From: Johan Hovold <johan@kernel.org>
To: Laurentiu Palcu <laurentiu.palcu@intel.com>
Cc: Mark Brown <broonie@kernel.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Lee Jones <lee.jones@linaro.org>, Johan Havold <johan@kernel.org>,
Octavian Purdila <octavian.purdila@intel.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter
Date: Tue, 18 Nov 2014 18:06:27 +0100 [thread overview]
Message-ID: <20141118170627.GB22786@localhost> (raw)
In-Reply-To: <1416312599-5176-2-git-send-email-laurentiu.palcu@intel.com>
On Tue, Nov 18, 2014 at 02:09:58PM +0200, Laurentiu Palcu wrote:
> +/*
> + * Copy the data to DLN2 buffer and change the byte order to LE, requested by
> + * DLN2 module. SPI core makes sure that the data length is a multiple of word
> + * size.
> + */
> +static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> + memcpy(dln2_buf, src, len);
> +#else
> + if (bpw <= 8) {
> + memcpy(dln2_buf, src, len);
> + } else if (bpw <= 16) {
> + __le16 *d = (__le16 *)dln2_buf;
> + u16 *s = (u16 *)src;
> +
> + len = len / 2;
> + while (len--)
> + put_unaligned_le16(get_unaligned(s++), d++);
You said the dln2 buffer was properly aligned, right? Then you don't
need to use put_unaligned_lexx here...
> + } else {
> + __le32 *d = (__le32 *)dln2_buf;
> + u32 *s = (u32 *)src;
> +
> + len = len / 4;
> + while (len--)
> + put_unaligned_le32(get_unaligned(s++), d++);
> + }
> +#endif
> +
> + return 0;
> +}
> +
> +/*
> + * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
> + * buffer is LE ordered. SPI core makes sure that the data length is a multiple
> + * of word size.
> + */
> +static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
> +{
> +#ifdef __LITTLE_ENDIAN
> + memcpy(dest, dln2_buf, len);
> +#else
> + if (bpw <= 8) {
> + memcpy(dest, dln2_buf, len);
> + } else if (bpw <= 16) {
> + u16 *d = (u16 *)dest;
> + __le16 *s = (__le16 *)dln2_buf;
> +
> + len = len / 2;
> + while (len--)
> + put_unaligned(get_unaligned_le16(s++), d++)
...or get_unaligned_lexx here.
> + } else {
> + u32 *d = (u32 *)dest;
> + __le32 *s = (__le32 *)dln2_buf;
> +
> + len = len / 4;
> + while (len--)
> + put_unaligned(get_unaligned_le32(s++), d++)
> + }
> +#endif
> +
> + return 0;
> +}
Did you check the alignment of the SPI buffers as well? I'd assume they
were DMA-able and thus properly aligned, and then you do not need to use
any unaligned helpers above at all.
Johan
next prev parent reply other threads:[~2014-11-18 17:06 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-18 12:09 [PATCH v3 0/2] Add SPI support for Diolan DLN2 Laurentiu Palcu
2014-11-18 12:09 ` [PATCH v3 1/2] spi: add support for DLN-2 USB-SPI adapter Laurentiu Palcu
2014-11-18 17:06 ` Johan Hovold [this message]
2014-11-19 9:53 ` Laurentiu Palcu
2014-11-19 10:09 ` Johan Hovold
2014-11-19 10:47 ` [PATCH v4 " Laurentiu Palcu
2014-11-19 12:21 ` Johan Hovold
2014-11-19 13:07 ` [PATCH v5 " Laurentiu Palcu
2014-11-19 13:51 ` Johan Hovold
2014-11-19 14:12 ` Laurentiu Palcu
2014-11-26 10:09 ` [PATCH v6 " Laurentiu Palcu
2014-11-26 18:25 ` Mark Brown
2014-11-27 10:30 ` Laurentiu Palcu
2014-11-28 13:09 ` [PATCH v7 " Laurentiu Palcu
2014-11-28 14:10 ` Mark Brown
2014-11-28 14:57 ` Laurentiu Palcu
2014-11-28 15:14 ` Mark Brown
2014-11-28 15:31 ` Laurentiu Palcu
2014-11-28 16:01 ` Mark Brown
2014-11-28 18:13 ` Laurentiu Palcu
2014-11-28 18:35 ` Mark Brown
2014-11-28 19:27 ` Laurentiu Palcu
2014-11-28 19:46 ` Mark Brown
2014-11-28 19:21 ` Octavian Purdila
2014-12-05 18:34 ` Mark Brown
2014-11-18 12:09 ` [PATCH v3 2/2] mfd: dln2: add support for USB-SPI module Laurentiu Palcu
2014-11-19 16:29 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141118170627.GB22786@localhost \
--to=johan@kernel.org \
--cc=broonie@kernel.org \
--cc=laurentiu.palcu@intel.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=octavian.purdila@intel.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox