* [PATCH] usb: musb: replace hard coded registers with defines
@ 2014-10-27 20:48 Roman Byshko
2014-11-03 16:08 ` Felipe Balbi
0 siblings, 1 reply; 5+ messages in thread
From: Roman Byshko @ 2014-10-27 20:48 UTC (permalink / raw)
To: Felipe Balbi; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel
musb registers can be dumped using the file regdump
which is created in debugfs. Up to now hard coded
register addresses are used for that. Different glue
layers however have different register addresses. The
patch addresses this issue by substituting bare register
addresses with defines.
---
drivers/usb/musb/musb_debugfs.c | 57 ++++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c21679..ad3701a 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -49,33 +49,36 @@ struct musb_register_map {
};
static const struct musb_register_map musb_regmap[] = {
- { "FAddr", 0x00, 8 },
- { "Power", 0x01, 8 },
- { "Frame", 0x0c, 16 },
- { "Index", 0x0e, 8 },
- { "Testmode", 0x0f, 8 },
- { "TxMaxPp", 0x10, 16 },
- { "TxCSRp", 0x12, 16 },
- { "RxMaxPp", 0x14, 16 },
- { "RxCSR", 0x16, 16 },
- { "RxCount", 0x18, 16 },
- { "ConfigData", 0x1f, 8 },
- { "DevCtl", 0x60, 8 },
- { "MISC", 0x61, 8 },
- { "TxFIFOsz", 0x62, 8 },
- { "RxFIFOsz", 0x63, 8 },
- { "TxFIFOadd", 0x64, 16 },
- { "RxFIFOadd", 0x66, 16 },
- { "VControl", 0x68, 32 },
- { "HWVers", 0x6C, 16 },
- { "EPInfo", 0x78, 8 },
- { "RAMInfo", 0x79, 8 },
- { "LinkInfo", 0x7A, 8 },
- { "VPLen", 0x7B, 8 },
- { "HS_EOF1", 0x7C, 8 },
- { "FS_EOF1", 0x7D, 8 },
- { "LS_EOF1", 0x7E, 8 },
- { "SOFT_RST", 0x7F, 8 },
+ { "FAddr", MUSB_FADDR, 8 },
+ { "Power", MUSB_POWER, 8 },
+ { "Frame", MUSB_FRAME, 16 },
+ { "Index", MUSB_INDEX, 8 },
+ { "Testmode", MUSB_TESTMODE, 8 },
+ { "TxMaxPp", MUSB_TXMAXP, 16 },
+ { "TxCSRp", MUSB_TXCSR, 16 },
+ { "RxMaxPp", MUSB_RXMAXP, 16 },
+ { "RxCSR", MUSB_RXCSR, 16 },
+ { "RxCount", MUSB_RXCOUNT, 16 },
+ { "ConfigData", MUSB_CONFIGDATA,8 },
+ { "IntrRxE", MUSB_INTRRXE, 16 },
+ { "IntrTxE", MUSB_INTRTXE, 16 },
+ { "IntrUsbE", MUSB_INTRUSBE, 8 },
+ { "DevCtl", MUSB_DEVCTL, 8 },
+ { "BabbleCtl", MUSB_BABBLE_CTL,8 },
+ { "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
+ { "RxFIFOsz", MUSB_RXFIFOSZ, 8 },
+ { "TxFIFOadd", MUSB_TXFIFOADD, 16 },
+ { "RxFIFOadd", MUSB_RXFIFOADD, 16 },
+ { "VControl", 0x68, 32 },
+ { "HWVers", 0x69, 16 },
+ { "EPInfo", MUSB_EPINFO, 8 },
+ { "RAMInfo", MUSB_RAMINFO, 8 },
+ { "LinkInfo", MUSB_LINKINFO, 8 },
+ { "VPLen", MUSB_VPLEN, 8 },
+ { "HS_EOF1", MUSB_HS_EOF1, 8 },
+ { "FS_EOF1", MUSB_FS_EOF1, 8 },
+ { "LS_EOF1", MUSB_LS_EOF1, 8 },
+ { "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
{ "DMA_ADDRch0", 0x208, 32 },
{ "DMA_COUNTch0", 0x20C, 32 },
--
2.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] usb: musb: replace hard coded registers with defines
2014-10-27 20:48 [PATCH] usb: musb: replace hard coded registers with defines Roman Byshko
@ 2014-11-03 16:08 ` Felipe Balbi
2014-11-10 18:31 ` Roman Byshko
0 siblings, 1 reply; 5+ messages in thread
From: Felipe Balbi @ 2014-11-03 16:08 UTC (permalink / raw)
To: Roman Byshko; +Cc: Felipe Balbi, Greg Kroah-Hartman, linux-usb, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 433 bytes --]
On Mon, Oct 27, 2014 at 09:48:39PM +0100, Roman Byshko wrote:
> musb registers can be dumped using the file regdump
> which is created in debugfs. Up to now hard coded
> register addresses are used for that. Different glue
> layers however have different register addresses. The
> patch addresses this issue by substituting bare register
> addresses with defines.
missing Signed-off-by, can't accept. Sorry.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] usb: musb: replace hard coded registers with defines
2014-11-03 16:08 ` Felipe Balbi
@ 2014-11-10 18:31 ` Roman Byshko
2014-11-10 19:40 ` Felipe Balbi
0 siblings, 1 reply; 5+ messages in thread
From: Roman Byshko @ 2014-11-10 18:31 UTC (permalink / raw)
To: Felipe Balbi; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel
musb registers can be dumped using the file regdump
which is created in debugfs. Up to now hard coded
register addresses are used for that. Different glue
layers however have different register addresses. The
patch addresses this issue by substituting bare register
addresses with defines.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
---
drivers/usb/musb/musb_debugfs.c | 57 ++++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c21679..ad3701a 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -49,33 +49,36 @@ struct musb_register_map {
};
static const struct musb_register_map musb_regmap[] = {
- { "FAddr", 0x00, 8 },
- { "Power", 0x01, 8 },
- { "Frame", 0x0c, 16 },
- { "Index", 0x0e, 8 },
- { "Testmode", 0x0f, 8 },
- { "TxMaxPp", 0x10, 16 },
- { "TxCSRp", 0x12, 16 },
- { "RxMaxPp", 0x14, 16 },
- { "RxCSR", 0x16, 16 },
- { "RxCount", 0x18, 16 },
- { "ConfigData", 0x1f, 8 },
- { "DevCtl", 0x60, 8 },
- { "MISC", 0x61, 8 },
- { "TxFIFOsz", 0x62, 8 },
- { "RxFIFOsz", 0x63, 8 },
- { "TxFIFOadd", 0x64, 16 },
- { "RxFIFOadd", 0x66, 16 },
- { "VControl", 0x68, 32 },
- { "HWVers", 0x6C, 16 },
- { "EPInfo", 0x78, 8 },
- { "RAMInfo", 0x79, 8 },
- { "LinkInfo", 0x7A, 8 },
- { "VPLen", 0x7B, 8 },
- { "HS_EOF1", 0x7C, 8 },
- { "FS_EOF1", 0x7D, 8 },
- { "LS_EOF1", 0x7E, 8 },
- { "SOFT_RST", 0x7F, 8 },
+ { "FAddr", MUSB_FADDR, 8 },
+ { "Power", MUSB_POWER, 8 },
+ { "Frame", MUSB_FRAME, 16 },
+ { "Index", MUSB_INDEX, 8 },
+ { "Testmode", MUSB_TESTMODE, 8 },
+ { "TxMaxPp", MUSB_TXMAXP, 16 },
+ { "TxCSRp", MUSB_TXCSR, 16 },
+ { "RxMaxPp", MUSB_RXMAXP, 16 },
+ { "RxCSR", MUSB_RXCSR, 16 },
+ { "RxCount", MUSB_RXCOUNT, 16 },
+ { "ConfigData", MUSB_CONFIGDATA,8 },
+ { "IntrRxE", MUSB_INTRRXE, 16 },
+ { "IntrTxE", MUSB_INTRTXE, 16 },
+ { "IntrUsbE", MUSB_INTRUSBE, 8 },
+ { "DevCtl", MUSB_DEVCTL, 8 },
+ { "BabbleCtl", MUSB_BABBLE_CTL,8 },
+ { "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
+ { "RxFIFOsz", MUSB_RXFIFOSZ, 8 },
+ { "TxFIFOadd", MUSB_TXFIFOADD, 16 },
+ { "RxFIFOadd", MUSB_RXFIFOADD, 16 },
+ { "VControl", 0x68, 32 },
+ { "HWVers", 0x69, 16 },
+ { "EPInfo", MUSB_EPINFO, 8 },
+ { "RAMInfo", MUSB_RAMINFO, 8 },
+ { "LinkInfo", MUSB_LINKINFO, 8 },
+ { "VPLen", MUSB_VPLEN, 8 },
+ { "HS_EOF1", MUSB_HS_EOF1, 8 },
+ { "FS_EOF1", MUSB_FS_EOF1, 8 },
+ { "LS_EOF1", MUSB_LS_EOF1, 8 },
+ { "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
{ "DMA_ADDRch0", 0x208, 32 },
{ "DMA_COUNTch0", 0x20C, 32 },
--
2.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH] usb: musb: replace hard coded registers with defines
2014-11-10 18:31 ` Roman Byshko
@ 2014-11-10 19:40 ` Felipe Balbi
2014-11-10 20:53 ` Roman Byshko
0 siblings, 1 reply; 5+ messages in thread
From: Felipe Balbi @ 2014-11-10 19:40 UTC (permalink / raw)
To: Roman Byshko; +Cc: Felipe Balbi, Greg Kroah-Hartman, linux-usb, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 551 bytes --]
On Mon, Nov 10, 2014 at 07:31:23PM +0100, Roman Byshko wrote:
> musb registers can be dumped using the file regdump
> which is created in debugfs. Up to now hard coded
> register addresses are used for that. Different glue
> layers however have different register addresses. The
> patch addresses this issue by substituting bare register
> addresses with defines.
>
> Signed-off-by: Roman Byshko <rbyshko@gmail.com>
TABs were converted into spaces, please fix and rebase on my
testing/next. Make sure TABs remain as TABs.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] usb: musb: replace hard coded registers with defines
2014-11-10 19:40 ` Felipe Balbi
@ 2014-11-10 20:53 ` Roman Byshko
0 siblings, 0 replies; 5+ messages in thread
From: Roman Byshko @ 2014-11-10 20:53 UTC (permalink / raw)
To: Felipe Balbi; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel
musb registers can be dumped using the file regdump
which is created in debugfs. Up to now hard coded
register addresses are used for that. Different glue
layers however have different register addresses. The
patch addresses this issue by substituting bare register
addresses with defines.
Signed-off-by: Roman Byshko <rbyshko@gmail.com>
---
drivers/usb/musb/musb_debugfs.c | 57 ++++++++++++++++++++++-------------------
1 file changed, 30 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index 4c21679..ad3701a 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -49,33 +49,36 @@ struct musb_register_map {
};
static const struct musb_register_map musb_regmap[] = {
- { "FAddr", 0x00, 8 },
- { "Power", 0x01, 8 },
- { "Frame", 0x0c, 16 },
- { "Index", 0x0e, 8 },
- { "Testmode", 0x0f, 8 },
- { "TxMaxPp", 0x10, 16 },
- { "TxCSRp", 0x12, 16 },
- { "RxMaxPp", 0x14, 16 },
- { "RxCSR", 0x16, 16 },
- { "RxCount", 0x18, 16 },
- { "ConfigData", 0x1f, 8 },
- { "DevCtl", 0x60, 8 },
- { "MISC", 0x61, 8 },
- { "TxFIFOsz", 0x62, 8 },
- { "RxFIFOsz", 0x63, 8 },
- { "TxFIFOadd", 0x64, 16 },
- { "RxFIFOadd", 0x66, 16 },
- { "VControl", 0x68, 32 },
- { "HWVers", 0x6C, 16 },
- { "EPInfo", 0x78, 8 },
- { "RAMInfo", 0x79, 8 },
- { "LinkInfo", 0x7A, 8 },
- { "VPLen", 0x7B, 8 },
- { "HS_EOF1", 0x7C, 8 },
- { "FS_EOF1", 0x7D, 8 },
- { "LS_EOF1", 0x7E, 8 },
- { "SOFT_RST", 0x7F, 8 },
+ { "FAddr", MUSB_FADDR, 8 },
+ { "Power", MUSB_POWER, 8 },
+ { "Frame", MUSB_FRAME, 16 },
+ { "Index", MUSB_INDEX, 8 },
+ { "Testmode", MUSB_TESTMODE, 8 },
+ { "TxMaxPp", MUSB_TXMAXP, 16 },
+ { "TxCSRp", MUSB_TXCSR, 16 },
+ { "RxMaxPp", MUSB_RXMAXP, 16 },
+ { "RxCSR", MUSB_RXCSR, 16 },
+ { "RxCount", MUSB_RXCOUNT, 16 },
+ { "ConfigData", MUSB_CONFIGDATA,8 },
+ { "IntrRxE", MUSB_INTRRXE, 16 },
+ { "IntrTxE", MUSB_INTRTXE, 16 },
+ { "IntrUsbE", MUSB_INTRUSBE, 8 },
+ { "DevCtl", MUSB_DEVCTL, 8 },
+ { "BabbleCtl", MUSB_BABBLE_CTL,8 },
+ { "TxFIFOsz", MUSB_TXFIFOSZ, 8 },
+ { "RxFIFOsz", MUSB_RXFIFOSZ, 8 },
+ { "TxFIFOadd", MUSB_TXFIFOADD, 16 },
+ { "RxFIFOadd", MUSB_RXFIFOADD, 16 },
+ { "VControl", 0x68, 32 },
+ { "HWVers", 0x69, 16 },
+ { "EPInfo", MUSB_EPINFO, 8 },
+ { "RAMInfo", MUSB_RAMINFO, 8 },
+ { "LinkInfo", MUSB_LINKINFO, 8 },
+ { "VPLen", MUSB_VPLEN, 8 },
+ { "HS_EOF1", MUSB_HS_EOF1, 8 },
+ { "FS_EOF1", MUSB_FS_EOF1, 8 },
+ { "LS_EOF1", MUSB_LS_EOF1, 8 },
+ { "SOFT_RST", 0x7F, 8 },
{ "DMA_CNTLch0", 0x204, 16 },
{ "DMA_ADDRch0", 0x208, 32 },
{ "DMA_COUNTch0", 0x20C, 32 },
--
2.1.2
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-11-10 20:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-10-27 20:48 [PATCH] usb: musb: replace hard coded registers with defines Roman Byshko
2014-11-03 16:08 ` Felipe Balbi
2014-11-10 18:31 ` Roman Byshko
2014-11-10 19:40 ` Felipe Balbi
2014-11-10 20:53 ` Roman Byshko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox