From: Lee Jones <lee.jones@linaro.org>
To: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] mfd: tc3589x: get rid of static base
Date: Mon, 3 Nov 2014 17:58:51 +0000 [thread overview]
Message-ID: <20141103175851.GU12011@x1> (raw)
In-Reply-To: <1414490816-13574-1-git-send-email-linus.walleij@linaro.org>
On Tue, 28 Oct 2014, Linus Walleij wrote:
> The TC3589x driver is now a device tree-only driver, so we want
> only dynamic IRQs and GPIO numbers from the tc3589x, no static
> assignments.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> drivers/gpio/gpio-tc3589x.c | 2 +-
> drivers/mfd/tc3589x.c | 9 +++------
> include/linux/mfd/tc3589x.h | 8 --------
> 3 files changed, 4 insertions(+), 15 deletions(-)
Acked-by: Lee Jones <lee.jones@linaro.org>
How would you like me to handle this patch?
ib-mfd-gpio?
> diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c
> index ae0f6466eb09..abdcf58935f5 100644
> --- a/drivers/gpio/gpio-tc3589x.c
> +++ b/drivers/gpio/gpio-tc3589x.c
> @@ -262,7 +262,7 @@ static int tc3589x_gpio_probe(struct platform_device *pdev)
> tc3589x_gpio->chip = template_chip;
> tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
> tc3589x_gpio->chip.dev = &pdev->dev;
> - tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
> + tc3589x_gpio->chip.base = -1;
>
> #ifdef CONFIG_OF_GPIO
> tc3589x_gpio->chip.of_node = np;
> diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
> index 0072e668c208..aacb3720065c 100644
> --- a/drivers/mfd/tc3589x.c
> +++ b/drivers/mfd/tc3589x.c
> @@ -241,10 +241,8 @@ static struct irq_domain_ops tc3589x_irq_ops = {
>
> static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np)
> {
> - int base = tc3589x->irq_base;
> -
> tc3589x->domain = irq_domain_add_simple(
> - np, TC3589x_NR_INTERNAL_IRQS, base,
> + np, TC3589x_NR_INTERNAL_IRQS, 0,
> &tc3589x_irq_ops, tc3589x);
>
> if (!tc3589x->domain) {
> @@ -298,7 +296,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
> if (blocks & TC3589x_BLOCK_GPIO) {
> ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
> ARRAY_SIZE(tc3589x_dev_gpio), NULL,
> - tc3589x->irq_base, tc3589x->domain);
> + 0, tc3589x->domain);
> if (ret) {
> dev_err(tc3589x->dev, "failed to add gpio child\n");
> return ret;
> @@ -309,7 +307,7 @@ static int tc3589x_device_init(struct tc3589x *tc3589x)
> if (blocks & TC3589x_BLOCK_KEYPAD) {
> ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
> ARRAY_SIZE(tc3589x_dev_keypad), NULL,
> - tc3589x->irq_base, tc3589x->domain);
> + 0, tc3589x->domain);
> if (ret) {
> dev_err(tc3589x->dev, "failed to keypad child\n");
> return ret;
> @@ -404,7 +402,6 @@ static int tc3589x_probe(struct i2c_client *i2c,
> tc3589x->dev = &i2c->dev;
> tc3589x->i2c = i2c;
> tc3589x->pdata = pdata;
> - tc3589x->irq_base = pdata->irq_base;
>
> switch (version) {
> case TC3589X_TC35893:
> diff --git a/include/linux/mfd/tc3589x.h b/include/linux/mfd/tc3589x.h
> index e6088c2e2092..e1c12d84c26a 100644
> --- a/include/linux/mfd/tc3589x.h
> +++ b/include/linux/mfd/tc3589x.h
> @@ -164,13 +164,10 @@ struct tc3589x_keypad_platform_data {
>
> /**
> * struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
> - * @gpio_base: first gpio number assigned to TC3589x. A maximum of
> - * %TC3589x_NR_GPIOS GPIOs will be allocated.
> * @setup: callback for board-specific initialization
> * @remove: callback for board-specific teardown
> */
> struct tc3589x_gpio_platform_data {
> - int gpio_base;
> void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
> void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
> };
> @@ -178,18 +175,13 @@ struct tc3589x_gpio_platform_data {
> /**
> * struct tc3589x_platform_data - TC3589x platform data
> * @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
> - * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
> * @gpio: GPIO-specific platform data
> * @keypad: keypad-specific platform data
> */
> struct tc3589x_platform_data {
> unsigned int block;
> - int irq_base;
> struct tc3589x_gpio_platform_data *gpio;
> const struct tc3589x_keypad_platform_data *keypad;
> };
>
> -#define TC3589x_NR_GPIOS 24
> -#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
> -
> #endif
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2014-11-03 17:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-28 10:06 [PATCH] mfd: tc3589x: get rid of static base Linus Walleij
2014-11-03 17:58 ` Lee Jones [this message]
2014-11-04 10:06 ` Linus Walleij
2014-11-10 15:29 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141103175851.GU12011@x1 \
--to=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox