Re: [PATCH v7 0/7] usb: add support for the generic PHY framework

Peter Chen
2014-10-29T03:33:13Z

On Tue, Oct 28, 2014 at 05:35:34PM +0100, Antoine Tenart wrote:
> The series can be found at:
> git://git.free-electrons.com:users/antoine-tenart/linux.git usb-phy
>
> Changes since v6:
> - rebased on top of v3.18-rc2
>
> Changes since v5:
> - rebased on the latest version of Sergei's series[1]
> - fixed one modifiaction made in the wrong patch
>
> Changes since v4:
> - reworked the PHY handling in ci_hdrc_probe()
> - fixed a rebase error
>
> Changes since v3:
> - moved phy_exit() after phy_power_on()
> - fixed the PHY handling in ci_hdrc_probe()
> - some little fixes
>
> Changes since v2:
> - rebased the series on top of v3.17-rc1
> - switched to devm_phy_get() to handle non DT cases
> - moved usb_otg into the ci_hdrc structure
>
> Changes since v1:
> - rebased the series on top of [2] (generic PHY support for HCD)
> - split s/phy/usb_phy/ renaming and generic PHY support in separate
> patches
>
> [1] https://www.mail-archive.com/linux-usb%40vger.kernel.org/msg48068.html
>
> Antoine Tenart (7):
> usb: move the OTG state from the USB PHY to the OTG structure
> usb: rename phy to usb_phy in OTG
> usb: add support to the generic PHY framework in OTG
> usb: allow to supply the PHY in the drivers when using HCD
> usb: rename transceiver and phy to usb_phy in ChipIdea
> usb: chipidea: move usb_otg into struct ci_hdrc
> usb: chipidea: add support to the generic PHY framework in ChipIdea
>
> drivers/phy/phy-omap-usb2.c | 14 ++----
> drivers/usb/chipidea/ci.h | 8 +++-
> drivers/usb/chipidea/ci_hdrc_imx.c | 2 +-
> drivers/usb/chipidea/ci_hdrc_msm.c | 8 ++--
> drivers/usb/chipidea/core.c | 89 ++++++++++++++++++++++++++--------
> drivers/usb/chipidea/debug.c | 2 +-
> drivers/usb/chipidea/host.c | 10 ++--
> drivers/usb/chipidea/otg_fsm.c | 30 +++++-------
> drivers/usb/chipidea/udc.c | 4 +-
> drivers/usb/common/usb-otg-fsm.c | 8 ++--
> drivers/usb/core/hcd.c | 7 +--
> drivers/usb/host/ohci-omap.c | 2 +-
> drivers/usb/musb/am35x.c | 28 +++++------
> drivers/usb/musb/blackfin.c | 18 +++----
> drivers/usb/musb/da8xx.c | 28 +++++------
> drivers/usb/musb/davinci.c | 18 +++----
> drivers/usb/musb/musb_core.c | 94 ++++++++++++++++++------------------
> drivers/usb/musb/musb_dsps.c | 26 +++++-----
> drivers/usb/musb/musb_gadget.c | 36 +++++++-------
> drivers/usb/musb/musb_host.c | 8 ++--
> drivers/usb/musb/musb_virthub.c | 22 ++++-----
> drivers/usb/musb/omap2430.c | 30 ++++++------
> drivers/usb/musb/tusb6010.c | 40 ++++++++--------
> drivers/usb/musb/ux500.c | 10 ++--
> drivers/usb/phy/phy-ab8500-usb.c | 16 +++----
> drivers/usb/phy/phy-fsl-usb.c | 23 ++++-----
> drivers/usb/phy/phy-generic.c | 6 +--
> drivers/usb/phy/phy-gpio-vbus-usb.c | 14 +++---
> drivers/usb/phy/phy-isp1301-omap.c | 10 ++--
> drivers/usb/phy/phy-msm-usb.c | 95 +++++++++++++++++++------------------
> drivers/usb/phy/phy-mv-usb.c | 50 +++++++++----------
> drivers/usb/phy/phy-tahvo.c | 8 ++--
> drivers/usb/phy/phy-ulpi.c | 6 +--
> include/linux/usb/chipidea.h | 4 +-
> include/linux/usb/otg.h | 7 ++-
> include/linux/usb/phy.h | 1 -
> 36 files changed, 420 insertions(+), 362 deletions(-)
>
> --
> 1.9.1
>

Tested the whole patch set at imx6 hardware, and you can add
my Acked-by to the last three chipidea patches.

I hope your patch-set can be queued soon, since I find the rebase
error with my next tree, I can put your patches on the top.

--
Best Regards,
Peter Chen