time-usec = <75>;
> + clock-frequency = <32768>;
> + clock-accuracy = <50000000>;
> + };
> +
> + clk32k: slck {
> + compatible = "atmel,at91sam9x5-clk-slow";
> + #clock-cells = <0>;
> + clocks = <&slow_rc_osc &slow_osc>;
> + };
> + };
> +
> rtc@fffffdb0 {
> compatible = "atmel,at91rm9200-rtc";
> reg = <0xfffffdb0 0x10>;
> --
> 1.9.1
>
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-09-11 20:55 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-09 10:14 [PATCH] ARM: at91/dt: declare sckc node on at91sam9g45 Boris BREZILLON
2014-09-11 20:54 ` Alexandre Belloni [this message]
2014-09-18 15:18 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140911205454.GG3131@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@maxim.org.za \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox