From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757435AbaIRCO6 (ORCPT ); Wed, 17 Sep 2014 22:14:58 -0400 Received: from mail-by2on0111.outbound.protection.outlook.com ([207.46.100.111]:4153 "EHLO na01-by2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757000AbaIRCO4 (ORCPT ); Wed, 17 Sep 2014 22:14:56 -0400 Date: Thu, 18 Sep 2014 10:21:27 +0800 From: Robin Gong To: Mark Rutland CC: "devicetree@vger.kernel.org" , "linux@arm.linux.org.uk" , Pawel Moll , "ijc+devicetree@hellion.org.uk" , "dbaryshkov@gmail.com" , "linux-pm@vger.kernel.org" , "sre@kernel.org" , "linux-kernel@vger.kernel.org" , "robh+dt@kernel.org" , "linux-arm-kernel@lists.infradead.org" , "kernel@pengutronix.de" , "galak@codeaurora.org" , "grant.likely@linaro.org" , "dwmw2@infradead.org" , "shawn.guo@freescale.com" Subject: Re: [PATCH v3 2/3] power: reset: imx-snvs-poweroff: add power off driver for i.mx6 Message-ID: <20140918022125.GA8150@Robin-OptiPlex-780> References: <1410947881-7345-1-git-send-email-b38343@freescale.com> <1410947881-7345-3-git-send-email-b38343@freescale.com> <20140917175244.GC7983@leverpostej> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20140917175244.GC7983@leverpostej> User-Agent: Mutt/1.5.21 (2010-09-15) X-EOPAttributedMessage: 0 X-Forefront-Antispam-Report: CIP:192.88.168.50;CTRY:US;IPV:CAL;IPV:NLI;EFV:NLI;SFV:NSPM;SFS:(10019020)(6009001)(199003)(51704005)(24454002)(189002)(83506001)(76176999)(80022003)(33656002)(79102003)(105606002)(20776003)(47776003)(15975445006)(74502003)(19580395003)(107046002)(92726001)(64706001)(81342003)(4396001)(77982003)(83072002)(19580405001)(23726002)(81542003)(46102003)(44976005)(74662003)(83322001)(99396002)(6806004)(110136001)(106466001)(15202345003)(68736004)(26826002)(76482002)(90102001)(54356999)(50986999)(21056001)(87936001)(84676001)(85852003)(92566001)(104016003)(85306004)(95666004)(97736003)(97756001)(33716001)(102836001)(46406003)(50466002)(230783001)(31966008)(2004002)(42262002);DIR:OUT;SFP:1102;SCL:1;SRVR:DM2PR03MB352;H:tx30smr01.am.freescale.net;FPR:;MLV:ovrnspm;PTR:InfoDomainNonexistent;A:1;MX:1;LANG:en; X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;UriScan:; X-Forefront-PRVS: 033857D0BD Authentication-Results: spf=fail (sender IP is 192.88.168.50) smtp.mailfrom=yibin.gong@freescale.com; X-OriginatorOrg: freescale.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed, Sep 17, 2014 at 06:52:44PM +0100, Mark Rutland wrote: > On Wed, Sep 17, 2014 at 10:57:59AM +0100, Robin Gong wrote: > > This driver register pm_power_off with snvs power off function. If > > your boards NOT use PMIC_ON_REQ to turn on/off external pmic, or use > > other pin to do, please disable the driver in dts, otherwise, your > > pm_power_off maybe overwrote by this driver. > > > > Signed-off-by: Robin Gong > > --- > > .../bindings/power_supply/imx-snvs-poweroff.txt | 23 +++++++ > > drivers/power/reset/Kconfig | 9 +++ > > drivers/power/reset/Makefile | 1 + > > drivers/power/reset/imx-snvs-poweroff.c | 66 ++++++++++++++++++++ > > 4 files changed, 99 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt > > create mode 100644 drivers/power/reset/imx-snvs-poweroff.c > > > > diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt > > new file mode 100644 > > index 0000000..6caf64e > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt > > @@ -0,0 +1,23 @@ > > +i.mx6 Poweroff Driver > > + > > +SNVS_LPCR in SNVS module can power off the whole system by pull > > +PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. > > +If you don't want to use PMIC_ON_REQ as power on/off control, > > +please set status='disabled' to disable this driver. > > + > > +Required Properties: > > +-compatible: "fsl,sec-v4.0-poweroff" > > +-reg: Specifies the physical address of the SNVS_LPCR register > > As you describe above, this is part of the SNVS module. So why does this > need a separate node? > > Surely there should just be a property on the SNVS node that desribers > whether or not this can be used? > > Mark. > Yes, put this function in rtc-snvs make things easier, honestly,this is our way in internal tree. But looks more and more power off driver put in drivers/power /reset,so we decided to add new power off driver. If it is ok to register pm_power_off hook in drivers/rtc/rtc-snvs.c, I can drop this patch. > > + > > +Example: > > + snvs@020cc000 { > > + compatible = "fsl,sec-v4.0-mon", "simple-bus"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0 0x020cc000 0x4000>; > > + ..... > > + snvs-poweroff@38 { > > + compatible = "fsl,sec-v4.0-poweroff"; > > + reg = <0x38 0x4>; > > + }; > > + } > > diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig > > index ca41523..b26c547 100644 > > --- a/drivers/power/reset/Kconfig > > +++ b/drivers/power/reset/Kconfig > > @@ -45,6 +45,15 @@ config POWER_RESET_HISI > > help > > Reboot support for Hisilicon boards. > > > > +config POWER_RESET_IMX > > + bool "IMX6 power-off driver" > > + depends on POWER_RESET && SOC_IMX6 > > + help > > + This driver support power off external PMIC by PMIC_ON_REQ on i.mx6 > > + boards.If you want to use other pin to control external power,please > > + say N here or disable in dts to make sure pm_power_off never be > > + overwrote wrongly by this driver. > > + > > config POWER_RESET_MSM > > bool "Qualcomm MSM power-off driver" > > depends on POWER_RESET && ARCH_QCOM > > diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile > > index a42e70e..2524daf 100644 > > --- a/drivers/power/reset/Makefile > > +++ b/drivers/power/reset/Makefile > > @@ -3,6 +3,7 @@ obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o > > obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o > > obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o > > obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o > > +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o > > obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o > > obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o > > obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o > > diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c > > new file mode 100644 > > index 0000000..d726ac4 > > --- /dev/null > > +++ b/drivers/power/reset/imx-snvs-poweroff.c > > @@ -0,0 +1,66 @@ > > +/* Power off driver for i.mx6 > > + * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved. > > + * > > + * based on msm-poweroff.c > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 and > > + * only version 2 as published by the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + */ > > + > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > +#include > > + > > +static void __iomem *snvs_base; > > + > > +static void do_imx_poweroff(void) > > +{ > > + u32 value = readl(snvs_base); > > + > > + /* set TOP and DP_EN bit */ > > + writel(value | 0x60, snvs_base); > > +} > > + > > +static int imx_poweroff_probe(struct platform_device *pdev) > > +{ > > + snvs_base = of_iomap(pdev->dev.of_node, 0); > > + if (!snvs_base) { > > + dev_err(&pdev->dev, "failed to get memory\n"); > > + return -EIO; > > + } > > + > > + pm_power_off = do_imx_poweroff; > > + return 0; > > +} > > + > > +static const struct of_device_id of_imx_poweroff_match[] = { > > + { .compatible = "fsl,sec-v4.0-poweroff", }, > > + {}, > > +}; > > +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match); > > + > > +static struct platform_driver imx_poweroff_driver = { > > + .probe = imx_poweroff_probe, > > + .driver = { > > + .name = "imx-snvs-poweroff", > > + .of_match_table = of_match_ptr(of_imx_poweroff_match), > > + }, > > +}; > > + > > +static int __init imx_poweroff_init(void) > > +{ > > + return platform_driver_register(&imx_poweroff_driver); > > +} > > +device_initcall(imx_poweroff_init); > > -- > > 1.7.9.5 > > > > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel