From: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: perex@perex.cz, bhelgaas@google.com, benoit.taine@lip6.fr,
arnd@arndb.de, opw-kernel@googlegroups.com,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] sound: pci: pcxhr: convert timeval to ktime_t
Date: Tue, 28 Oct 2014 14:35:11 +0200 [thread overview]
Message-ID: <20141028123511.GA3719@localhost.localdomain> (raw)
In-Reply-To: <s5hsii88kw0.wl-tiwai@suse.de>
On Tue, Oct 28, 2014 at 12:59:59PM +0100, Takashi Iwai wrote:
> At Tue, 28 Oct 2014 13:29:56 +0200,
> Aya Mahfouz wrote:
> >
> > This patch is concerned with migrating the time variables in the pcxhr
> > module found in the sound driver. The changes are concerend with the
> > y2038 problem where timeval will overflow in the year 2038. ktime_t
> > was used instead of timeval to get the wall time. The difference
> > is displayed now in nanoseconds instead of microseconds.
> >
> > Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
> > Reviewed-by: Arnd Bergmann <arnd@arndb.de>
>
> It gets compile errors like below. Please submit a patch at least
> after build testing.
>
I do actually compile all my patches before submitting them. Since
the change is minor I use make M=sound/pci. My second patch is based
on your compile errors. Kindly let me know how do you compile the
patch to avoid breaking your system in the future.
> thanks,
>
> Takashi
>
Kind Regards,
Aya Saif El-yazal Mahfouz
> ===
>
> sound/pci/pcxhr/pcxhr_core.c: In function ‘pcxhr_set_pipe_state’:
> sound/pci/pcxhr/pcxhr_core.c:913:10: error: ‘start’ redeclared as different kind of symbol
> ktime_t start, stop, diff;
> ^
> sound/pci/pcxhr/pcxhr_core.c:907:27: note: previous definition of ‘start’ was here
> int capture_mask, int start)
> ^
> In file included from include/linux/printk.h:260:0,
> from include/linux/kernel.h:13,
> from include/linux/delay.h:10,
> from sound/pci/pcxhr/pcxhr_core.c:23:
> sound/pci/pcxhr/pcxhr_core.c:923:13: error: used union type value where scalar is required
> start ? "START" : "STOP", audio_mask, state);
> ^
> include/linux/dynamic_debug.h:87:9: note: in definition of macro ‘dynamic_dev_dbg’
> ##__VA_ARGS__); \
> ^
> sound/pci/pcxhr/pcxhr_core.c:921:2: note: in expansion of macro ‘dev_dbg’
> dev_dbg(&mgr->pci->dev,
> ^
> sound/pci/pcxhr/pcxhr_core.c:924:6: error: used union type value where scalar is required
> if (start) {
> ^
> sound/pci/pcxhr/pcxhr_core.c:950:38: error: used union type value where scalar is required
> if ((state & audio_mask) == (start ? audio_mask : 0))
> ^
> sound/pci/pcxhr/pcxhr_core.c:958:6: error: wrong type argument to unary exclamation mark
> if (!start) {
> ^
> scripts/Makefile.build:257: recipe for target 'sound/pci/pcxhr/pcxhr_core.o' failed
>
>
> > ---
> > sound/pci/pcxhr/pcxhr.c | 10 ++++++----
> > sound/pci/pcxhr/pcxhr_core.c | 10 ++++++----
> > 2 files changed, 12 insertions(+), 8 deletions(-)
> >
> > diff --git a/sound/pci/pcxhr/pcxhr.c b/sound/pci/pcxhr/pcxhr.c
> > index b854fc5..3f4607c 100644
> > --- a/sound/pci/pcxhr/pcxhr.c
> > +++ b/sound/pci/pcxhr/pcxhr.c
> > @@ -711,8 +711,9 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
> > int playback_mask = 0;
> >
> > #ifdef CONFIG_SND_DEBUG_VERBOSE
> > - struct timeval my_tv1, my_tv2;
> > - do_gettimeofday(&my_tv1);
> > + ktime_t start, stop, diff;
> > +
> > + start = ktime_get();
> > #endif
> > mutex_lock(&mgr->setup_mutex);
> >
> > @@ -823,9 +824,10 @@ static void pcxhr_start_linked_stream(struct pcxhr_mgr *mgr)
> > mutex_unlock(&mgr->setup_mutex);
> >
> > #ifdef CONFIG_SND_DEBUG_VERBOSE
> > - do_gettimeofday(&my_tv2);
> > + stop = ktime_get();
> > + diff = ktime_sub(stop, start);
> > dev_dbg(&mgr->pci->dev, "***TRIGGER START*** TIME = %ld (err = %x)\n",
> > - (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
> > + (long)(ktime_to_ns(diff)), err);
> > #endif
> > }
> >
> > diff --git a/sound/pci/pcxhr/pcxhr_core.c b/sound/pci/pcxhr/pcxhr_core.c
> > index a584acb..be3c003 100644
> > --- a/sound/pci/pcxhr/pcxhr_core.c
> > +++ b/sound/pci/pcxhr/pcxhr_core.c
> > @@ -910,8 +910,9 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
> > int audio_mask;
> >
> > #ifdef CONFIG_SND_DEBUG_VERBOSE
> > - struct timeval my_tv1, my_tv2;
> > - do_gettimeofday(&my_tv1);
> > + ktime_t start, stop, diff;
> > +
> > + start = ktime_get();
> > #endif
> > audio_mask = (playback_mask |
> > (capture_mask << PCXHR_PIPE_STATE_CAPTURE_OFFSET));
> > @@ -960,9 +961,10 @@ int pcxhr_set_pipe_state(struct pcxhr_mgr *mgr, int playback_mask,
> > return err;
> > }
> > #ifdef CONFIG_SND_DEBUG_VERBOSE
> > - do_gettimeofday(&my_tv2);
> > + stop = ktime_get();
> > + diff = ktime_sub(stop, start);
> > dev_dbg(&mgr->pci->dev, "***SET PIPE STATE*** TIME = %ld (err = %x)\n",
> > - (long)(my_tv2.tv_usec - my_tv1.tv_usec), err);
> > + (long)(ktime_to_ns(diff)), err);
> > #endif
> > return 0;
> > }
> > --
> > 1.9.3
> >
next prev parent reply other threads:[~2014-10-28 12:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 11:29 [PATCH] sound: pci: pcxhr: convert timeval to ktime_t Aya Mahfouz
2014-10-28 11:59 ` Takashi Iwai
2014-10-28 12:35 ` Aya Mahfouz [this message]
2014-10-28 12:41 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141028123511.GA3719@localhost.localdomain \
--to=mahfouz.saif.elyazal@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=arnd@arndb.de \
--cc=benoit.taine@lip6.fr \
--cc=bhelgaas@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=opw-kernel@googlegroups.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox