From: Willy Tarreau <w@1wt.eu>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Mikulas Patocka <mpatocka@redhat.com>, Willy Tarreau <w@1wt.eu>
Subject: [ 30/48] dm crypt: fix access beyond the end of allocated space
Date: Sun, 16 Nov 2014 22:53:58 +0100 [thread overview]
Message-ID: <20141116215329.896343849@1wt.eu> (raw)
In-Reply-To: <28c765bc23bd4bae1611534e510f49f8@local>
2.6.32-longterm review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mpatocka@redhat.com>
commit d49ec52ff6ddcda178fc2476a109cf1bd1fa19ed upstream
The DM crypt target accesses memory beyond allocated space resulting in
a crash on 32 bit x86 systems.
This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm
crypt: use async crypto"). However, this bug was masked by the fact
that kmalloc rounds the size up to the next power of two. This bug
wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio
data"). By switching to using per-bio data there was no longer any
padding beyond the end of a dm-crypt allocated memory block.
To minimize allocation overhead dm-crypt puts several structures into one
block allocated with kmalloc. The block holds struct ablkcipher_request,
cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))),
struct dm_crypt_request and an initialization vector.
The variable dmreq_start is set to offset of struct dm_crypt_request
within this memory block. dm-crypt allocates the block with this size:
cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size.
When accessing the initialization vector, dm-crypt uses the function
iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq
+ 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1).
dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request
structure. However, when dm-crypt accesses the initialization vector, it
takes a pointer to the end of dm_crypt_request, aligns it, and then uses
it as the initialization vector. If the end of dm_crypt_request is not
aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the
alignment causes the initialization vector to point beyond the allocated
space.
Fix this bug by calculating the variable iv_size_padding and adding it
to the allocated size.
Also correct the alignment of dm_crypt_request. struct dm_crypt_request
is specific to dm-crypt (it isn't used by the crypto subsystem at all),
so it is aligned on __alignof__(struct dm_crypt_request).
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[wt: minor context adaptations, hopefully ok]
Signed-off-by: Willy Tarreau <w@1wt.eu>
---
drivers/md/dm-crypt.c | 20 ++++++++++++++++----
1 file changed, 16 insertions(+), 4 deletions(-)
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 959d6d1..a44a908 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -998,6 +998,7 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
char *ivopts;
unsigned int key_size;
unsigned long long tmpll;
+ size_t iv_size_padding;
if (argc != 5) {
ti->error = "Not enough arguments";
@@ -1106,12 +1107,23 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv)
cc->dmreq_start = sizeof(struct ablkcipher_request);
cc->dmreq_start += crypto_ablkcipher_reqsize(tfm);
- cc->dmreq_start = ALIGN(cc->dmreq_start, crypto_tfm_ctx_alignment());
- cc->dmreq_start += crypto_ablkcipher_alignmask(tfm) &
- ~(crypto_tfm_ctx_alignment() - 1);
+ cc->dmreq_start = ALIGN(cc->dmreq_start, __alignof__(struct dm_crypt_request));
+
+ if (crypto_ablkcipher_alignmask(tfm) < CRYPTO_MINALIGN) {
+ /* Allocate the padding exactly */
+ iv_size_padding = -(cc->dmreq_start + sizeof(struct dm_crypt_request))
+ & crypto_ablkcipher_alignmask(tfm);
+ } else {
+ /*
+ * If the cipher requires greater alignment than kmalloc
+ * alignment, we don't know the exact position of the
+ * initialization vector. We must assume worst case.
+ */
+ iv_size_padding = crypto_ablkcipher_alignmask(tfm);
+ }
cc->req_pool = mempool_create_kmalloc_pool(MIN_IOS, cc->dmreq_start +
- sizeof(struct dm_crypt_request) + cc->iv_size);
+ sizeof(struct dm_crypt_request) + iv_size_padding + cc->iv_size);
if (!cc->req_pool) {
ti->error = "Cannot allocate crypt request mempool";
goto bad_req_pool;
--
1.7.12.2.21.g234cd45.dirty
next prev parent reply other threads:[~2014-11-16 22:01 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <28c765bc23bd4bae1611534e510f49f8@local>
2014-11-16 21:53 ` [ 00/48] 2.6.32.64-longterm review Willy Tarreau
2014-11-16 21:53 ` [ 01/48] x86_32, entry: Do syscall exit work on badsys Willy Tarreau
2014-11-16 21:53 ` [ 02/48] x86_32, entry: Store badsys error code in %eax Willy Tarreau
2014-11-16 21:53 ` [ 03/48] x86_32, entry: Clean up sysenter_badsys declaration Willy Tarreau
2014-11-16 21:53 ` [ 04/48] MIPS: Cleanup flags in syscall flags handlers Willy Tarreau
2014-11-16 21:53 ` [ 05/48] MIPS: asm: thread_info: Add _TIF_SECCOMP flag Willy Tarreau
2014-11-16 21:53 ` [ 06/48] fix autofs/afs/etc. magic mountpoint breakage Willy Tarreau
2014-11-16 21:53 ` [ 07/48] ALSA: control: Make sure that id->index does not Willy Tarreau
2014-11-16 21:53 ` [ 08/48] ALSA: control: Handle numid overflow Willy Tarreau
2014-11-16 21:53 ` [ 09/48] sctp: Fix sk_ack_backlog wrap-around problem Willy Tarreau
2014-11-16 21:53 ` [ 10/48] mm: try_to_unmap_cluster() should lock_page() before Willy Tarreau
2014-11-16 21:53 ` [ 11/48] filter: prevent nla extensions to peek beyond the end Willy Tarreau
2014-11-16 21:53 ` [ 12/48] ALSA: control: Protect user controls against Willy Tarreau
2014-11-16 21:53 ` [ 13/48] ptrace,x86: force IRET path after a ptrace_stop() Willy Tarreau
2014-11-16 21:53 ` [ 14/48] sym53c8xx_2: Set DID_REQUEUE return code when aborting Willy Tarreau
2014-11-16 21:53 ` [ 15/48] tcp: fix tcp_match_skb_to_sack() for unaligned SACK at Willy Tarreau
2014-11-16 21:53 ` [ 16/48] igmp: fix the problem when mc leave group Willy Tarreau
2014-11-16 21:53 ` [ 17/48] appletalk: Fix socket referencing in skb Willy Tarreau
2014-11-16 21:53 ` [ 18/48] net: sctp: fix information leaks in ulpevent layer Willy Tarreau
2014-11-16 21:53 ` [ 19/48] sunvnet: clean up objects created in vnet_new() on Willy Tarreau
2014-11-16 21:53 ` [ 20/48] ipv4: fix buffer overflow in ip_options_compile() Willy Tarreau
2014-11-16 21:53 ` [ 21/48] net: sctp: inherit auth_capable on INIT collisions Willy Tarreau
2014-11-16 21:53 ` [ 22/48] net: sendmsg: fix NULL pointer dereference Willy Tarreau
2014-12-01 11:45 ` Luis Henriques
2014-12-01 12:30 ` Willy Tarreau
2014-11-16 21:53 ` [ 23/48] tcp: Fix integer-overflows in TCP veno Willy Tarreau
2014-11-16 21:53 ` [ 24/48] tcp: Fix integer-overflow in TCP vegas Willy Tarreau
2014-11-16 21:53 ` [ 25/48] macvlan: Initialize vlan_features to turn on offload Willy Tarreau
2014-11-16 21:53 ` [ 26/48] net: Correctly set segment mac_len in skb_segment() Willy Tarreau
2014-11-16 21:53 ` [ 27/48] iovec: make sure the caller actually wants anything in Willy Tarreau
2014-11-16 21:53 ` [ 28/48] sctp: fix possible seqlock seadlock in Willy Tarreau
2014-11-16 21:53 ` [ 29/48] Revert "nfsd: correctly handle return value from Willy Tarreau
2014-11-16 21:53 ` Willy Tarreau [this message]
2014-11-16 21:53 ` [ 31/48] gianfar: disable vlan tag insertion by default Willy Tarreau
2014-11-16 21:54 ` [ 32/48] USB: kobil_sct: fix non-atomic allocation in write Willy Tarreau
2014-11-16 21:54 ` [ 33/48] fix misuses of f_count() in ppp and netlink Willy Tarreau
2014-11-16 21:54 ` [ 34/48] net: sctp: fix skb_over_panic when receiving malformed Willy Tarreau
2014-11-16 21:54 ` [ 35/48] tty: Fix high cpu load if tty is unreleaseable Willy Tarreau
2014-11-16 21:54 ` [ 36/48] netfilter: nf_log: account for size of NLMSG_DONE Willy Tarreau
2014-11-16 21:54 ` [ 37/48] netfilter: nfnetlink_log: fix maximum packet length Willy Tarreau
2014-11-16 21:54 ` [ 38/48] ring-buffer: Always reset iterator to reader page Willy Tarreau
2014-11-16 21:54 ` [ 39/48] md/raid6: avoid data corruption during recovery of Willy Tarreau
2014-11-16 21:54 ` [ 40/48] net: pppoe: use correct channel MTU when using Willy Tarreau
2014-11-16 21:54 ` [ 41/48] ARM: 7668/1: fix memset-related crashes caused by Willy Tarreau
2014-11-16 21:54 ` [ 42/48] ARM: 7670/1: fix the memset fix Willy Tarreau
2014-11-16 21:54 ` [ 43/48] lib/lzo: Update LZO compression to current upstream Willy Tarreau
2014-11-16 21:54 ` [ 44/48] Documentation: lzo: document part of the encoding Willy Tarreau
2014-11-16 21:54 ` [ 45/48] lzo: check for length overrun in variable length Willy Tarreau
2014-11-16 21:54 ` [ 46/48] USB: add new zte 3g-dongles pid to option.c Willy Tarreau
2014-11-16 21:54 ` [ 47/48] futex: Unlock hb->lock in futex_wait_requeue_pi() Willy Tarreau
2014-11-16 21:54 ` [ 48/48] isofs: Fix unbounded recursion when processing Willy Tarreau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141116215329.896343849@1wt.eu \
--to=w@1wt.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=mpatocka@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox